• Title/Summary/Keyword: Process assessment

Search Result 4,101, Processing Time 0.031 seconds

A Comparative Study on Radiochemical Pre-treatment Methods for Airborne Uranium-Isotropic Analysis (공기 중 우라늄 동위원소 분석을 위한 방사화학 전처리방법에 대한 비교 분석 연구)

  • Kang, Han-Byeol;Chung, Heejun;Park, Seunghoon;Shin, Jung-Ki;Kwak, Sung-Woo
    • Journal of Radiation Protection and Research
    • /
    • v.40 no.2
    • /
    • pp.101-109
    • /
    • 2015
  • Alpha spectrometry is typically used for the assessment of uranium particle concentrations and its accuracy can be directly related to the accuracy in which the radiochemical pre-treatment is conducted. Ashing and alkali fusion methods are typically used but the ashing method requires longer analysis time and the alkali fusion method is extremely costly. Therefore, a new pre-treatment method using ultrasonic cleaning was developed and its experimental result was compared against the two conventional methods in terms of pre-treatment time, convenience, cost, and recovery rate of a target material. The results that were obtained by the conventional methods(ashing and alkali fusion) and the new method were compared. Consequently, even though the shorter pre-treatment time was required, the new technique showed almost same recovery rate comparing with two conventional methods. The new method was also featured by its relatively lower cost and a simpler process than two conventional methods.

The Influences of Coteaching through Mentoring upon Pedagogical Content Knowledge of Beginning Science-Gifted Education Teachers (멘토링을 통한 코티칭이 초임 과학영재교육 담당교사들의 교과교육학지식에 미치는 영향)

  • Noh, Taehee;Yang, Chanho;Lee, Jaewon;You, Jiyeon;Kang, Hunsik
    • Journal of The Korean Association For Science Education
    • /
    • v.33 no.5
    • /
    • pp.1021-1040
    • /
    • 2013
  • In order to explore the influences of coteaching through mentoring upon the teaching professionalism of beginning science-gifted education teachers, this case study deeply investigated the change processes in the aspects of pedagogical content knowledge (PCK). Two beginning teachers planned, performed and reflected together their science instructions for science-gifted students in secondary school during four 3-hour classes. Since the second instruction, pre-, during-, and post-mentoring were conducted, we collected various data related to teachers' planning processes, videotaped all coteaching science classes, and wrote field notes. We also recorded in-depth interviews with the teachers and the whole process of mentoring. All the data were analyzed by using the constant comparative method. The results of the analyses indicated that coteaching through mentoring positively changed the teachers' PCK. Above all, we found that coteaching and mentoring strategies generated a significant synergy effect through a mutually complementary relationship. The teachers developed deep practical knowledge about the enrichment curriculum, which placed more emphasis on developing cognitive and/or affective characteristics of science-gifted students. The teachers also improved their knowledge about the characteristics of science-gifted students and the instructional strategies appropriate for developing them. Moreover, practical knowledge about assessment domains and methods used in science-gifted education were improved. Knowledge on science content necessary for effective inquiry instruction was also improved.

An analysis on satisfaction level of clinicians on implant surgical guidance system based on computed tomography (컴퓨터 단층 촬영을 기반으로 한 임플란트 가이드 시스템에 대한 임상가의 만족도 분석)

  • Hong, Min-ho;Jin, Ming-Xu;Lee, Du-Hyeong;Lee, Kyu-Bok
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.31 no.3
    • /
    • pp.178-185
    • /
    • 2015
  • Purpose: The purpose of this study was to conduct a comparative assessment on the satisfaction level for the two interfaces of surgical guide system (SimPlant and R2GATE), the design and convenience of manufactured surgical guides and the importance of using the surgical guides thereof by means of survey. Materials and Methods: Hereupon, they simulated the implant surgical process by mounting the two manufactured systems of surgical guide on a dental mold, respectively. The study subjects were instructed to complete the questionnaire as to the satisfaction level upon completion of the simulated surgery. This study summarized the data of each question after collecting the completed questionnaires. Then, this study analyzed the summarized data by utilizing statistical program SPSS 20.0 (IBM). Results: R2GATE had a higher value of the satisfaction level on the design and convenience of manufactures surgical guides. R2GATE group ($7.33{\pm}1.26$) was found to have a higher value in terms of the overall satisfaction level compared to SimPlant group ($6.67{\pm}1.26$) (${\alpha}$ = 0.05). Conclusion: The user satisfaction level on the surgical guide manufactured for R2GATE system was to such an extent as it can be widely used in clinical environment. Moreover, the surgical guide manufactured as R2GATE system can guide both the length and direction of a drill simultaneously. As a result, it is highly recommended for those beginners who do not have a lot of experience in implant placement.

Chloride Extraction and Modified Structural Behavior of Concrete under Electrochemical Treatment (전기방식에 따른 콘크리트 중의 탈염효과 및 구조거동)

  • Ann, Ki-Yong;Kim, Ki-Beom;Yang, Hee-Jun
    • Journal of the Korea Concrete Institute
    • /
    • v.29 no.1
    • /
    • pp.109-116
    • /
    • 2017
  • The present study concerns quantitative assessment of chloride extraction, repassivation and structural behavior of concrete. Concrete specimen ($160{\times}160{\times}1000mm$) was fabricated with 3 steel bar located in the middle with 20 mm of the cover depth, containing 5.0% of chloride to accelerate corrosion process, then to be subjected to electrochemical treatment. The current density accounted for $750mA/m^2$ at 2, 4 and 8 weeks. As a result, it was found that an increase in the duration of the treatment resulted in an increase in the chloride extraction, accounting for 64.7-83.7% for the specimen at 8 weeks treatment. It implies that a portion of bound chlorides would turn free to be removed, considering the binding capacity of cement about 50-60% to total ones. Even after the treatment, the corrosion was still active; the corrosion rate was $6.5mA/m^2$ and 330 mV vs. SCE in the potential. For structural behavior, the maximum load was increased by corrosion on the steel bars, which was subsequently lowered by the treatment, but still higher than for control.

Comparison of Exercise Pulmonary Function Test Using by Treadmill and Bicycle Ergometer in Patients with Respiratory Diseases (호흡기 질환 환자에서 자전거 타기와 답차를 이용한 운동 부하 폐기능 검사의 비교)

  • Park, Ji-Hyun;Lee, Heung-Bum;Lee, Yong-Chul;Rhee, Yang-Kuen
    • Tuberculosis and Respiratory Diseases
    • /
    • v.46 no.3
    • /
    • pp.386-393
    • /
    • 1999
  • Objective : Cardiopulmonary exercise testing in patients with heart and lung problems is used to assess functional capacity, evaluate responses to medical treatment, plan for exercise therapy, assess progression of disease process, and determine prognosis. Particularly in the patients with lung cancer, the exercise pulmonary function test gives significant physiologic assessment of the lung resection candidate. Common exercise modalities are running and cycling. Until now, the comparison of two tests mainly has been done in normal person and patients with cardiac diseases. This study is designed to compare the treadmill and bicycle exercise pulmonary function test in patients with respiratory diseases. Methods : Twenty one patients underwent a progressively incremental exercise test to the symptom-limited stage with the treadmill (Vmax29 Sensor Medics, USA) and the bicycle(model No. 2,900 Sensor Medics, USA) with 7 days apart between the two tests. Measurements were made of the metabolic, cardiorespiratory parameters, blood gases, and symptoms. Results : The results of the treadmill exercise showed significant elevation in the $VO_2$max, VEmax, and anaerobic threshold compared to those of bicycle exercise. In contrast, the results of the breathing and heart rate reserve showed the reverse. Conclusion : These results suggest that the type of exercise should be taken into consideration when interpreting exercise test in patients with respiratory diseases.

  • PDF

A Study on Surveying and Improving Management of Protected Areas in Korea (우리나라 보호지역 관리 실태와 개선방안)

  • Cho, Yong-Hyeon;Lee, Yong-Kwahng
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.38 no.1
    • /
    • pp.64-73
    • /
    • 2010
  • This research intends to suggest the ways to improve protected area management in Korea. To this end, the current protected areas appointed in the nation and their management has been examined, and the problems of management have been identified by means of a field research of protected areas and a survey. In addition, a scheme for an integrated management system has been suggested for management improvement, and a management plan guide, as well as after-evaluation guide, has been suggested. The outcome of the research is as follows. First, the protected area management plan is needed since the protected area in our nation is not managed in a proper way after being appointed as such. Second, when making a management plan, a management organization should make a management plan that can attract voluntary participation from stake-holders by means of efficient communications with them. Third, to maintain the management plan in a consistent and systematic way, related policy, law, and institutions should be (re)formulated. Fourth, an organization responsible only for management of protected areas should be established in consideration of management inefficiency due to the overlapped appointment of managing the protected area. Fifth, the management plan guide and after-evaluation guide can be used for effective protected area management. The results of this study are expected to be helpful for creating a management improvement scheme to address the problems related to the protected areas in our nation. But, it is required to review the guides for the management plan and after-evaluation, and consistent and systemic support from the government in such areas as legislation and policy are also in great need.

Development of an Measuring System for Pulse Wave Corresponding to Different Radial Artery Diameters Caused by Indentation (요골동맥 직경 변화에 따른 맥파 측정 시스템 개발)

  • Lee, Jeon;Woo, Young-Jae;Jeon, Young-Ju;Lee, Yu-Jung;Kim, Jong-Yeol
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.57 no.12
    • /
    • pp.2351-2357
    • /
    • 2008
  • Noninvasive radial artery pulse wave has been widely used not only for the pulse wave analysis(PWA) itself but also for assessment of arterial stiffness with estimated aortic pulse wave from peripheral pulse wave. However, it has been found that the deformation of pulse shape can be caused readily by changing measuring position, indentation pressure, and so on. So, in this study, we have developed a system which can measure radial pulse wave and skin displacement simultaneously while the indentation body goes down to occlude subject's radial artery. This system can be divided into a measuring apparatus part, an indentation control hardware part, a data acquisition part and a control and computation part. And, the measuring apparatus consists of an arm-rest, a step motor, an indentation body, a laser displacement sensor(LK-G30, Keyence Co.) and pulse wave sensor. Under load-free condition and radial artery loaded condition, the evaluation of developed system has been performed. From these results, we can conclude: 1) The developed system can control the indentation body quantitatively and the adopted laser displacement sensor shows linear output characteristic even with skin as a reflector. 2) This system can measure the pulse wave and the displacement of indentation body, that is, skin displacement simultaneously at each specific level of indentation body. 3) This system can provide the number of motor steps used to get down the indentation body, the measured skin displacement, the calculated indentation pressure, the calculated pulse pressure and the pulse waveform as well as the information generated by combining these with each others. 4) This system can reveal the relationship between the morphological changes of pulse wave and the estimated displacement of radial artery wall by indentation. Consequently, the developed system can furnish more abundant information on radial artery than previous diagnosis systems based on tonometric measurement. In further study, we expect to setup the standard measuring process and to concrete the algorithm for the estimation of radial artery's diameter and of displacement of radial artery's wall. Furthermore, with well designed clinical studies, we hope to turn out the usefulness of developed system in the field of cardiovascular system evaluation.

Assessment of the Effectiveness of Unfair Trading Prevention Acts in Construction Industry (건설공사 불공정거래 방지제도 실효성 평가 및 개선방안)

  • Kim, Sung-Il;Cho, Jung-Hee;Chang, Chul-Ki
    • Korean Journal of Construction Engineering and Management
    • /
    • v.19 no.1
    • /
    • pp.65-73
    • /
    • 2018
  • Since unfair trading practices between participants in construction project are common, the government has enforced several policies and systems to prevent or minimize the unfair trading practices in construction industry. However, not much attention has been paid to figure out which policies or acts are working or not. This paper analyzed the effectiveness of the policies and acts which are being implemented to prevent unfair trading practices and provided several suggestions to improve the performance of those acts. Survey was conducted to industry experts to collect data regarding their perceptions on those policies and acts. Then the effectiveness of the policies and acts were analyzed in terms of their importance and performance through IPA (Importance-Performance Analysis) based on the survey result. It was found through IPA that execution related acts such as investigation, exposure, and punishment for unfair trading practice have shown low effectiveness in entire construction process and dispute arbitration and mediation related center operated by authority showed low performance too. To improve the effectiveness of those acts, dispute arbitration system improvement, investigation & reporting system consolidation and enhancement practical binding force of punishment and penalty were suggested. Most of all, rules and culture for fair trading should become more established in construction industry by preventing conflict among participants through active communication.

Analysis of Potential Greenhouse Gas Mitigation in Pohang Steel Industrial Complex (포항철강산업단지의 온실가스 잠재 감축량 분석)

  • Lee, Gwang Goo
    • Clean Technology
    • /
    • v.20 no.4
    • /
    • pp.439-448
    • /
    • 2014
  • The potential mitigation of greenhouse gas (GHG) is studied in the Pohang steel industrial complex (PHSIC). The total GHG emission in 2010 is estimated to be in the range from 4,174,000 to 4,574,000 $tCO_2-eq$ in PHSIC. To meet the target proposed by the government, it is needed to reduce 552,000 $tCO_2-eq$ at minium by 2020. To estimate the potential amount of GHG reduction, the technologies used in the voluntary carbon reduction projects are applied to 51 companies which are subject to GHG target management. From the viewpoint of technological availability and payback period, the fuel conversion and waste heat recovery have an advantage in the short term with a possibility to reduce 160,000 $tCO_2-eq$. In the mid term, the thermal technologies in steel and iron industry have the potential to cut 229,000 $tCO_2-eq$, while the electrical technologies have the potential of 125,000 $tCO_2-eq$ reduction. The gap between the target GHG mitigation and potential reduction using the short and mid term technologies is about 38,000 $tCO_2-eq$, which should be compensated by the fundamental process innovation and the implementation of the most cutting-edge technologies including renewable energy.

The Effects of Hospital Accreditation Program to the Organizational Culture, Job Satisfaction, Financial Performances and Patient Safety at Geriatric Hospital : About Busan Metrocity (의료기관 인증제도가 요양병원의 조직문화, 직무만족, 경영성과 및 환자안전에 미치는 영향 -부산지역을 중심으로-)

  • Shin, Moon-Ju
    • Journal of Digital Convergence
    • /
    • v.12 no.10
    • /
    • pp.455-466
    • /
    • 2014
  • This study has been implemented to improve the quality in geriatric hospital through the Hospital Accreditation. So research a change in the perception and attitude of the Patient Safety, Organizational Culture, Job Satisfaction, Financial Performance of hospital staff after the Hospital Accreditation. For this, a survay was conducted from April 1 to July 20, 2014 to targeting staffs of eight geriatric hospital in the Busan city. Thus, a total of 283 questionnaires were used in the study. Firstly, It was found that change in the perception and attitude of the Patient Safety, Organizational Culture, Job Satisfaction, Financial Performance of hospital staff after the the Hospital Accreditation. Secondly, It was found that a statistical correlation among variables such as Patient Safety, Organizational Culture, Job Satisfaction, Financial Performance. Thirdly, Organizational Culture, Job Satisfaction, Financial Performance had a positive effect on Patient Safety. Therefore, we should develop the Hospital Accreditation program with the internal assessment to implement health care quality and patient safety to ensure a complete job satisfaction of hospital staffs in the Hospital Accreditation program further improve the evaluation process of hospital care.