• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.255-257
• /
• 2006

This paper proposed a platform which includes both Network processor and DSP for flexible IED. The Network processor is one of the Intel's IXP4XX Product Line family and the DSP is one of the TI's C6000 family. An embedded Linux is ported in Network processor so that a DSP program can be downloaded to Network processor through ethernet and then downloaded to DSP. Using this method, various algorithms according to IED can be applied to the Network processor board. Maximum ten ADCs can be connected because there is a CPLD between DSP and ADC. That is, the network processor board which can measure maximum 40 channels is implemented. In DSP program, thread and double buffering methods are used not to miss voltage samples. The Network processor board is verified using a method that eight channel voltage signals converted to digital are transmitted to server through both DSP and IXP425.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.194-196
• /
• 2005

The command processor in satellite handles the capability of the process of command transmitted from ground station and deliver the processed data to on board computer in satellite. The command processor is consisted of redundant box to increase the reliability and availability of the capability. At each command processor, the processing time of each command processor is different, so the mismatch of processing time makes it difficult to timely synchronize the reception to on board computer and even will be became worse under the command processor's fault. To minimize the tine loss induced by the command processor's fault on board computer must analyze the time distribution of command propagation. This paper presents the logic of minimizing the delay error of command propagation the logic of analyzing the output of command processor.

• 한국군사과학기술학회지
• /
• 제8권2호
• /
• pp.30-37
• /
• 2005

In this paper, we propose how to design a fire control system main control board for individual combat weapons using a small and low power processor. To design an electric board of small weapon systems, Size and power consumption are very important factors. We solved the problem using selection of an adaptive processor, introduction of MicroChipPackaging method, and separate design of a main board Also we applied these methods to make the fire control system for small arms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.1014-1017
• /
• 2003

In this paper, after the crypto acceleration board of the server-termination type is designed, we implement the Elliptic Curve Digital Signature Algorithm on the board that serves data integrity and user authentication. For implementing ECDSA, we use crypto co-processor, MPC180, to reduce the computation burden of main Processor (MPC860) on the board. By using crypto co-processor, the computation efficiency in case prime field is improved more between 90 and 100 times than the software library and between 20 and 90 times in case binary field. Our result is expect to apply for SSL acceleration board.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.685-691
• /
• 1993

This paper introduces a PC-based image data processing unit that is composed of preprocessor board and main processor board; The preprocessor contains Inmos A110 processor and efficient H/W architecture for fast mask/logic operations at the speed of video signal rate. It is controlled by the main processor which communicates with the host PC. The main processor board contains TI TMS320C31 digital signal processor, and can access the frame memory of the processor for extra S/W tasks. We test 3*3, 5*5 masks and logic operations on 386/486/DSP and compare the result with that of the proposed unit. The result shows ours are extremely faster than conventional CPU based approach, that is, over several hundred times faster than even DSP.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.626-631
• /
• 1997

This paper represents the design of a real-time image preprocessing system. The preprocessing system performs hardware-wise mask operations and thresholding operations at the speed of camera output single rate. The preprocessing system consists of the preprocessing board and the main processing board. The preprocessing board includes preprocessing unit that includes a $5\times5$ mask processor and LUT, and can perform mask and threshold operations in real-time. To achieve high-resolution image input data($20485\timesn$), the preprocessing board has a linescan camera interface. The main processing board includes the image processor unit and main processor unit. The image processor unit is equipped with TI's TMS320C32 DSP and can perform image processing algorithms at high speed. The main processor unit controls the operation of total system. The proposed system is faster than the conventional CPU based system.

• 한국전자통신학회논문지
• /
• 제17권4호
• /
• pp.633-640
• /
• 2022

다양한 분야에 서비스 로봇이 적용됨에 따라 각 임무에 적합한 영상처리 알고리즘을 빠르고 정확하게 수행할 수 있는 영상처리 프로세서에 관한 관심이 높아지고 있다. 본 논문에서는 로봇에 적용 가능한 영상처리 프로세서 설계방법을 소개한다. 제안한 프로세서는 CPU, GPU, FPGA가 융합된 형태로 AGX 보드, FPGA 보드, LiDAR-Vision 보드, Backplane 보드로 구성된다. 제안한 방법은 시뮬레이션 실험을 통해 검증한다.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.149-158
• /
• 1996

In this paper we describe designing and implementing a digital neural chip and a parallel neural machine for simulating large scale neural netsorks. The chip is a single-chip multiprocessor which has four digiral neural processors (DNP-II) of the same architecture. Each DNP-II has program memory and data memory, and the chip operates in MIMD (multi-instruction, multi-data) parallel processor. The DNP-II has the instruction set tailored to neural computation. Which can be sed to effectively simulate various neural network models including on-chip learning. The DNP-II facilitates four-way data-driven communication supporting the extensibility of parallel systems. The parallel neural machine consists of a host computer, processor boards, a buffer board and an interface board. Each processor board consists of 8*8 array of DNP-II(equivalently 2*2 neural chips). Each processor board acn be built including linear array, 2-D mesh and 2-D torus. This flexibility supports efficiency of mapping from neural network models into parallel strucgure. The neural system accomplishes the performance of maximum 40 GCPS(giga connection per second) with 16 processor boards.

• 전자공학회논문지 IE
• /
• 제47권3호
• /
• pp.1-6
• /
• 2010

본 논문에서는 문자나 그래픽 같은 매우 간단한 메시지만을 표출하고 있는 소형 LED 전광판에서도 동영상이 표출될 수 있도록 임베디드 시스템을 이용한 프로세서를 설계하였다. 구현 방법으로는 임베디드 시스템에서 출력되는 24Bit의 디지털 동영상을 표출할 수 있도록 하기위하여 비디오 프로세서와 LED Display Panel을 설계한 동영상 LED 전광판을 제작하였다. 감마 보정, 밝기, 색 대비조정, 스케줄 기능, 인터넷에 의한 표출영상 변환 및 저장장치를 내장하였으며, 그래픽, 동영상 등을 소형LED 전광판에서 표출할 수 있도록 Windows CE 기반의 응용 프로그램을 설계하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.288-294
• /
• 2011

본 논문에서는 FPGA기반의 SoC보드(Xilinx Virtex-4 ML401 EVM)를 이용한 전력인버터제어시스템을 설계하였다. 선박에 전력시스템을 적용하기 위해서 선박의 최신 통신 프로토콜인 NMEA 2000 표준 프로토콜을 적용하였으며 전력 시스템의 성능을 평가하기 위한 PC기반의 모니터링 프로그램을 제작하였다. 전력 제어시스템은 FPGA기반의 임베디드 SoC보드상에서 이중프로세서(Dualprocessor)형태로 설계하였으며 이중프로세서를 적용함으로써 실시간 제어 감시가 가능하다. 이중프로세서 중 하나는 전력 제어를 위한 PWM신호생성 및 전력 회로내의 주요 전력 파라미터를 센싱 하는 제어용 프로세서로 동작하며(Control processor) 다른 프로세서는 제어프로세서의 각종 전력 센서 파라미터와 제어 파라미터들을 이중포트 램(Dual Port RAM)을 이용하여 정보를 공유하고 외부 NMEA 2000프로토콜 기반의 모니터링 장치와 네트워크 기반의 통신을 수행하는 통신용 프로세서(Communication processor)로 구성된다. 본 논문에서 제작한 전력 제어시스템은 선박내의 분산발전,송배전 및 전압 레귤레이션 시스템에 적용 될 수 있다.