• Journal of Korea Water Resources Association
• /
• v.43 no.7
• /
• pp.667-679
• /
• 2010

The distributed hydrologic model has been considerably improved due to rapid development of computer hardware technology as well as the increased accessibility and the applicability of hydro-geologic information using GIS. It has been acknowledged that physically-based distributed hydrologic model require significant amounts of data for their calibration, so its application at ungauged catchments is very limited. In this regard, this study was intended to develop a distributed hydrologic model (S-RAT) that is mainly based on conceptually grid-based water balance model. The proposed model shows advantages as a new distributed rainfall-runoff model in terms of their simplicity and model performance. Another advantage of the proposed model is to effectively assess spatio-temporal variation for the entire runoff process. In addition, S-RAT does not rely on any commercial GIS pre-processing tools because a built-in GIS pre-processing module was developed and included in the model. Through the application to the two pilot basins, it was found that S-RAT model has temporal and spatial transferability of parameters and also S-RAT model can be effectively used as a radar data-driven rainfall-runoff model.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.539-550
• /
• 2003

As the service of mobile internet has been expended, student users are increase. The computers have been widely used in a education field as the teaching tool by improvement of the multimedia contents processing and user interface. The English learning using the computers in the restricted education environment provides motivations and effective learning to learners, but still have some problem such as teaching and evaluating without consideration for differences of individual levels. In order to solve the problems and take the advantages, we propose the intelligent tutoring system for english learning with mobile technology. Overcoming limitations of the mobile environment and using proper treacher's roles,. We have applied the conventional estimation method of the intellectual learner level for students. Also, we have proposed the diagnostic function in order to determine the method of teaching-learing and item disposition that each leaner prefers. Then we have designed and implemented the expert module, providing the feedback for teaching, of the intelligent turoring system for mobile english learning. This system will be able to support the interaction between teachers and students and replace some roles of teacher in the mobile english learning.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.545-559
• /
• 2020

In this paper, we propose a content creation framework that enables users without programming experience to easily create interactive media content that responds to user gestures. In the proposed framework, users define the gestures they use and the media effects that respond to them by numbers, and link them in a text-based configuration file. In the proposed framework, the interactive media content that responds to the user's gesture is linked with the dynamic projection mapping module to track the user's location and project the media effects onto the user. To reduce the processing speed and memory burden of the gesture recognition, the user's movement is expressed as a gray scale motion history image. We designed a convolutional neural network model for gesture recognition using motion history images as input data. The number of network layers and hyperparameters of the convolutional neural network model were determined through experiments that recognize five gestures, and applied to the proposed framework. In the gesture recognition experiment, we obtained a recognition accuracy of 97.96% and a processing speed of 12.04 FPS. In the experiment connected with the three media effects, we confirmed that the intended media effect was appropriately displayed in real-time according to the user's gesture.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.710-721
• /
• 2010

Recently, for the advancement of embedded technology about mobile device, a new kind of service, mash-up is appeared. It is service or application combining multimedia content making tool or device and web-GIS(geographic information system) service in the mobile environment. This service can be ease to use for casual user and can apply in various ways. So, It is served in web 2.0 environment actively. But, in the mashup service, because generated multimedia contents linked with web map are new type of multimedia contents which include user's migration routes in the space such as GPS coordinates. Thus, there are no protection ways for intellectual property created by GIS web-map service users and user's privacy. In this paper, we proposed a location and user information hiding scheme for GIS web-map service. This scheme embeds location and user information into a picture that is taken by camera module on the mobile phone. It is not only protecting way for user's privacy but is also tracing way against illegal photographer who is peeping person through hidden camera. And than, we also realized proposed scheme on the mobile smart phone. For minimizing margin of error about location coordinate value against contents manipulating attacks, GPS information is embedded into chrominance signal of contents considering weight of each digit about binary type of GPS coordinate value. And for tracing illegal photographer, user information such as serial number of mobile phone, phone number and photographing date is embedded into frequency spectrum of contents luminance signal. In the experimental results, we confirmed that the error of extracted information against various image processing attacks is within reliable tolerance. And after file format translation attack, we extracted embedded information from the attacked contents without no damage. Using similarity between extracted one and original templete, we also extracted whole information from damaged chrominance signal of contents by various image processing attacks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.292-295
• /
• 2003

This paper presents the architecture and its function of Tool server. MPEG-21 will enable all-electronic creation, delivery and trade of digital multimedia content and transparent usage of various content types on network device. Therefore, we can provide access to information and services from almost anywhere at anytime with various terminals and networks. In order to support multimedia delivery chain that contains content creation, production, delivery and consumption, we need some elements to identify, describe, manage and protect the contents. Thus, we define Digital Item Processing(DIP), Digital Item Adaptation(DIA) server and Tool server as primary objects of MPEG-21 multimedia framework. DIP provides a function which creates and consumes Digital Item(DI) as a kind of a digital object by user. DIA server adapts the original DI to the usage environment description sent from the terminal and transmits the adapted DI to the terminal. Tool sewer searches for a tool requested from DIP or DIA and downloads the best tool to DIP or DIA server. In this paper, we present how Tool server is organized and is used among 2 primary objects. The paper is structured as following: Section 1 briefly describes why MPEG-21 is needed and what MPEG-21 wants. We see the basic architecture of tool server and its functionality by each module in section 2. Section 3 explains a scenario that tool server transmits tool to DIP or DIA. The paper concludes in section 4.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.117-125
• /
• 2017

Purpose: Damage to pulse crops by wild birds is a serious problem. The damage is to such an extent that the rate of damage during the period between seeding and cotyledon stages reaches 54.6% on an average. In this study, a crop-position detection method was developed wherein infrared (IR) sensors were used to determine the cotyledon position under a vinyl mulch. Methods: IR sensors that helped measure the temperature were used to locate the cotyledons below the vinyl mulch. A single IR sensor module was installed at three locations of the crops (peanut, red lettuce, and crown daisy) in the cotyledon stage. The representative thermal response of a $16{\times}4$ pixel area was detected using this sensor in the case where the distance from the target was 25 cm. A spatial image was applied to the two-dimensional temperature distribution using a non-integral moving-average method. The collected data were first processed by taking the moving average via interpolation to determine the frame where the variance was the lowest for a resolution unit of 1.02 cm. Results: The temperature distribution was plotted corresponding to a distance of 10 cm between the crops. A clear leaf pattern of the crop was visually confirmed. However, the temperature distribution after the normalization was unclear. The image conversion and frequency-conversion graphs were obtained based on the moving average by averaging the points corresponding to a frequency of 40 Hz for 8 pixels. The most optimized resolutions at locations 1, 2, and 3 were found on 3.4, 4.1, and 5.6 Pixels, respectively. Conclusions: In this study, to solve the problem of damage caused by birds to crops in the cotyledon stage after seeding, the vinyl mulch is punched after seeding. The crops in the cotyledon stage could be accurately located using the proposed method. By conducting the experiments using the single IR sensor and a sliding mechanical device with the help of a non-integral interpolation method, the crops in the cotyledon stage could be precisely located.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.2
• /
• pp.165-182
• /
• 2001

In this paper, we describe a design and implementation of the Wireless Markup Language(WML) compiler to deploy wireless Internet services effectively. The WML compiler translates textual WML decks into binary ones in order to reduce the traffic on wireless links that have relatively low bandwidth to wireline links and mitigate the processing overhead of WML decks on, wireless terminals that have relatively low processing power to fixed workstations. In addition, it takes over the overhead of eXtensible Markup Language(XML) well-formedness and validation processes. The WML compiler consists of the lexical analyzer and parser modules. The granunar for the WML parser module is LALR(1) context-free grammar that is designed based on XML 1.0 and WML 1.2 DTD(Document Type Definition) with the consideration of the Wireless Application Protocol Binary XML grammar. The grammar description is converted into a C program to parse that grammar by using parser generator. Even though the tags in WML will be extended or WML DTD will be upgraded, this approach has the advantage of flexibility because the program is generated by modifying just the changed parts. We have verified the functionality of the WML compiler by using a WML decompiler in the public domain and by using the Nokia WAP Toolkit as a WAP client. To measurethe compressibility gain of the WML compiler, we have tested a large number of textual WML decks and obtained a maximum 85 %. As the effect of compression is reduced when the portion of general textual strings increases relative to one of the tags and attributes in a WML deck, an extended encoding method might be needed for specific applications such as compiling of the WML decks to which the Hyper Text Markup Language document is translated dynamically.

• Education of Primary School Mathematics
• /
• v.14 no.3
• /
• pp.237-259
• /
• 2011

Mathematics learning disabilities is a specific learning disorder affecting the normal acquisition of arithmetic and spatial skills. Reported prevalence rates range from 5 to 10 percent and show high rates of comorbid disabilities, such as dyslexia and ADHD. In this study, the characteristics and the causes of this disorder has been examined. The core cause of mathematics learning disabilities is not clear yet: it can come from general cognitive problems, or disorder of innate intuitive number module could be the cause. Recently, researchers try to subdivide mathematics learning disabilities as (1) semantic/memory type, (2) procedural/skill type, (3) visuospatial type, and (4) reasoning type. Each subtype is related to specific brain areas subserving mathematical cognition. Based on these findings, the author has performed a basic research to develop grade specific diagnostic tests: number processing test and math word problems for lower grades and comprehensive math knowledge tests for the upper grades. The results should help teachers to find out prior knowledge, specific weaknesses of students, and plan personalized intervention program. The author suggest diagnostic tests are organized into 6 components. They are number sense, conceptual knowledge, arithmetic facts retrieval, procedural skills, mathematical reasoning/word problem solving, and visuospatial perception tests. This grouping will also help the examiner to figure out the processing time for each component.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.754-766
• /
• 1997

In this paper,we implement the Audit Trail Service Sydtem for the EDI Security.It has solved a law dispute between enterprises by informations that have generated by the EDI serice systrm.The audit trail service sys-tem implemented for EDI security satisfied the requirements of audit and the protocol of the security serive of X.435 and X.400.The EDI Security Audit System consists of the event discrimiator,the audit recirder,the audit archiver,and the provider of audit services .The event discriminator classified the reansmitted data from the EDI network ot audit sercices.The audit recorder constructs an index that has combined time information wiht audit unformations which are classified by the event discriminator.ZThe audit archiver performas the vacumming of added audit imformations by passing time by passing time.The audit provider is a module that carries out the audit trail servies by using stored audit informations. The audit provider suports audit servies,which are non-requdiation,proof and probe,controller of security,and accesing infrimation.The audit trail service system for EDI security constructs audit information by using index that is combining time imfromation,so it supports especially fast accesing audit information.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.107-113
• /
• 1999

The purpose of this study was to develop a miniature imaging gamma probe with high performance that can detect small or residual tumors after surgery. Gamma probe detector system consists of NaI(Tl) scintillator, position sensitive photomultiplier tube (PSPMT), and collimator. PSPMT was optically coupled with 6.5 mm thick, 7.62 cm diameter of NaI(Tl) crystal and supplied with -1000V for high voltage. Parallel hexagonal hole collimator was manufactured for characteristics of 40-mm hole length, 1.3-mm hole diameter, and 0.22 mm septal thickness. Electronics consist of position and trigger signal readout systems. Position signals were obtained with summing, subtracting, and dividing circuit using preamplifer and amplifier. Trigger signals were obtained using summing amplifier, constant fraction discriminator, and gate and delay generator module with preamplifer. Data acquisition and processing were performed by Gamma-PF interface board inserted into pentium PC and PIP software. For imaging studies, flood and slit mask images were acquired using a point source. Two hole phantom images were also acquired with collimator. Intrinsic and system spatial resolutions were measured as 3.97 mm and 5.97 mm, respectively. In conclusion, Miniature gamma probe images based on the PSPMT showed good image quality, we conclude that the miniature imaging gamma probe was successfully developed and good image data were obtained. However, further studies will be required to optimize imaging characteristics.