• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.19-26
• /
• 2017

Polydimethylsiloxane (PDMS) 기판과 금속박막 사이의 중간층으로 parylene F를 사용한 신축패키지 구조에서 Au, Pt, Cu 박막의 신축변형에 따른 저항변화를 분석하였다. Parylene F 중간층을 코팅한 PDMS 기판에 스퍼터링한 150 nm 두께의 Au 박막과 Pt 박막은 각기 $1.56{\Omega}$ 및 $5.53{\Omega}$의 초기저항을 나타내었으며, 30% 인장변형률에서 각 박막의 저항증가비 ${\Delta}R/R_o$은 각기 7 및 18로 측정되었다. Cu 박막은 $18.71{\Omega}$의 높은 초기저항을 나타내었으며 인장변형에 따라 저항이 급격히 증가하다 5% 인장변형률에서 open 되어, Au 박막과 Pt 박막에 비해 매우 열등한 신축 특성을 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.447-449
• /
• 2004

The purpose of this study is measured surface acoustic wave(SAW) characteristics to confirm utilization possibility as SAW sensor using new Pb(Mg$_{1}$3/Nb$_{2}$3/) $O_3$-PbTiO$_3$ (PMN-PT) piezoelectric substrate. We have tried to see if the material can be practically available as a new surface acoustic wave (SAW) biosensor to detect protein. The experimental results clarified that the frequency filtering of the central frequency of the PMN-PT substrate is a superior result to that of the LiTaO$_3$ (LT) substrate, but the result was not completely satisfactory. We know there is a problem in the design of inter-digital transducer (IDT) pattern. The waves transferred through the input terminal forms SAW which is sure to be transferred to the direction of the output terminal and the backward direction of the input terminal. This reflected wave is reiterated with SAW, which is transferred to the output direction, and so the frequency filtering gives a not good result. The electromechanical coupling coefficient of the PMN-PT substrate is excellent, and we can use it as a SAW sensor, in the near future, provided that there will be a new IDT design to increase the frequency filtering.

• 마이크로전자및패키징학회지
• /
• 제21권3호
• /
• pp.67-71
• /
• 2014

본 연구에서는 Si(111) 기판을 이용하여 고품질의 GaN 박막을 성장하기 위하여 다양한 패턴을 갖는 Si 기판을 제작하였다. Si(111) 기판위에 이온 스퍼터(ion-sputter)를 이용하여 Pt 박막을 증착한 후 열처리(thermal annealing)하여 Pt 금속 마스크를 형성하고 유도 결합 플라즈마 이온 식각(inductively coupled plasma-reactive ion etching, ICP-RIE) 공정을 통하여 기둥(pillar)형태의 나노 패턴된 Si(111) 기판을 제작하였고 리소그래피 공정을 통하여 마이크로 패턴된 Si(111) 기판을 제작하였다. 일반적인 Si(111) 기판, 마이크로 패턴된 Si(111) 기판 및 나노 패턴된 Si(111) 기판위에 유기화학기상증착(metal organic chemical vapor deposition, MOCVD) 방법으로 GaN 박막을 성장하여 표면 특성과 결정성 및 광학적 특성을 분석하였다. 나노 패턴된 Si(111) 기판위에 성장한 GaN 박막은 일반적인Si(111) 기판과 마이크로 패턴된 Si(111) 기판위에 성장한 GaN 박막보다 표면의 균열과 거칠기가 개선되었다. 나노 패턴된 Si(111) 기판위에 성장한 GaN (002)면과 (102)면에 x-선 회절(x-ray diffraction, XRD) 피크의 반폭치(full width at half maximum, FWHM)는 576 arcsec, 828 arcsec으로 다른 두 기판위에 성장한 GaN 박막 보다 가장 낮은 값을 보여 결정성이 향상되었음을 확인하였다. Photoluminescence(PL)의 반폭치는 나노 패턴된 Si(111) 기판위에 성장한 GaN 박막이 46.5 meV으로 다른 기판위에 성장한 GaN 박막과 비교하여 광학적 특성이 향상되었음을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.410-416
• /
• 2001

KLN thin films were fabricated on Pt coated Si(100) wafer using an rf-magnetron sputtering method. The grown KLN thin film consists of 4-fold grains. In this experiment, the structure of 4-fold grained thin film was investigated using XRD and SEM measurements. Pt layer was also deposited using the rf-magnetron sputtering method,. XRD measurement showed that he Pt thin film has Gaussian distribution form with strong (111) direction orientation. The KLN thin film has preferred-orientation of (001) direction, and the peak consists of 2 separate peaks; one with broad FWHM and the other with narrow FWHM. The sharp peak is due to single crystal, and combining with Em results, the 4-fold grain consists of singel crystals with c-axis normal to substrate.

• 한국전기전자재료학회논문지
• /
• 제23권2호
• /
• pp.153-158
• /
• 2010

The crystallization of FePt/MgO(001) magnetic thin films of various thicknesses has been studied using synchrotron x-ray scattering, atomic force microscope, and vibrating sample magnetometer. In film with a 499-$\AA$-thick, face-centered tetragonal, ordered FePt phase was dominantly crystallized into perpendicular (001) grains keeping the magnetically easy c-axis normal to the film plane during annealing. In film with a 816-$\AA$-thick, however, longitudinal (110) grains keeping the c-axis parallel to the film plane were grown on top of the perpendicular (001) grains. The behavior of the magnetic properties was consistent with the thickness dependence of the crystallization. We attribute the thickness dependence of the crystallization to the substrate effect, which prefers the growth of the c-axis oriented perpendicular grains near the film/substrate interfacial area.

• 센서학회지
• /
• 제16권2호
• /
• pp.159-164
• /
• 2007

Thin films of platinum were deposited on a $Al_{2}O_{3}/ONO(SiO_{2}-Si_{3}N_{4}-SiO_{2})/Si$-substrate with an 2-inch Pt(99.99 %) target at room temperature for 20, 30 and 60 min by DC magnetron sputtering, respectively X-ray diffract meter (XRD) was used to analyze the crystallanity of the thin films and field emission scanning electron microscopy (FE-SEM) was employed for the investigation on crystal growth. The densification and the grain growth of the sputtered films have a considerable effect on sputtering time and annealing temperatures. The resistance of the Pt thin films was decreased with increasing deposition time and sintering temperature. Pt micro heater thin film deposited for 60 min by DC magnetron sputtering on an $Al_{2}O_{3}$/ONO-Si substrate and annealed at $600^{\circ}C$ for 1 h in air is found to be a most suitable micro heater with a generation capacity of $350^{\circ}C$ temperature and 645 mW power at 5.0 V input voltage. Adherence of Pt thin film and $Al_{2}O_{3}$ substrate was also found excellent. This characteristic is in good agreement with the uniform densification and good crystallanity of the Pt film. Efforts are on progress to find the parameters further reduce the power consumption and the results will be presented as soon as possible.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.509-513
• /
• 2000

The physical and electrical characteristics of MgO and Pt thin-films on it deposited by reactive sputtering and rf magnetron sputtering respectively were analyzed with annealing temperature and time by four point probe SEM and XRD. Under annealing conditions of 100$0^{\circ}C$ and 2 hr, MgO thin-film had the properties of improving Pt adhesion to SiO$_2$and insulation without chemical reaction to Pt thin-film and the sheet resistivity and the resistivity of Pt thin-film deposited on it were 0.1288 Ω/ and 12.88 $\mu$$\Omega$.cm respectively. We made Pt resistance pattern on SiO$_2$/Si substrate by life-off method and fabricated Pt thin-film type microheater for thermal microsensors by Pt-wire Pt-paste and SOG(spin-on-glass). In the temperature range of 25~40$0^{\circ}C$ we estimated TCR(temperature coefficient of resistance) and resistance ratio of thin-film type Pt-RTD(resistance thermometer device). We obtained TCR value of 3927 ppm/$^{\circ}C$ close to the bulk Pt value. Resistance values were varied linearly within the range of the measurement temperature. The thermal characteristics of fabricated thin-films type Pt micorheater were analyzed with Pt-RTD integrated on the same substrate. The heating temperature of Pt microheater could be up to 40$0^{\circ}C$ with 1.5 watts of the heating power.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권10호
• /
• pp.505-509
• /
• 2004

The (Sr/sub 0.9/Ca/sub 0.1/)TiO₃(SCT) thin films are deposited on Pt-coated electrode(Pt/TiN/SiO₂/Si) using RF sputtering method at various substrate temperature. The optimum conditions of RF power and Ar/O₂ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin film was about 18.75[Å/min]. The crystallinity of SCT thin films were increased with increase of substrate temperature in the temperature range of 100～500[℃]. The dielectric constant of SCT thin films were increased with the increase of substrate temperature, and changed almost linearly in temperature ranges of -80～+90[℃]. The current-voltage characteristics of SCT thin films showed the increasing leakage current as the substrate temperature increases.

• 한국재료학회지
• /
• 제31권8호
• /
• pp.439-444
• /
• 2021

The oxidation resistance of the diffusion aluminide bond coat (BC) is compromised largely by interdiffusion (ID) effects on coated turbine blades of aeroengines. The present study is designed to understand the influence of ID on βNiAl coatings or BC. In this regard, nickel substrate and CMSX-4 superalloy are deposited. In total, four sets of BCs are developed, i.e. pure βNiAl (on Ni substrate), simple βNiAl (on CMSX-4 substrate), Zr-βNiAl (on CMSX-4 substrate) and Pt-βNiAl (on CMSX-4 substrate). The main aim of this study is to understand the interdiffusion of Al, Zr and Pt during preparation and oxidation. In addition, the beneficial effects of both Zr and platinum are assessed. Pure βNiAl and simple βNiAl show Ni-out-diffusion, whereas for platinum inward diffusion to the substrate is noticed under vacuum treatment. Interestingly, Zr-βNiAl shows the least ID in all BCs and exhibit stability under both vacuum and oxidation treatments. However, its spallation resistance is slightly lower than that of Pt-βNiAl BC. All BCs show similar oxide growth trends, except for Zr-βNiAl, which exhibits two-stage oxidations, i.e. transient and steady-state. Moreover, it is suggested that the localized spallation in all BCs is caused by βNiAl - γ'-Ni₃Al transformation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.343-343
• /
• 2010

In this paper, Schottky barrier thin-film-transistors (SB-TFTs) with platinum silicide at source/drain region based on glass substrate were fabricated. Poly-silicon on glass substrates was crystallized by excimer laser annealing (ELA) method. The formation of pt-silicide at source/drain region is the most important process for SB-TFTs fabrication. We study the optimal condition of Pt-silicidation on glass substrate. Also, we propose this device as promising structure in the future.