• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.15-20
• /
• 2016

Niobium is one of the most important and rarest metals, and is used in the electronic and energy industries. However, it's extremely high melting point and oxygen affinity limits the manufacture of Nb coating materials. Here, a Nb coating material is manufactured using a kinetic spray process followed by hot isotactic pressing to improve its properties. OM (optical microscope), XRD (X-ray diffraction), SEM (scanning electron microscopy), and Vickers hardness and EPMA (electron probe micro analyzer) tests are employed to investigate the macroscopic properties of the manufactured Nb materials. The powder used to manufacture the material has angular-shaped particles with an average particle size of $23.8{\mu}m$. The porosity and hardness of the manufactured Nb material are 0.18% and 221 Hv, respectively. Additional HIP is applied to the manufactured Nb material for 4 h under an Ar atmosphere after which the porosity decreases to 0.08% and the hardness increases to 253 Hv. Phase analysis after the HIP shows the presence of only pure Nb. The study also discusses the possibility of using the manufactured Nb material as a sputtering target.

• International Journal of Automotive Technology
• /
• 제8권3호
• /
• pp.383-394
• /
• 2007

Due to the clutch's non-linear dynamics, time-delays, external disturbance and parameter uncertainty, the automated clutch is difficult to control precisely during the launch process or automatic mechanical transmission (AMT) vehicles. In this paper, an enhanced fuzzy sliding mode controller (EFSMC) is proposed to control the automated clutch. The sliding and global stability conditions are formulated and analyzed in terms of the Lyapunov full quadratic form. The chattering phenomenon is handled by using a saturation function to replace the pure sign function and fuzzy logic adaptation system in the control law. To meet the real-time requirement of the automated clutch, the region-wise linear technology s adopted to reduce the fuzzy rules of the EFSMC. The simulation results have shown hat the proposed controller can achieve a higher performance with minimum reaching time and smooth control actions. In addition, our data also show that the controller is effective and robust to the parametric variation and external disturbance.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권8호
• /
• pp.1102-1106
• /
• 2009

The Tibetan Mastiff is one of the most archaic, ferocious and the largest dogs in the world. The Kunming dog is the chief working-dog breed in China. In this study, ten microsatellite loci were used to assess the genetic diversity and evolutionary relationships in six dog breeds, including Tibetan Mastiff, Kunming dog, Belgian Malinois, Labrador Retriever, English Springer Spaniel, and German Shepherd. The highest genetic diversity was exhibited by the Tibetan Mastiff, indicating useful protection and little inbreeding in the modern Tibetan Mastiff. Higher genetic diversity was observed in European breeds, supporting the hypotheses that breeders outcross their pure breed dogs occasionally to avoid deleterious effects in Europe. Evolutionary relationships showed that English Springer Spaniel and Labrador Retriever were clustered together, then with the Tibetan Mastiff, consistent with previous cluster results. German Shepherd and Kunming dog were grouped together, coinciding with the breeding history of Kunming dog. It is the first time that Tibetan Mastiff and Kunming dog have been analyzed with microsatellites.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.224-227
• /
• 2006

For estimation of three inherent optical properties (IOPs), the absorption coefficients for phytoplankton ($a_{ph}$) and suspended solid particle ($a_{ss}$) and dissolved organic matter ($a_{dom}$), from ocean reflectance, we used inversion of remote sensing reflectance model (Ahn et al., 2001) at this study. The IOP inversion model assumes that (1) the relationship between remote sensing reflectance ($R_{rs}$) and absorption (a) and backscattering ($b_{b}$) is well known, (2) the optical coefficients for pure water ($a_{w}$, $b_{bw}$) are known, (3) the spectral shapes of the specific absorption coefficients for phytoplankton ($a^*_{ph}$) and suspended solid particle ($a^*_{ss}$) and the specific backscattering coefficients for phytoplankton ($b_b^*_{ph}$) and suspended solid particle ($b_b^*_{ss}$) are known. The input data of IOP inversion model is used in-situ ocean optical data at the seawater around the Korea Peninsula for 5 years (2001-2005). We compared the output data of the IOP inversion model and the in-situ observation for seawater around the Korea Peninsula.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.135-138
• /
• 2008

Two bicarbazyl-containing fluorene copolymers, PFEBCz (95/5) and PFEBCz (75/25), were synthesized for white light electroluminescence from a single emitting polymer. All synthesized polymers were soluble in common organic solvents such as chloroform and toluene. The weight-average molecular weights (Mw) of the PFEBCz (95/5) and PFEBCz (75/25) copolymers were found to be 11,000 and 5,700 with polydispersity indices 1.4 and 1.8. The EL spectrum of the PFEBCz (75/25) device showed bright white-light emission with CIE coordinates of (0.32, 0.34) at 1000 cd/m2, which is very close to that for pure white (0.33, 0.33). This white emission may have been due to strong excimer formation between the bicarbazyl and fluorene polymer backbone. The device exhibited a maximum brightness of 3400 cd/m2 with a maximum efficiency of 0.2 cd/A.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1481-1485
• /
• 2020

The creep behavior of Ni-Cr-W alloy at 950 ℃ has been investigated by a novel creep testing system which is capable of in-situ measurement of strain. Tubular specimens were pressurized with argon gas for effective stresses up to 32 MPa. Experimental results show that the thermal fatigue reduces the creep life of the tubular specimens and with the introduction of thermal cycling fatigue the primary stage disappears and the creep rate higher than the pure thermal creep (without thermal fatigue). Also the creep behavior of Ni-Cr-W alloy doesn't consist in the secondary stage. A new creep equation has been derived and implemented into finite element method. The results from the finite element analyses are in good agreement with the creep experiment.

• Carbon letters
• /
• 제13권3호
• /
• pp.139-150
• /
• 2012

Poly-L-lactic acid (PLLA), PLLA/hydroxyapatite (HA), PLLA/multiwalled carbon nanotubes (MWNTs)/HA, PLLA/trifluoroethanol (TFE), PLLA/gelatin, and carbon nanofibers (CNFs)/${\beta}$-tricalcium phosphate (${\beta}$-TCP) composite membranes (scaffolds) were fabricated by electrospinning and their morphologies, and mechanical properties were characterized for use in bone tissue regeneration/guided tissue regeneration. MWNTs and HA nanoparticles were well distributed in the membranes and the degradation characteristics were improved. PLLA/MWNTs/HA membranes enhanced the adhesion and proliferation of periodontal ligament cells (PDLCs) by 30% and inhibited the adhesion of gingival epithelial cells by 30%. Osteoblast-like MG-63 cells on the randomly fiber oriented PLLA/TEF membrane showed irregular forms, while the cells exhibited shuttle-like shapes on the parallel fiber oriented membrane. Classical supersaturated simulated body fluids were modified by $CO_2$ bubbling and applied to promote the biomineralization of the PLLA/gelatin membrane; this resulted in predictions of bone bonding bioactivity of the substrates. The ${\beta}$-TCP membranes exhibit good biocompatibility, have an effect on PDLC growth comparable to that of pure CNF membrane, and can be applied as scaffolds for bone tissue regeneration.

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.474-481
• /
• 2005

본 연구에서는 공비점 분리제로써 벤젠을 사용하고 3기의 증류탑을 이용해서 에탄올 수용액으로부터 거의 순수한 무수 에탄올을 생산해 내는 공비증류공정에 대한 모델링과 최적화 작업을 수행하였다. 공비증류공정의 모사를 위한 열역학 모델식으로는 NRTL 액체 활동도계수 모델식을 사용하였으며 상용의 화학공정 모사기인 PRO/II with PROVISION 6.01을 사용하였다. 최적화 작업을 위한 목적함수로는 각 증류탑 재비기의 Heat duty로 정하였으며 농축기 탑상제품의 에탄올의 농도를 최적화 변수로 정하였다. 농축기 탑상 제품에서 에탄올 몰농도가 76 mole％일 때 증류탑의 재비기의 Heat duty의 합이 최소가 됨을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2001년도 International Meeting on Information Display
• /
• pp.209-212
• /
• 2001

We report the synthesis and characterization of new alkoxy substituted spirobifluorene derivatives. The spiro compounds having alkoxy hydrocarbon chains were readily soluble in common organic solvents, having improved film-forming properties and had a significantly reduced tendency to crystallize, resulting in increasing their service lifetime. The results of DSC showed that it was amorphous. The optical and electroluminescent spectra were characterized. Electroluminescence (EL) properties of three-layer light emitting diodes (LED) of $ITO/TPD/spirobifluorene/Alq_3/LiF/Al$ as the active layer were characterized. Blue emission peaking of the EL spectrum of the three-layer device at 402 nm and a luminance of 3,125 $cd/m^2$ were achieved at a drive voltage 12.8 V. The luminous efficiency was obtained to be 1.7 lm/W. The color coordinate in CIE chromaticity is (0.16, 0.09), which is in a pure blue region. The external quantum efficiency was obtained to be 2.0%. The results indicate that the spirobifluorene compounds having alkoxy hydrocarbon chains are strongly potential blue emitters for LED applications.

• 동력기계공학회지
• /
• 제11권3호
• /
• pp.66-72
• /
• 2007

This study proposed new method to decide the reference model necessary for design PID controller. In generally, control design problems using the reference model have the following two factors. One factor is that numerical model of the controlled system can be obtained extremely, and the other is that specification for the closed-loop dynamic performance is pure moderate. Therefore, the control design procedure is essentially based on the partial reference model matching which offers a reasonable method to simplify the design and the controller configuration under the controlled system uncertainty. ITAE(Integral of time-multiplied absolute error) performance index and Kitamori method etc. which were used a reference model method had a limit to settling time and rising time of reference model that it arrived to steady state response according to the controlled system. On this study, if it only knew peak time of overshoot and settling time by measurement signal of the controlled system, it can be made the reference model easily. We proposed new method to improve performance index of the reference model superior to existing reference model index and illustrate the numerical simulation results to show the effectiveness of proposed control method design.