• Title/Summary/Keyword: Pressures

검색결과 3,769건 처리시간 0.044초

전기가열방식 스크러버의 NF3 제거 효율 (The progress in NF3 destruction efficiencies of electrically heated scrubbers)

  • 문동민;이진복;이지연;김동현;이석현;이명규;김진석
    • 분석과학
    • /
    • 제19권6호
    • /
    • pp.535-543
    • /
    • 2006
  • 현재 반도체 및 LCD(Liquid Crystal Display) 제조 공정에 널리 사용하는 $NF_3$는 국제적으로 대기중 배출량에 대한 규제를 실시 중인 온실가스 중의 하나다. 온실가스의 배출량 감축을 위하여 국내 대상 산업체들은 $NF_3$ 배출량의 감소에 지속적으로 노력을 해 오고 있다. 본 연구는 LCD를 제조하는 국내 3사에 설치된 $NF_3$ 처리용 전기가열방식 스크러버(scrubber)의 제거효율(DRE, Destruction and Removal Efficiency)과 process chamber에서의 $NF_3$ 사용 비율(use rate in process)을 측정하였다. 스크러버의 효율을 정확하게 측정하기 위하여, 비활성 기체인 He을 일정 유량으로 주입시켜주는 방법으로 시료를 채취하고, 정밀 가스질량분석기(Gas-MS)를 이용하여 시료 중 화학종들의 분압을 측정하였다. 세 회사에 설치되어 있는 스크러버의 효율을 측정한 결과, 2004년 이전에 설치한 스크러버의와 그 이후 개선한 스크러버의 DRE는 각각 52%와 95% 이상임을 확인하였다. 또한 Process chamber의 $NF_3$ 사용 효율은 1세대 및 2세대 공정라인에 설치한 RFSC(Radio Frequency Source Chamber)의 경우 75% 보다 낮지만, 3세대 이상 라인에 설치한 RPSC(Remote Plasma Source Chamber)의 경우는 95% 이상으로 측정이 되었다. 반도체 및 디스플레이 공정에 개선된 스크러버와 RPSC식 process chamber를 사용할 경우 $NF_3$ 배출량을 99.95% 이상 줄일 수 있을 것으로 예상된다. 따라서 $NF_3$에 대한 국내 3사의 온실가스 감축 목표가 성공적으로 이루어 질 것으로 예상된다.

폭발하중을 받는 콘크리트 구조물의 실험적 거동분석 : (II) 초고강도 콘크리트 및 RPC 슬래브의 실험결과 (Behavior Analysis of Concrete Structure under Blast Loading : (II) Blast Loading Response of Ultra High Strength Concrete and Reactive Powder Concrete Slabs)

  • 이나현;김성배;김장호;조윤구
    • 대한토목학회논문집
    • /
    • 제29권5A호
    • /
    • pp.565-575
    • /
    • 2009
  • 최근, 테러 및 전쟁과 관련된 폭발사고가 빈번히 발생하고 있으며, 특히 도심지에서는 이러한 폭발사고로 인해 인명피해 뿐 아니라 주요 시설물에도 큰 손상이 가해져 제2차, 3차의 피해가 발생하게 된다. 폭발사고에 대하여 인명 및 시설물을 안전하게 보호하기 위해서는 기본적으로 구조물에 가해지는 폭발하중 효과에 대한 이해가 필요하다. 폭발하중은 매우 빠른 시간 내에 콘크리트 구조물에 큰 압력으로 작용하는 하중이므로 변형률 속도와 구조물의 국부적인 손상을 고려하여 동적응답을 평가해야 한다. 일반적으로, 콘크리트는 다른 건설재료에 비해 상대적으로 높은 폭발저항성을 가진 재료이지만, 일반강도 콘크리트는 충격 및 폭발하중에 대하여 충분한 저항성능을 가지지 않는다. 그러므로 방호설계에서는 고에너지 흡수력과 높은 파괴저항성을 지니는 새로운 재료의 개발이 필요하다. 본 논문에서는 최근 활발하게 연구 중인 초고강도 콘크리트(UHSC)와 Reactive Powder Concrete(RPC)에 대한 방폭성능을 평가하고자 한다. UHSC와 RPC는 강도 및 성능향상, 부재의 치수 및 중량 감소, 내진저항성 향상과 같은 장점들로 인해 초고층건물 및 초장대교량에서 사용되어지고 있다. 또한 UHSC와 RPC는 9.11테러와 같은 테러 및 충격하중에 의한 사회주요시설물의 방호설계에 적용할 수 있다. 그러므로 본 연구에서는 폭발하중에 대한 UHSC 및 RPC 구조물의 거동을 파악하기 위하여 $1.0m{\times}1.0m{\times}150mm$의 슬래브 구조물 시편을 제작하여 폭발실험을 수행하였으며, 폭발파의 특성 뿐만 아니라 최대 및 잔류 변위와 철근과 콘크리트 표면에서 변형률을 측정하여 구조물의 거동을 분석하였다. 또한 손상 및 파괴모드를 각 시편별로 측정하였다. 본 실험을 통해 UHSC 및 RPC가 일반강도콘크리트에 비해 폭발저항성이 높은 것으로 분석되었다.

한국 동해연안의 종관주기 해수면 변동 특성과 발생원인 (Sea Level Variability at a Synoptic Band along the East Coast of Korea and its Causal Mechanism)

  • 정성윤;윤재열;박태욱;임세한;오임상
    • 한국해양학회지:바다
    • /
    • 제13권2호
    • /
    • pp.89-105
    • /
    • 2008
  • 한국 동해 연안에서의 종관주기 해수면 변동 특성과 그 원인을 규명하기 위해 동해 연안 4개 정점에 대하여 1999-2005년까지 7년 동안의 해수면과 대기압 자료를 분석하였다. 해수면의 wavelet 스펙트럼 분석 결과 모든 연도에 걸쳐 약 3-17일에 이르는 종관주기에서 95% 신뢰수준의 유의한 해수면 변동성이 식별되었고, 그러한 변동성은 봄에서 초여름에 이르는 기간에 비교적 강하게 나타났다. 이러한 변동성의 원인을 찾기 위해 해수면과 대기압 간 교차 스펙트럼 분석을 한 결과, 종관주기에서 높은 상관성을 보여 종관주기 해수면 변동의 생성에 있어 역기압 효과(inverted barometric effect)가 중요하게 작용함을 알 수 있었다. 또한, 동해 연안의 인접 해수면 관측소간 교차 스펙트럼 분석결과 북에서 남으로 위상지연이 생기는 경우와 그렇지 않은 경우로 나뉘었다. 즉 1999, 2003, 2005년은 인접 해수면 관측소간 남쪽으로 점진적인 위상지연이 발생하였고 2000-2002, 2004년은 점진적인 위상지연이 발생하지 않았다. 위상지연이 발생하는 경우의 위상속도는 약 12-15m/s로 연안 켈빈파의 위상속도와 유사한 형태로 볼 수 있다. 이러한 점진적인 위상지연의 발생원인은 봄에서 초여름 기간에 동아시아 대륙에서 발달한 저기압이 동해 북부해역을 통과하여 동진할 때 발생하는 것으로 사료된다. 인접 관측소간 점진적인 위상지연이 발생하지 않은 경우는 동아시아 대륙에서 발달한 저기압이 종관주기를 가지고 동해 연안을 중부나 남부 구역을 통해 지날 때 나타남을 알 수 있었다. 이처럼 우리나라 동해안에서 점진적인 위상지연이 발생하지 않는 경우에는 일본 남서해안에서 북동쪽으로 연안을 따라 $5{\sim}8\;m/s$의 전파속도를 가지고 점진적인 위상지연이 발생함을 알 수 있었다.

Elevated On-Treatment Diastolic Blood Pressure and Cardiovascular Outcomes in the Presence of Achieved Systolic Blood Pressure Targets

  • Dae-Hee Kim;In-Jeong Cho;Woohyeun Kim;Chan Joo Lee;Hyeon-Chang Kim;Jeong-Hun Shin;Si-Hyuck Kang;Mi-Hyang Jung;Chang Hee Kwon;Ju-Hee Lee;Hack Lyoung Kim;Hyue Mee Kim;Iksung Cho;Dae Ryong Kang;Hae-Young Lee;Wook-Jin Chung;Kwang Il Kim;Eun Joo Cho;Il-Suk Sohn;Sungha Park;Jinho Shin;Sung Kee Ryu;Seok-Min Kang;Wook Bum Pyun;Myeong-Chan Cho;Ju Han Kim;Jun Hyeok Lee;Sang-Hyun Ihm;Ki-Chul Sung
    • Korean Circulation Journal
    • /
    • 제52권6호
    • /
    • pp.460-474
    • /
    • 2022
  • Background and Objectives: This study aimed to investigate the association between cardiovascular events and 2 different levels of elevated on-treatment diastolic blood pressures (DBP) in the presence of achieved systolic blood pressure targets (SBP). Methods: A nation-wide population-based cohort study comprised 237,592 patients with hypertension treated. The primary endpoint was a composite of cardiovascular death, myocardial infarction, and stroke. Elevated DBP was defined according to the Seventh Report of Joint National Committee (JNC7; SBP <140 mmHg, DBP ≥90 mmHg) or to the 2017 American College of Cardiology/American Heart Association (ACC/AHA) definitions (SBP <130 mmHg, DBP ≥80 mmHg). Results: During a median follow-up of 9 years, elevated on-treatment DBP by the JNC7 definition was associated with an increased risk of the occurrence of primary endpoint compared with achieved both SBP and DBP (adjusted hazard ratio [aHR], 1.14; 95% confidence interval [CI], 1.05-1.24) but not in those by the 2017 ACC/AHA definition. Elevated on-treatment DBP by the JNC7 definition was associated with a higher risk of cardiovascular mortality (aHR, 1.42; 95% CI, 1.18-1.70) and stroke (aHR, 1.19; 95% CI, 1.08-1.30). Elevated on-treatment DBP by the 2017 ACC/AHA definition was only associated with stroke (aHR, 1.10; 95% CI, 1.04-1.16). Similar results were seen in the propensity-score-matched cohort. Conclusion: Elevated on-treatment DBP by the JNC7 definition was associated a high risk of major cardiovascular events, while elevated DBP by the 2017 ACC/AHA definition was only associated with a higher risk of stroke. The result of study can provide evidence of DBP targets in subjects who achieved SBP targets.

단일 박동형 생명구조장치의 인공폐 적용 -실험연구- (Application of a Single-pulsatile Extracorporeal Life Support System for Extracorporeal Membrane Oxygenation -An experimental study -)

  • 김태식;선경;이규백;박성영;황재준;손호성;김광택;김형묵
    • Journal of Chest Surgery
    • /
    • 제37권3호
    • /
    • pp.201-209
    • /
    • 2004
  • 생명구조장치(ECLS)는 호흡부전 및 심부전에 적용하는 장치로 세계적으로 많은 연구개발과 임상시도가 계속되고 있다. 현재까지 생명구조장치의 혈류펌프로는 비박동형 구동장치가 표준으로 사용되고 있으며, 박동형 구동장치는 생리적인 측면에서 유리하지만 급격한 회로압 상승과 그에 따른 혈구손상에 대한 우려가 있고 특히 막형산화기를 사용하는 인공폐 회로에서 기피되어 왔다. 본 연구는 인공폐 실험모델에서 단일 박동형 구동펌프와 막형 산화기 사이에 압력완충장치를 설치함으로써 언급한 부작용을 최소화시키면서 생리적인 박동혈류를 유도할 수 있을 것이라는 가능성을 검증하였다. 실험대상은 올레익산으로 급성 호흡부전증이 유발된 잡견(N=16)을 사용하였다. 실험군은 사용된 구동펌프의 종류와 압력완충장치의 유무에 따라 3개 군으로 분류하였다. 제1군(n=6)은 대조군으로 원심펌프를 이용하였고, 제2군(n=4)은 단일 박동형 구동펌프를 사용하였으며, 제3군(n=6)은 단일 박동형 구동펌프에 압력완충장치를 설치하였다. 실험모델은 흉강 절개 후 우심방-대동맥을 우회시키는 부분 체외순환 형태로, 1.8~2 L/min의 펌프박출량에서 2시간을 구동하였다. 관찰지표는 주로 혈역학 변화, 회로압, 혈액검사 및 혈구세포에 미치는 영향 등에 한정하였다. 맥동압(pulse pressure)은 박동형 구동펌프를 이용한 2군(47$\pm$10 mmHg)과 3군(41$\pm$9 mmHg)에서 비박동형 원심펌프를 이용한 1군(17$\pm$7 mmHg)에 비해 유의하게 높았다(p<0.001). 막형산화기에 걸리는 회로압은 1 군의 경우 222$\pm$8mmHg, 2군의 경우 739 $\pm$ 35 mmHg, 3군의 경우 470$\pm$ 17 mmHg였다(p<0.001). 순환 2시간째의 동맥혈 산소분압은 1군에 비해 박동혈류를 사용하는 2군과 3군에서 현저하게 높았다(77$\pm$41, 96$\pm$48, 97$\pm$25 mmHg; p<0.05). 혈구손상지표인 혈장 유리 헤모글로빈치는 1군에서 가장 낮았고, 2군에서 가장 높았으며, 3군에서 유의하게 감소하였다(55.7$\pm$43.3, 162.8$\pm$113.6, 82.5$\pm$25.1 mg%; p<0.05). 기타 혈액검사치는 특별한 차이가 없었다. 이상의 결과에서 단일 박동형 구동펌프는 비박동형 원심펌프에 비해 막형산화기의 산소교환에 유리한 반면, 회로압과 혈구세포 손상 측면에서 불리하다는 것을 알 수 있었다. 그러나 단일 박동형 구동펌프와 막형 산화기 사이에 압력완충장치를 설치하는 경우, 회로압 상승과 혈구세포손상을 유의하게 감소시킬 수 있었다.

실리카 지지 루테늄-니켈 합금에 있어서 일산화탄소의 흡착에 관한 IR 연구 (IR Study on the Adsorption of Carbon Monoxide on Silica Supported Ruthenium-Nickel Alloy)

  • 박상윤;윤동욱
    • 공업화학
    • /
    • 제17권4호
    • /
    • pp.349-356
    • /
    • 2006
  • 실리카($SiO_{2}$)지지 루테늄-니켈(Ru/Ni) 합금에 있어서 Ru/Ni 몰함량비와 일산화탄소(CO)의 분압의 변화에 따른 CO의 흡착 및 탈착거동에 대한 연구를 FT-IR을 이용하여 수행하였다. $Ru-SiO_{2}$ 시료에 CO를 흡착시켰을 때 $2080.0cm^{-1}$, $2021.0{\sim}2030.7cm^{-1}$, $1778.9{\sim}1799.3cm^{-1}$, $1623.8cm^{-1}$의 위치에 네 흡수띠가 관찰되었고 진공탈착시 $2138.7cm^{-1}$, $2069.3cm^{-1}$, $1988.3{\sim}2030.7cm^{-1}$의 위치에 세 흡수띠가 관찰되었다. $Ni-SiO_2$ 시료에 CO를 흡착시켰을 때 $2057.7cm^{-1}$, $2019.1{\sim}2040.3cm^{-1}$, $1862.9{\sim}1868.7cm^{-1}$, $1625.7cm^{-1}$의 위치에 네 흡수띠가 관찰되었고, 진공탈착 시켰을 때 $2009.5{\sim}2040.3cm^{-1}$, $1828.4{\sim}1868.7cm^{-1}$의 위치에 두 흡수띠가 관찰되었다. $Ru-SiO_{2}$ 시료와 $Ni-SiO_{2}$ 시료에서 관찰된 IR 스펙트럼은 이전의 보고와 근사적으로 일치한다. Ru/Ni(9/1, 8/2, 7/3, 6/4, 5/5; 몰 함량비)-$SiO_{2}$ 시료에서는 CO를 흡착시켰을 때 $2001.8{\sim}2057.7cm^{-1}$, $1812.8{\sim}1926.5cm^{-1}$, $1623.8{\sim}1625.7cm^{-1}$의 위치에 세 흡수띠가 관찰되었으며, 진공탈착시 $2140.6cm^{-1}$, $2073.1cm^{-1}$, $1969.0{\sim}2057.7cm^{-1}$의 위치에 세 흡수띠가 관찰되었다. Ru/Ni-$SiO_{2}$ 시료에서 CO를 흡착시켰을 때 Ru/Ni의 몰 함량비가 9/1 경우 관찰된 IR 스펙트럼의 모양이 $Ru-SiO_{2}$ 시료에서 CO를 흡착시켰을 때의 모양과 거의 같음이 관찰되었고 Ru/Ni의 몰 함량비가 8/2 보다 작아지면 관찰된 IR 스펙트럼의 모양이 $Ni-SiO_{2}$ 시료에서 CO를 흡착시켰을 때의 모양과 거의 같다. 따라서 Ru/Ni-$SiO_{2}$ 시료 표면에 존재하는 합금 뭉치의 표면에 몰 함량비보다 니켈이 많이 존재한다는 추정이 가능하다. $SiO_{2}$ 지지 Ru/Ni 시료에서 조성의 변화에 따른 CO 흡수띠 파수의 이동을 $SiO_{2}$ 표면에 분산되어 있는 합금뭉치 표면의 조성, 합금뭉치 표면의 조성에 따른 Ru과 Ni 원자의 원자 크기의 차이로 인한 합금뭉치 표면에서 스트레인의 변화, 합금뭉치 표면에서 결합에너지와 전자밀도분포 변화, 합금뭉치 표면에서 표면구조의 변화와 관련이 있음은 분명하다. Ru/Ni 합금결정 표면에서 CO 흡착에 대한 LEED 및 Auger를 이용한 연구, 실리카겔과 Ru/Ni 합금 뭉치와의 상호작용, Ru/Ni 합금 표면에서 CO 흡착에 대한 MO 계산 등의 연구가 진전되어 진다면 이러한 복잡계에 대한 규명에 도움이 될 것으로 보인다.

임플랜트 식립부위 형성시 골조직의 온도변화에 관한 연구 (A STUDY ON THE TEMPERATURE CHANGES OF BONE TISSUES DURING IMPLANT SITE PREPARATION)

  • 김평일;김영수;장경수;김창회
    • 대한치과보철학회지
    • /
    • 제40권1호
    • /
    • pp.1-17
    • /
    • 2002
  • The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

참여자관점에서 공급사슬관리 시스템의 성공에 영향을 미치는 요인에 관한 실증연구 (An Empirical Study on the Determinants of Supply Chain Management Systems Success from Vendor's Perspective)

  • 강성배;문태수;정윤
    • Asia pacific journal of information systems
    • /
    • 제20권3호
    • /
    • pp.139-166
    • /
    • 2010
  • The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.

일부 농촌과 도시의 건강선별조사 자료로 본 백혈구수와 고혈압과의 관계 (Leukocyte count and hypertension in the health screening data of some rural and urban residents)

  • 이충원;윤능기;이성관
    • Journal of Preventive Medicine and Public Health
    • /
    • 제24권3호
    • /
    • pp.363-372
    • /
    • 1991
  • 백혈구수와 고혈압과의 관계를 알아보기 위해 1985년에 일부 농촌 거주자와 1986년에 일부 도시 거주자를 대상으로 혈액학적인 검사와 장기별로 기능검사를 통해서 건강선별조사를 했던 자료를 이용했다. 농촌거주자는 1985년에 경상북도 경산군에서 남자 206명, 여자 203명을 마을, 통, 반을 기준으로 다단계 집락추출법으로 추출했다. 도시 거주 대상자는 1985년 12월에 대구시에 거주하고 있는 20세 이상의 주민의 성별, 연령별 구성비율에 부합되게 농촌과 같은 표본추출방법으로 600명을 선정했으나 600명중 384명만이 본 조사에 응해주어서 나머지 인원은 피보험대상자들의 정기 신체검사를 위해 대학병원 건강관리과에 내원한 사람들 중에서 성, 연령을 짝지어서 추출했다. 이들 자료에서 백혈구수 측정이 빠진 사람, 고혈압력을 포함한 질병 유소견자와 검사상 극도의 비정상적인 수치를 보이는 자들을 농촌 거주자에서 36명 (8.8%), 도시 거주자에서 29명 (4.8%)을 제외시켜서 최종분석에 이용된 자는 도시가 571명, 농촌이 373명이었다. 백혈구수 측정은 ELT-8 Laser shadow method 를 이용했으며 단위는 $cells/mm^3$ 였다. 혈압 측정은 Aneroid 혈압계를 사용해서 표준화한 후 측정했다. 고혈압자의 정의는 수축기혈압 140 mmHg/확장기혈압이 90 mmHg 이상인 자로 했다. 농촌과 도시를 합한 총대상자에대해 고혈압자와 정상 혈압자간의 백혈구수의 평균을 비교하면 정상 혈압자에서 $6490.61{\pm}1941.32$, 고혈압에서 $6965.93{\pm}1997.01$로서 고혈압자에서 백혈구수의 평균이 통계적으로 유의하게 더 높았으며 (P=0.00), 농촌에서 동일한 방향의 유의한 차이를 보였다 (P=0.03). 그 외의 거주지와 성별로 층화한 각 층에서는 유의한 평균차이를 보이는 결과는 없었다. 총대상자에서 백혈구수 1/5분위수를 기준으로 했을 때 2/5분위수의 비차비가 0.99 (95% confidence interval, CI 0.62-1.59), 3/5분위수가 1.41 (95% CI 0.90-2.21), 4/5분위수가 1.76(95% CI 1.14-2.72), 5/5분위수가 1.80 (95% CI 1.15-2.82)로서 백혈구수가 증가 함에따라 고혈압의 유병율이 일정하게 상승하는 것을 알 수 있었으며 경향분석에서도 유의한 경향($X^2_{trend}=5.53,\;df=1,\;P<0.05$)을 나타내었다. 나머지 층에서는 유의한 비차비도 없었으며 유의한 경향 역시 보이지 않았다. 그러나 거주지와 성별로 층화한 각 층에서 연령, 흡연과 음주량을 다중지수회귀분석으로 통제를 했을 때 단일분석시 통계적인 유의성을 보였던 전체 대상자의 비차비는 통계적으로 유의하지 않게 되었고 그 크기 역시 작아지고 불안정해졌다. 전체적으로 비차비의 크기가 조금씩 줄었으며 경향분석에서도 유의한 경향을 보인 층은 없었다. 이러한 사실은 백혈구수와 고혈압과의 가설을 처음으로 제시했던 Friedman등의 연구가 고혈압의 예측변수를 찾기위해 800여개의 변수와 고혈압발생과의 관계를 보는 과정에서 우연히 발견된 통계적인 1종오차의 결과 일지도 모른다는 것을 시사해주는 결과이다.

  • PDF

상표자산과 구매의도와의 관계에 관한 국제비교연구 - 아시아와 유럽의 의류시장을 중심으로 - (Brand Equity and Purchase Intention in Fashion Products: A Cross-Cultural Study in Asia and Europe)

  • 김경훈;고은주;;;이동해;정홍섭;전병주;문학일
    • 마케팅과학연구
    • /
    • 제18권4호
    • /
    • pp.245-276
    • /
    • 2008
  • 본 연구는 상표자산의 구성요소에 대한 선행요인을 분석하고 이를 토대로 하여 상표자산 구성요소와 상표자산 영향요인간의 관계 그리고 상표자산 구성요소와 구매의도간의 관계를 규명하고 한국과 영국을 중심으로 비교하여 상표자산관리 방안을 도출해보고자 하였다. 연구결과, 정보탐색은 제품지식에 정(+)의 영향을 미치며, 상표태도와 상표지식은 상표 충성도와 상표 가치에 정(+)의 영향을 미치는 것으로 나타났다. 그리고 상표충성도와 상표가치는 구매의도에 정(+)의 영향을 미치는 것으로 나타났다. 정보원천의 경우, 한국에서는 제품지식에 정(+)의 영향을 미치고 있는 반면, 영국에서는 영향을 미치지 않는 것으로 나타났다.

  • PDF