• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.243-256
• /
• 2018

The purpose of this study was to investigate the effects of the anodization and cyclic calcification treatment on the surface characteristic and bioactivity of the titanium thin sheet in order to obtain basic data for the production of bioactive titanium membrane. A $30{\times}20{\times}0.08mm$ titanium sheets were prepared, and then they were pickled for 10 seconds in the solution which was mixed with $HNO_3:HF:H_2O$ in a ratio of 12: 7: 81. The $TiO_2$ nanotube layer was formed to increase the specific surface area of the titanium, and then the cyclic calcification treatment was performed to induce precipitation of hydroxiapatite by improvement of the bioactivity. The corrosion resistance test, wettability test and immersion test in simulated body solution were conducted to investigate the effect of these surface treatments. The nanotubes formed by the anodization treatment have a dense structure in which small diameter tubes are formed between relatively large diameter tubes, and their inside was hollow and the outer walls were coupled to each other. The hydroxyapatite precipitates were well combined on the nanotubes by the penetration into the nanotube layer by successive cyclic calcification treatment, and the precipitation of hydroxyapatite tended to increase proportionally after immersion in simulated body solution as the number of cycles increased. In conclusion, it was confirmed that induction of precipitation of hydroxyapatite by cyclic calcification treatment after forming the nanotube $TiO_2$ nanotube layer on the surface of the titanium membrane can contribute to improvement of bioactivity.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.569-579
• /
• 2019

In this study, the effect anti-oxidant, anti-inflammatory, and liver protective activity was investigated via quick ultrasonic disintegration of pine pollen using a probe sonicator (PS) followed by the extraction with water, 70% ethanol, and 100% ethanol. The anti-inflammatory effect was studied by measuring the production of nitric oxide (NO) and cytokine in RAW264.7 cells induced with lipopolysaccharides (LPS). The cell toxicity was also checked with an 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and the experiment was conducted using non-toxic $100{\mu}g/mL$. The NO inhibition rate was highest in the 70% ethanol PS group at $85.99{\pm}0.12%$. Also an excellent efficiency was obtained from the results of interlukin-1 beta ($IL-1{\beta}$) and tumor necrosis factor alpha ($TNF-{\alpha}$), which is related to inflammation-related cytokine, with the respective inhibition rates of 63 and 22%. To examine liver protective activity, HepG2 cells were treated with Taclin, and the generation of glutamic oxaloacetic transaminase (GOT) and lactate dehydrogenase (LDH) was measured in the culture solution. From GOT and LDH generation results, the inhibition rates in the 70% ethanol PS group were 28% and 13%, respectively, which was higher compared to that of using negative control group. Our results suggest that pine pollen extracted in 70% ethanol using PS may be used to develop food products that have anti-aging, anti-inflammatory, and liver protective effects.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.601-609
• /
• 2021

The fructification characteristics, fruit quality, and yield of the 'Hwangsil' jujube tree were analyzed at various stages of growth age (3-8 years old) to obtain basic data for developing high-quality jujube production technology. The average height, crown area, stem diameter near the root, stem clear length, the number of the main branches, and the distance between any two main branches were 230.8 cm (224.4~247.2 cm), 3.0 m² (2.1~3.8m²), 4.8 cm (2.4~6.2 cm), 69.1 cm (46.6~78.0 cm), 12.9 (8.6~19.6), and 8.1 cm (7.4~9.0 cm), respectively. Tree age was positively correlated with the crown area, stem diameter near the root, but stem clear length negatively correlated with the number of main branches. The average number of fruits per mother bearing shoot and tree was 20.0 (14.3~26.3) and 302.8 (257.3~373.5), respectively. There was no correlation between tree age and fructification characteristics, such as the number of fruit-bearing mother shoots per the main branch, the number of fruit-bearing shoots per fruit-bearing mother shoot, and the number of fruits per fruit-bearing shoot. Since the shape of the jujube tree is constantly managed based onthe growing area and type of greenhouse where the tree grown. The average fruit weight, fruit hardness, and soluble solid content were 24.2 g (22.4~26.8 g), 28.4 N (27.3~30.0 N), and 19.0% (17.1~19.8%), respectively, with no correlation between the tree age and fruit quality. The average yield was 7.4 kg per tree (5.7~9.1 kg), with significantly high quantities were produced in six and seven years old trees.

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.406-418
• /
• 2021

This study was conducted to evaluate optimal storage techniques for bare root plants and container seedlings of Quercus variabilis and Zelkova serrata in order to maintain high quality of seedlings until planting. Refrigerated storage treatments were given at two temperatures (-2℃ [freezing] and 2℃ [cooling]) for nine different durations (0, 15, 30, 60, 120, 180, 240, 300, and 360 days after storage). We analyzed total nonstructural carbohydrate (TNC) content and measured shoot moisture content (SMC) during the storage stage and survival rate (SR) and dry weight during the planting stage of seedlings. The TNC content and SMC of the seedlings of the two species decreased with an increase in storage duration. The TNC content of seedlings rapidly decreased after 180~240 days of storage. The TNC reduction rate in the freezing treatment was lower than that in the cooling treatment. Also, with an increase in the storage duration of the two species, the SMC reduction rate in the cooling treatment increased in comparison with that in the freezing treatment. In both the species, the SR after planting decreased rapidly after 60 days of cooling storage and 180 days of freezing storage, respectively. The SR after planting was less than 60% when the TNC content for both the species dropped below 20 mg g^-1. In addition, the SR was lower than 80% when SMC measured before storage decreased by approximately 30% and 20% for Q. variabilis and Z. serrata, respectively. Our results suggest that cooling (1~2℃) storage is recommended for a short-term period (2 months or less), whereas freezing (-2~-4℃) storage is suitable for longer periods (2~6 months). These optimal storage techniques, allied with seedling harvesting and handling systems, will improve the quality of seedling production in nursery stages and increase seedling growth performances in plantations.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.965-973
• /
• 2021

Since radiation therapy is irradiated with high-energy X-rays in a variety of at least 20 Gy to 80 Gy, a high dose is administered to the local area where the tumor is located, and various side effects of some normal tissues are expected. Currently, in clinical practice, lead, a representative material, is used as an effort to shield normal tissues, but lead is classified as a heavy metal harmful to the human body, and a large amount of skin contact can cause poisoning. Therefore, this study intends to manufacture a measurement sheet that can compensate for the limitations of lead using the materials Tungsten, Brass, and Copper of the 3D printer of the FDM (Fused Deposition Modeling) method and to investigate the penetration performance. Tungsten mixed filament transmission measurement sheet size was 70 × 70 mm and thickness 1, 2, 4 mm using a 3D printer, and a linear accelerator (TrueBeam STx, S/N: 1187) was measured by irradiating 100 MU at SSD 100 cm and 5 cm in water using a water phantom, an ion chamber (FC-65G), and an elcetrometer (PTW UNIDOSE), and the permeability was evaluated. As a result of increasing the measurement sheet of each material by 1 mm, in the case of Tungsten sheet at 3.8 to 3.9 cm in 6 MV, the thickness of the lead shielding body was thinner than 6.5 cm, and in case of Tungsten sheet at 4.5 to 4.6 cm in 15 MV. The sheet was thinner than the existing lead shielding body thickness of 7 cm, and equivalent performance was confirmed. Through this study, the transmittance measurement sheet produced using Tungsten alloy filaments confirmed the possibility of transmission shielding in the high energy region. It has been confirmed that the usability as a substitute is also excellent. It is thought that it can be provided as basic data for the production of shielding agents with 3D printing technology in the future.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.346-354
• /
• 2011

This study was carried out to fortify the antimicrobial activity of yoghurt by adding liquorice extract to it. The liquorice extracts (1 mg/mL) showed relatively high antibacterial activity against H. pylori KCCM 40449 (p < 0.05). The solvent liquorice extracts of minimal inhibitory concentrations (MIC) against H. pylori KCCM 40449 were 25- 100 ${\mu}g$/mL. Lactobacillus amylovorus DU-21 with high EPS production ability were inoulated to milk after the addition of different amounts of liquorice extracts (0.0%, 0.05%, 0.1% and 0.2%). The physico-chemical characteristics of yoghurts added with liquorice extracts were examined. The initial pH, titratable acidity, viscosity and viable cell counts of the yoghurt added liquorice extracts were 3.41-3.51, 1.021-1.091%, 1,686-1,930 cp and 9.41-9.38 Log CFU/mL, respectively. The viscosity and syneresis of yoghurt were better than that of the control. Antimicrobial activity against H. pylori KCCM 40449 increased with increasing addition of liquorice extract. However, the sensory score of yoghurt added with different amounts of liquorice extracts was lower than that of the control (p < 0.05). As a result of the sensory evaluations, the flavor, taste, texture, color and overall acceptability of the yoghurt with 0.05% liquorice extract were found to be much better than those of the other groups (p < 0.05). Overall, the optimal amount of liquorice extract added in the manufacture of yoghurt was 0.05% of the total weight. Further studies on increment of antimicrobial activity and palatability of liquorice extract added yoghurt are necessary.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.20-55
• /
• 2016

Koguryo's tomb mural paintings in North Korea are our precious cultural heritage which have been designated as UNESCO World Heritage property receiving high praise in the following criterion, i) exceptional creativeness of human being, ii) representative value showing the stage of development in construction history of East-Asia, iii) aesthetic superiority iv) uniqueness of building construction including tombs' ceiling. Mural paintings have been found from almost 100 tombs of the Koguryo dynasty out of 130 which are scattered across Huanren County, Lianoning Province, Ji'an, Jilin Province in China and Pyongyang in North Korea. Especially, most of them are gathered in Pyongyang from 4th and 5th century. Peculiarly, some of them have been constructed before King Jangsu's transfer of the capital to Pyongyang(AD 427). It can be regarded that Pyongyang territory had been under control of Koguryo and to become a new capital in the near future. And dense emergence of such tombs since the capital transfer from Gungnae City to Pyongyang during the reign of Jangsu is linked closely to the construction of tombs for rulers under strengthen royal authority of Jangsu and centralized system of authoritarian rule. Tomb mural paintings describe the owner's figure pictorially based on the truth just as in his living years. General lifestyles of ruling powers and sovereigns can be seen from the wall paintings portraying several buildings with various styles, figures, manners of living, which are considered that the tomb owner had led politically and sociologically in his life. In spite of not enough proofs to approve figure of architectures or "Gong-Po" in wall paintings on the tombs as those of Koguryo, it is persuasive with consideration for painting and decoration inside the tomb like wooden building in real life for the purpose of reenacting and continuing the tomb owner's luxurious life after death. "Du-Gong-Po-Zak" had appeared in company with Koguryo tomb murals and it can be found in most of the murals. And the emergence of substantial "Gong-Po-Do" can be counted more than a century ahead of the figure in murals. It could be a reasonable assumption as regards Koguryo tomb murals time of appearance match up with production period of Gahyungmyunggi(家形明器) and Hwasangseok(畵像石) Hwasangjeon(畵像塼) Design in the Mural Painting of the East-Han(東漢) Ancient Tombs in China. On this study, architectural "Gong-Po"s described in Koguryo tomb murals are categorized largely in "Bi(non)-Po-Zak-kye", "Jun(semi)-Po-Zak-kye", and "Po-Zak-kye" based on presence of "Ju-Du", "Cheom-Cha", and "Cheom-Cha-Sal-Mi" with developmental aspect, and, "Po-zak" is subdivided as "Bi(non)-Cheul-Mok" and "Cheul-Mok" types.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.175-190
• /
• 2018

Recently, policy of the marine advanced countries were switched from the preemption using ocean to post-project development. In this study, we suggest improvement and the pending issues when are deducted to the database of the marine spatial information is constructed over the GIS system for the Korean Marine Spatial Planning (KMSP). More than 250 spatial information in the seas of Korea were processed in order of data collection, GIS transformation, data analysis and processing, data grouping, and space mapping. It's process had some problem occurred to error of coordinate system, digitizing process for lack of the spatial information, performed by overlapping for the original marine spatial information, and so on. Moreover, solution is needed to data processing methods excluding personal information which is necessary when produce the spatial data for analysis of the used marine status and minimized method for different between the spatial information based GIS system and the based real information. Therefore, collection and securing system of lacking marine spatial information is enhanced for marine spatial planning. it is necessary to link and expand marine fisheries survey system. It is needed to the marine spatial planning. The marine spatial planning is required to the evaluation index of marine spatial and detailed marine spatial map. In addition, Marine spatial planning is needed to standard guideline and system of quality management. This standard guideline generate to phase for production, processing, analysis, and utilization. Also, the quality management system improve for the information quality of marine spatial information. Finally, we suggest necessity need for the depths study which is considered as opening extension of the marine spatial information and deduction on application model.

• Korean Journal of Environment and Ecology
• /
• v.33 no.3
• /
• pp.354-365
• /
• 2019

This study measured and analyzed the weather characteristics and the air-ion characteristics of walking space by land use type in Chungju, Chungcheongbuk Province during the heat wave. We used the land registration map to classify the type of land use in walking areas in the studied into the production and green area, the residential area, and the commercial area. We then selected 44 measurement points in about 4.1 km. They included 12 walking space points in the green area, 14 in the residential area, and 18 in the commercial area. Moreover, we calculated the ion index by analyzing the impact of weather factors such as temperature, relative humidity, solar radiation, and net radiation in the walking space on the anion generation and cation generation by land use type during the heat wave. Comparison of air ion characteristics in walking space by type of land use during the heat wave showed that the average cation generation was in the order of commercial area ($700.73cations/cm^3$) > residential area ($600.76cations/cm^3$) > green area ($589.73cations/cm^3$). The average anion generation was in the order of green area ($663.95anions/cm^3$) > residential area ($628.48anions/cm^3$) > commercial area ($527.48anions/cm^3$). The average ion index was in the order of green area (1.13) > residential area (1.04) > commercial area (0.75). This study checked the weather characteristics, cation generation, and anion generation in walking space according to the land use type during the heat wave and checked the difference of ion indexes in the walking space according to the land use type. However, there were limitations in the lack of accurate comparison according to the land use due to the moving measurement and the insufficient quantitative comparison according to the change of road width. Therefore, we recommend further studies that consider the road characteristics.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.221-233
• /
• 2019

In Korea, small and medium sized domestic enterprises(SMEs) play an pivotal role in the national economy, accounting for 99.9% of all enterprises, 87.9% of total employment, and 48.3% of production. and SMEs was driving a real force of the development of national economy in many respects such as innovation, job creation, industrial diversity, balanced regional development. Despite their crucial role in the national development, most of SMEs suffer from a lack of R&D capabilities and equipments as well as funding capacity. Public R&D institutes can provide SMEs with valuable supplementary technological knowledge and help them build technological capacity. so, In order to effectively support SMEs, government and public R&D institutes must be a priority to know about the factors influencing the performance related to technology transfer and technological collaborations. In particular, SMEs are not only taking up a large portion of the national economy, but also their influence in politics and economy so strong that raising the competitiveness of small and medium-sized companies is a national policy goal that must be achieved in order to achieve sustained economic growth. For this reason, it is necessary to look specifically at the relationship between concepts such as the environment, strategy, and organizational culture surrounding the enterprise to enhance the competitiveness of SMEs. The paper analyzes 665 companies to find out which organizational culture affects their performance by classification and type of business of SMEs. This study demonstrated that when SMEs seek consistency in their external environment, strategies, and organizational structure to maintain their continued competitiveness. According to three-way analysis of variance (3-way ANOVA) indicates that classification of industries in SMEs has statistically significant main effects, but the type of business and organizational culture do not have significant effects. However, the company's organizational performance (operating profit) of SMES were found to differ significantly in comparison between groups according to classification standards of industries, and therefore adopted some parts. In addition, an analysis of the effect of interaction between the three independent variables of small and medium-sized enterprises has shown that there are statistically significant interaction effects among classification, types of business, and organizational cultures. The results shows that there is an organizational culture suitable for each industry classification and type of business of an entity, and is expected to be used as a basis for establishing promotion policies related to the incubation and commerciality of small and medium-sized venture companies in the future.