• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.597-602
• /
• 2021

Even in the era of the 4th industrial revolution, the prevention of industrial accidents is still an important issue in industrial sites. In solving the problem of industrial safety, a product can be difficult to market if there is a lack of standard or method for a reliable performance evaluation. The purpose of this study was to develop and evaluate a test method for a wearable airbag product for protecting the body from falls that was newly developed to respond to fall accidents in industrial sites. As a research method, reliable evaluation standards were developed and applied through four stages of the evaluation and development process (Step 1: Product review, Step 2: Data research, Step 3: Expert meeting, Step 4: Drawing evaluation standard). In addition, the impact force was evaluated according to the developed evaluation standard. The fall impact force obtained through the evaluation showed a reduction effect of approximately 96% compared to the existing impact force. Therefore, the fall impact force was reduced significantly when the airbag was applied. This will enable new convergence products to be launched on the market and produce an environment where industrial workers can work safely.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.1
• /
• pp.1-15
• /
• 2021

Additive manufacturing (AM) for dental materials can produce more complex forms than conventional manufacturing methods. Compared to milling processing, AM consumes less equipment and materials, making sustainability an advantage. AM can be categorized into 7 types. Polymers made by vat polymerization are the most suitable material for AM due to superior mechanical properties and internal fit compared to conventional self-polymerizing methods. However, polymers are mainly used as provisional restoration due to their relatively low mechanical strength. Metal AM uses powder bed fusion methods and has higher fracture toughness and density than castings, but has higher residual stress, which requires research on post-processing methods to remove them. AM for ceramic use vat polymerization of materials mixed with ceramic powder and resin polymer. The ceramic materials for AM needs complex post-processing such as debinding of polymer and sintering. The low mechanical strength and volumetric accuracy of the products made by AM must be improved to be commercialized. AM requires more research to find the most suitable fabrication process conditions, as the mechanical properties and surface of any material will vary depending on the processing condition.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.1-10
• /
• 2021

Radiopharmaceuticals are drugs that contain radioisotopes and are used in the diagnosis, treatment, or investigation of diseases. Radiopharmaceuticals must be manufactured in compliance with good manufacturing practice regulations and subjected to quality control before they are administered to patients to ensure the safety of the drug. Radiopharmaceuticals for administration to humans need to be sterile and pyrogen-free. Hence, sterility tests and membrane filter integrity tests are carried out to confirm the asepticity of the finished drug product, and a bacterial endotoxin test conducted to assess contamination, if any, by pyrogens. The physical appearance and the absence of foreign insoluble substances should be confirmed by a visual inspection. The chemical purity, residual solvents, and pH should be evaluated because residual by-products and impurities in the finished product can be harmful to patients. The half-life, radiochemical purity, radionuclidic purity, and strength need to be assessed by analyzing the radiation emitted from radiopharmaceuticals to verify that the radioisotope contents are properly labeled on pharmaceuticals. Radiopharmaceuticals always carry the risk of radiation exposure. Therefore, the time taken for quality control tests should be minimized and care should be taken to prevent radiation exposure during handling. This review discusses the quality control procedures and acceptance criteria for a diagnostic radiopharmaceutical.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.387-394
• /
• 2020

In this research, a physical property test of CLSM, which can safely and effectively utilize a great number of industrial byproducts and waste types, was used to review the applicability of GBFS, FNS, and FGB, as well as their field applicabilities as cavity fillers, and the following conclusions have been reached. first, For CLSM utilizing GBFS, FNS, and FGB, it was revealed that a proper mixing of over 30% of GBFS and FNS or within 5% of FGB is effective in improving the fluidity for field application. second, It was revealed that GF15B5 can suppress bleeding at a similar level as the base, whereas GF30B5 can do so at about 0.17% compared to the base. It was also verified that GF15, GF30, and GF45 can suppress bleeding at about 0.2%, 0.26%, and 0.3%, respectively, compared to the base. third, Both GF15B5 and GF30B5 exceeded 0.4MPa in 7day strength tests to satisfy the field application and, also, the rates of increase of their initial strengths were found to be 323% and 233% higher than the base, respectively. Meanwhile, the 7day strength test of GF, which utilizes GBFS and FNS, also reached over 0.2MPa for field application, and it was revealed that GF15, GF30, and GF45 show 160%, 237%, and 185% higher strength increase rates, respectively, compared to the base.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.6
• /
• pp.403-408
• /
• 2021

Currently, in the design process of civil structures such as bridges, it is common to make final products by repeating the process of redesigning, if the initial design is found to not meet the standards after a structural review. This iterative process extends the design time, and causes inefficient consumption of engineering manpower, which should be put into higher-level design, on simple repetitive mechanical work. This problem can be resolved by automating the design process, but the external analysis program used in the design process has been the biggest obstacle to such automation. In this study, we constructed an AI-based automation system for the bridge design process, including an interface that could control both a reinforcement learning algorithm, and an external analysis program, to replace the repetitive tasks in the current design process. The prototype of the system built in this study was developed for a 2-span RC Rahmen bridge, which is one of the simplest bridge systems. In the future, it is expected that the developed interface system can be utilized as a basic technology for linking the latest AI with other types of bridge designs.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.163-170
• /
• 2022

There is a continuous rise in the commercialization of living modified (LM) organisms worldwide. While LM plants have not yet been cultivated in South Korea, research, development, import of products, and registration of related research facilities are progressing. LM plants should be tested in greenhouses and fields during development. Furthermore, environmental risk assessment and safety management should be performed before their release into the environment. Research on LM plant development is conducted in laboratories as well as confined greenhouses and fields. Safety management regulations are provided as combination standards for the LMO Act in each research district. The accidental release of the LM petunia in Japan was a significant incident related to LM plant research. It implies that normal plants within the distance of crossing should be regarded as LM plants. In the United States, LM creeping bentgrass was released into the environment, thus necessitating the establishment of stringent measures to prevent the scattering of LM plant seeds by wind or other mediums. In South Korea, LM Zoysia and LM cotton were released through rainwater. Therefore, safety measures that prevent LM seed mixing and plant vegetative propagules escaping into the environment via rainwater must be established. Preventing the dispersal of unapproved LM plants requires significant time, expenditure, and effort. Researchers should first identify the impact of LM plants on the ecosystem, and steps to avert their environmental release must be implemented.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.2
• /
• pp.309-327
• /
• 2022

As ICT convergence is progressing in all industrial fields and creating the global ecosystem of the supply chain is accelerating, supply chain risk related with cyber area are also increasing. In particular. the supply chain of ICT products is very complex in terms of technical and environmental factors to be managed, so it is vert difficult to transparently manage the entire life cycle. Accordingly, the US, UK, and EU, etc. are conducting and establishing cyber supply chainsecurity-related research and policies for ICT product supply chains. Korea also has the plan to establish management system to secure the supply chain of major ICT equipment as a task in the basic plan of the national cybersecurity strategy announced in 2019, but there is no concrete policy yet. So, In this paper, we review the cyber supply chain security management system in the United States and present a supplementary way to the National Information Security Manual in Korea from the perspective of cyber supply chain security. It is expected that this will serve as a reference material for cyber supply chain measures that can be introduced in domestic information security field.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.1-12
• /
• 2023

Function of salivary gland and saliva composition can be an indicator of individual's health status. Recently, saliva has been thought to have a high potential for usage in the biomedical field to diagnose, evaluate, and prevent systemic health due to the technological advances in analyzing and detecting small elements such as immunological and metabolic products, viruses, microorganisms, hormones in saliva. As a diagnostic specimen, saliva has some useful advantages compared to serum. Because of simple non-invasive method, saliva sampling is quite comfort for the patient, and it doesn't require specialists to collect samples. The possibility of infection during the collection process is also low. For this reason, proteins, genetic materials, and various biomarkers in saliva are actively being utilized on studying stress, microbiomics, genetics, and epigenetics. For the research on collecting big data related to systemic health, the needs on biobank has been focused. Regeneration of salivary gland based on tissue engineering has been also on advancement. However, there are still many issues to be solved, such as the standardization of sample collection, storage, and usage. This review focuses on the recent trends in the field of saliva research and highlight the future perspectives in biomedical and other applications.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.361-372
• /
• 2023

In this study, three luxury fashion start-up platforms, Balaan, Trenbe, and Must-it, were selected as research subjects. The purpose of this study is to compare and analyze the marketing mix strategies of each of the three online sites. The results of our study are as follows. First of all, the product strategies of the three luxury platform companies are characterized by the composition of products from high-end brands to SPA brands, and product composition such as kids, home living, Used goods and art in addition to women's and men's wear. In addition, the pricing strategies of luxury platforms show price differences depending on the luxury platform even for the same product. It is shown as a structure that directly determines margin. Therefore, in order to secure an edge in price competitiveness, each platform provided discount coupons and savings that are not available in offline stores such as department stores, providing opportunities to purchase luxury goods at a lower price than offline stores.Lastly, the sales promotion strategies of the three luxury platform companies was used include price discount promotions such as price discounts, discount coupons, and regular sales, and value-added sales such as membership registration/review points, events, product information, delivery services, social contribution activities, and SNS utilization.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.1
• /
• pp.69-88
• /
• 2023

Efficient spatial planning is one of the necessary factors to successfully respond to climate change. And researchers often use LULC(Land-Use/Cover) data to conduct land use and spatial planning research. However, LULC data has a limited number of grades related to urban surface, so each different urban structure appearing in several cities is not easily analyzed with existing land cover products. This limitation of land cover data seems to be overcome through LCZ(Local Climate Zone) data used in the urban heat island field. Therefore, this study aims to first discuss whether LCZ data can be applied not only to urban heat island fields but also to other fields, and secondly, whether LCZ data still have problems with existing LULC data. Research methodology is largely divided into two categories. First, through literature review, studies in the fields of climate, land use, and urban spatial structure related to LCZ are synthesized to analyze what research LCZ data is currently being used, and how it can be applied and utilized in the fields of land use and urban spatial structure. Next, the GIS spatial analysis methodology is used to analyze whether LCZ still has several errors that are found in the LULC.