• 한국식품조리과학회지
• /
• 제20권2호
• /
• pp.196-203
• /
• 2004

The current study addresses the issue of whether the extent of cooperation between purchase and production departments relied on the food-items management, purchase process and cook's own job satisfaction. A self-administered questionnaire comprised of 61 statements was presented to the anonymous cooks to assess their perception of inter-departmental cooperation. Also, we asked them to evaluate the performance of food-items management, satisfaction with purchase process, i.e. purchase process, food-items, food suppliers, and job satisfaction. Out of 367 responses, 342 (93.2%) were available for analysis. The demographic characteristics of the respondents are presented and six hypotheses were tested using SPSS 11.0 and AMOS 5.0. The structural equation analysis revealed that the departmental cooperation between purchase and production departments, the exogenous variable, was not directly related with the respondents' job satisfaction. However, it was indirectly related with the job satisfaction through the two endogenous variables: -satisfaction with purchase process and performance of food-items management.

• 품질경영학회지
• /
• 제5권2호
• /
• pp.3-20
• /
• 1977

The purpose of this Study is to develope the Role of Statistics in Industrial mass production. The process of mass production will be divided into three steps, that is, Standardization, production and inspection. The Statistics is applied to Specificat-ions, Quality Control and Sampling inspection in these three steps. The applications have developed to Statistical methods based on probability theory. And then, The improved plan is exhibited the point of problems of introducting of spreading of quality control throughout field survey.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 추계학술대회
• /
• pp.557-561
• /
• 2011

The study proposes three types of production lead time according to the production or demand pattern. First of all, it discusses the difference of three lead times. While pitch time and cycle time are used in push system with process stock and mass conveyor production, the tact time is used in pull system like as JIT based lean production system.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.51-64
• /
• 1998

Mean shifts may be found in tool wear in machining, drawing, stamping and moulding operations, which make the process quality level deteriorate over time. In such situations, it is necessary to reset or readjust the manufacturing process at regular time basis or by inspection to prevent defective items produced. Although the deterioration rate may be assumed to be linear in a production cycle, there are many cases where the rate varies after resetting due to the variation of tool characteristics or by using the resharpened tools. In such cases, the deterioration rate should not be assumed to be a deterministic constant but a random variable. This paper is to find an optimal resetting period and quality level for such production processes.

• 품질경영학회지
• /
• 제22권1호
• /
• pp.188-204
• /
• 1994

Most of computer-aided process planning(CAPP) systems have been developed to automate the process planning function. In this paper, we describe an analytical model for a CAPP system in order to improve the performance of production system in flexible manufacturing systems(FMSs) for computer intergrated manufacturing(CIM) architecture. This paper proposes an optimal process planning that minimizes the load time by minimizing the cycle time and the number of workstations using Kang and Hahm's heuristic approach so as to improve the performance of production system under the batch production of discrete products. We also perform simulation using SIMAN language to campare the line utilization of each for various product types. The proposed algorithm can be implemented in existing FMSs for on-line control of product quantity using programmable logic controllers(PLC) and communication devices.

• 품질경영학회지
• /
• 제25권4호
• /
• pp.57-70
• /
• 1997

Consider a production system where all manufactured products are screened through automatic inspection equipment. The products for which the measured value of quality characteristic is larger than the lower screening specification limit (SL) and smaller than the u, pp.r screeing specification limit(SU) are accepted. Those smaller than SL are reworked and those larger than SU are excluded from the process. Assuming that the quality characteristic is normally distributed with known variance, this paper suggests cost models which involve inspection cost, production cost, rework cost, exclusion cost and quality cost, and presents the methods of finding the optimal values of the screening specification limits and the process target. Numerical example is given to demonstrate the a, pp.icability of the cost models suggested in this paper.

• 한국경영공학회지
• /
• 제23권4호
• /
• pp.73-86
• /
• 2018

Most electric products produced during the manufacturing process are produced after design and mass production under a given control standard. In particular, the development phase should present the criteria for the production process by setting appropriate limits based on the performance being targeted. Even if the standard of performance is set considering the performance of the process, measuring the performance of the product after actual production results will cause nonconformities with the expected results. Among the performance of electrical products, Energy standards represented by energy consumption efficiency continue to be of importance, and are mandatory standards that correspond to national standards in most countries. Therefore, statistical quality control of these standards shall basically have a large number of test equipment for each product, ensure sufficient test time and continuous sampling of product samples. In the end, companies that produce and sell electric appliances are striving to control mass production at a great cost, but this is not acceptable. This study presents basic characteristics of the energy efficiency of electrical products and proposes and conducts a case study on statistical production control methods for performance variation across products under the standards about domestic and international regulations.

• 산업공학
• /
• 제11권2호
• /
• pp.159-176
• /
• 1998

In the motor manufacturing system with the properties of short delivery and order based production, the process plan is performed individually for each order by the expert of process plan after the completion of the detail design process to satisfy the specification to be required by customer. Also it is hard to establish the standard process plan in reality because part routings and operation times are varied for each order. Hence, the production planner has the problem that is hard to establish the production schedule releasing the job to the factory because there occurs the big difference between the real time to be completed the process plan and the time to be required by the production planner. In this paper, we study the decision supporting system for the process plan based on knowledge base concept. First, we represent the knowledge of process planner as a database model through the modified POI-Feature graph. Then we design and implement the decision supporting system imbedded in the heuristic algorithm in the client/server environment using the ORACLE relational database management system.

• 대한안전경영과학회지
• /
• 제8권3호
• /
• pp.11-25
• /
• 2006

It is necessary to deal with the process capability index carefully because it has been developed with certain assumptions. Companies make a decision on processes through the results obtained by using and treating data extracted from the processes. However if they have incorrect or wrong results, they cannot lead to proper outputs but also bring to loss of the competition in quality. Therefore, this study will show a method to analysis Cp (process capability ; CP) and an idea of mass-production on Pp (process performance ; PP) based on the Sigma Estimate which is one of the uncertainty in the process capability index and makes a lot of error. To apply this method, it is essential to understand and to analyze the processes exactly. Especially, it is required to establish the more accurate process capability index that can quickly and properly respond to changes on processes to recognize the small changes on the process which lies in specification in mass production system that the continual monitoring of quality managers is required.

• 청정기술
• /
• 제9권2호
• /
• pp.87-100
• /
• 2003

본 연구는 청정생산기술의 개념을 염색가공분야에 도입시키기 위한 방법론을 제시한 것이다. 먼저 각 분야별 전문가로 이루어진 진단지도팀을 구성하여 대상업체에서 진행중인 제조공정 진행상태를 파악하고 사용하는 원부자재의 성능 및 환경적 분석과 폐수의 환경적 분석을 실시하였다. 원부자재(조제 및 염료)의 환경성은 TOC, CODMn, CODCr, $BOD_5$의 항목으로 평가하였고, 발생되는 폐수는 TOC, CODMn, CODCr, $BOD_5$, TDS, pH의 항목으로 평가하였다. 또 물질수지 분석과 LCA 평가 후 다음 단계로 공정, 에너지, 원부자재, 생산관리, 일반관리에서의 문제점을 도출한 후 그 중에서 개선 대상을 선정하고 마지막 단계에서 각 부분에 대해 지도하여 개선토록 한 후 최종 개선 효과를 분석하였다.