1 |
E. T. Park, "Study on the characteristics of photoneutron produced in medical linear accelerators", The Korea Contents Society, Vol. 15, No. 6, pp. 283-289, 2015.
DOI
|
2 |
D. G. Jang, G. H. Kim, C. W. Park, "Analysis of Shielding Effect of Lead and Tungsten by use of Medical Radiation", Journal of the Korean Society of Radiology, Vol. 12, No. 2, pp. 173-178, 2018. http://dx.doi.org/10.7742/jksr.2018.12.2.173
DOI
|
3 |
J. S. Song, "Study on optimal process development of radiation protection", Journal of radiation protection and research, Vol. 5, No. 2, pp. 1-11, 1994.
|
4 |
E. T. Park, D. H. Lee, S. S. Kang, "Evaluation of Photoneutron by Hypofractionated Radiotherapy", The Journal of the Korea Contents Association, Vol. 15, No. 12, pp. 347-354, 2015. https://doi.org/10.5392/JKCA.2015.15.12.347
DOI
|
5 |
S. S. Chu, C. O. Suh, G. E. Kim, "Shielding for Critical Organs and Radiation Exposure Dose Distribution in Patients with High Energy Radiotherapy", Journal of radiation protection and research, Vol. 27, No. 1, pp. 1-10, 2002.
|
6 |
Y. S. Kim, M. D. Seo, W. K. Lee, Y. C. Jeong, S. W. Kim, I. T. Seo, J. B. Song, "The Usefulness Evaluation of Radiation Shielding Devices in PET Scan Procedures", The Korean Journal of Nuclear Medicine Technology, Vol. 14, No. 2, pp. 65-76, 2010.
|
7 |
M. Y. Kim, J. H. Lee, Y. G. Gwon, "Study of lead-free radiation shields based on Ceramics", The Korean Association for Radiation Protection, Vol. 17, pp. 358-359, 2011.
|
8 |
S. C. Kim, "Prediction of Shielding Performance by Thickness by Comparing the Single and Laminated Structures of Lead-free Radiation Fusion Shielding Sheets", Journal of the Korea Convergence Society, Vol. 12, No. 1, pp. 105-110, 2021. https://doi.org/10.15207/JKCS.2021.12.1.105
DOI
|
9 |
S. Y. Ji, "Study on Improvement of Tungsten Alloy Granular Powder in Defense Industry", Journal of the Korea Academia-Industrial cooperation Society. Vol. 21, No. 10, pp. 206-211, 2020. http://dx.doi.org/10.5762/KAIS.2020.21.10.206
DOI
|
10 |
Yin Wu, Yi Cao, Ying Wu, Dichen Li. "Mechanical Properties and Gamma-Ray Shielding Performance of 3D-Printed Poly-Ether-Ether-Ketone/Tungsten Composites", Materials, Vol. 13, No. 20, pp. 4475, 2020. https://doi.org/10.3390/ma13204475
DOI
|
11 |
H. Y. Kim, Y. S. Choi, S. Y. Park, Y. K. Park, S. J. Ye, "MOSFET Dosimetry for Evaluation of Gonad Shielding during Radiotherapy", Journal of radiation protection and research, Vol. 36, No. 1, pp. 23-27, 2011.
|
12 |
P. H. Giessen, "Calculation and measurement of the dose at points outside the primary beam for photon energies of 6, 10, and 23 MV", International Journal of Radiation Oncology Biology Physics, Vol. 30, No. 5, pp. 1239-1246, 1994. http://dx.doi.org/10.1016/0360-3016(94)90335-2
DOI
|
13 |
Y. I. Cho, J. H. Kim, "Evaluation of the Effectiveness of 3D Printing Shielding Devices using Monte Carlo Simulation in Plain", Radiography, Vol. 14, No. 3, pp. 303-311, 2020. http://dx.doi.org/10.7742/jksr.2020.14.3.303
DOI
|
14 |
S. H. Lee, S. Y. Cha, S. Y. Lee, "Aluminum, Copper and Lead as Shielding Materials in 6 MeV Electron Therapy", Vol. 14, No. 2, pp. 457-466, 2014. http://dx.doi.org/10.5392/JKCA.2014.14.02.457
DOI
|
15 |
ICRP, 1996 recommendations of the international commission on radiological protection : International Commission on Radiological Protection, ICRP Publication 73, 1996
|
16 |
H. M. Jang, J. Yoon, "Usefulness Evaluation and Fabrication of the Radiation Shield Using 3D Printing Technology", Journal of the Korea Society of the Korean Society of Radiology, Vol. 13, No. 7, pp. 1015-1524, 2019. http://dx.doi.org/10.7742/jksr.2019.13.7.1015
DOI
|
17 |
K. Y. Jeon, J. D. Lee, S. C. Kang, "3D Printing Industry Status and Market Trend. Korea Evaluation Institute of Industrial Technology", PD Issue Report, Vol. 16, No. 6, 2016.
|
18 |
J. H. Yun, J. A. Hou, W. G. Jang, J. H. Kim, H. S. Byun, "Preparation and Optimization of Composition of Medical X-ray Shielding Sheet Using Tungsten", Polymer Korea, Vol. 43, No. 3, pp. 346-350, 2019. http://dx.doi.org/10.7317/pk.2019.43.3.346
DOI
|
19 |
J. Yoon, M. S. Yoon, "A Study on the Effect of FFF 3D Printer Nozzle Size and Layer Height on Radiation Shield Fabrication", Journal of the Korean Society of Radiology, Vol. 14, No. 7, pp. 891-898, 2020. http://dx.doi.org/10.7742/jksr.2020.14.7.891
DOI
|