• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.262-267
• /
• 2005

During several method of improvement efficient, We analyzed Doherty Amplifier That used by simple circuit and 180w PEP LDMOS to analyze improvement of efficient and linearity. We for testing performance of Doherty Amplifier compared with Balanced Class AB, the experimental results show when Peaking Amp $V_gs.P$=1.53V, the efficiency is increased at Maximum 11.6$\%$. After finding optimum bias point of linearity improvement by manual tuning gate bias, when WCDMA 4FA $V_gs.P$=3.68V IMSR could be increased maximum 3.34dB. especially, when we match bias point of Peaking amp at 1.53V, we could get a excellent efficiency increase and have fUR under -3203c at output power 43dBm.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.51-52
• /
• 2013

본 논문에서는 박막형 태양전지 및 LCD 제조공정에서 증착 공정 후 챔버 내부에 쌓이는 Si(실리콘)을 화학적으로 세정하기 위한 F(불소) RADICAL을 공급하는 원격 고밀도 플라즈마를 발생시키기 위한 고출력 Generator에 대해 소개하고자 한다. 개발되어진 Generator는 입력 직류전원을 공유하여 7kW급 단일 Power Amp Module의 상호결합 및 전력분담에 대한 편차 극복을 위한 기술과 고조파 저감비가 우수한 대전력 필터를 구현하였고, 크기 및 부피의 축소를 위하여 필터의 Q Factor의 극대화 기술이 적용되어졌다. 개발된 400kHz 30kW Generator는 NF3 60리터의 대용량 Remote Plasma Source의 리액터를 구동시킬 수 있으며, 38kW급 DC Link, 7kW급 Power Amp module, LC 필터, Controller로 구성되어 진다. 개발된 장치는 실제 플라즈마 공정에서 시험 평가한 결과를 통해 검증할 수 있었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.883-892
• /
• 2009

We evaluated the degradation properties of various alkanolamine absorbents (MEA, AMP, DEA, and MDEA) having different chemical structures for $CO_2$ capture. The degradation of $CO_2$ absorbent in general was known to be caused by oxygen which is in flue gas and by heat source, respectively. To analyze the effect of $CO_2$ and $O_2$ on degree of degradation, we conducted a variety of experiments at $30^{\circ}C$ and $60^{\circ}C$ (oxidative degradation) and $130^{\circ}C$ and $150^{\circ}C$ (thermal degradation), respectively. DEA showed the worst property for oxidative degradation in the presence of oxygen among the alkanolamine absorbents. In the case of thermal degradation, the degradation of absorbent was occurred for most of absorbents at $150^{\circ}C$. Among these absorbents, MEA and DEA gave the worst results. As a result, AMP which is a primary amine and having a steric hindrance showed the best result through the degradation test. But, the degradation of absorbent proceeded easily in the case of DEA which is a secondary amine and having 2 OH groups in terminal position. Consequently, we have evaluated the degree of degradation of various absorbents having different chemical structures to give the basic data for the development of alkanolamine absorbent.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.118-121
• /
• 2003

Generally, the repeater in CDMA(Code Division Multiple Access) included HPA(HI-Power Amplifier) to amplifier communication signals. Also , HPA contained PD(Predistortor) to maintain the linearization of amplifier characteristics. A configuration component of PD have been used electricity nonlinear devices such that diode. But this diode takes many influences at the circumstance temperature. Consequently, it can't maintain output linearization, and drop the communication quality. The manufacturer set bias of the circuit to the manual at the first out of ware-house low But the Q-point changes according to the change of the high temperature or low temperature. Therefore, we designed a system to maintain the Q-point by FDM(Fuzzy Decision Maker) in this paper.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.6
• /
• pp.37-43
• /
• 1997

In this paper, an analog-domain powr-reduction technique for a low-voltage CMOS operational amplifier and its application to clock-based VLSI systems are proposed. The proposed technique cuts off the bias current of the op amp during a half cycle of the clock in the sleeping mode and resumes the curent supply sequentially during the remaining cycle of the clock in the normal operating mode. The proposed sequential sbiasing technique reduces about 50% of the op amp power and improves the circuit performance through high phase margin and stable settling behavior of the output voltage. The power-reduction technique is applied to a sample-and-hold amplifier which is one of the critical circuit blocks used in the front-end stage of analog and/or digital integrated systems. The SHA was simulated and analyzed in a 0.8.mu.m n-well double-poly double-metal CMOS technology.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.288-290
• /
• 2006

An efficiency improving method for Uninterruptible Power Supply System(UPS) was developed by using OP-AMP based application circuits such as voltage detection device, current detection device and static switch control device. The efficiency improving algorithm was made by mixing the operating concepts of On-Line type UPS with the operating concepts of Off-Line type UPS. The UPS' inverter does not work if the UPS' output load current is not higher than the low load operating current which is about 0-30(%) of the UPS' output load capacity. The low load operating current is adjustable within the half of the UPS' output load capacity. If the UPS' output load current is rising over than the low load operating current, the UPS' inverter starts working and the inverter output power feeds to the loads of UPS. If UPS' input power breaks out while UPS' inverter does not operate because the load current is low, the inverter starts working within 4(ms) with excessive output voltage which is ${\pm}$8(%) of normal UPS' output voltage. Like these. UPS can continuously feeds power to it's load device and reduce power consumptions.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1011-1014
• /
• 2003

We proposed a new two-stage operational amplifier that increases the slew rate by adding some simple circuitry to the conventional structure. The proposed circuit is simulated by HSPICE and the slew rate of the proposed circuit is improved more than 10 times than that of conventional one in slewing state without considerable increments in area and power consumption.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.873-876
• /
• 2005

This paper presents a new current transient test technique for wideband CMOS Op Amps. This technique monitors the transient power supply current and output responses of the CMOS Op Amp to automatically differentiate faulty and fault-free op amps. The wideband op amp is designed using 0.25${\mu}$m CMOS technology. We present detailed simulation results for a wideband op amp. We show that catastrophic faults in op amps can be detected and analyzed by monitoring power supply currents and output responses. This technique is inexpensive and simple.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.6 s.360
• /
• pp.50-59
• /
• 2007

[ $0.18-{\mu}m$ ] CMOS 1.2-V 2nd-order ${\Sigma}{\Delta}$ modulator with full-feedforward topology is designed. Using full-feedforward topology makes op-amp performance requirements much less stringent, therefore it has been adopted as a good candidate for low-voltage low-power applications throughout the world. Also, ${\Sigma}{\Delta}$ modulator is designed with top-down design approach, therefore various nonideal effects of op-amp are modeled in this paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.87-93
• /
• 2019

We discuss the design of a radiometer using a millimeterwave(Ka-band) seeker. We applied a total power radiometer, thus the radiometer is composed of a IF-drive amp, band-pass filter, detector and an Op-amp additionally. As a radiometer measure a radiated signal of an object which is noise-like, a radiometer is easily affected by the variance of system temperature. To mitigate an adverse effect, we propose a compensation method in a radiometer without brightmess temperature compensation circuits. Through some experiments such like a distinction a target and the background, we have verified that the designed radiometer system has distingushed a car from the ground completely.