Abstract
We evaluated the degradation properties of various alkanolamine absorbents (MEA, AMP, DEA, and MDEA) having different chemical structures for $CO_2$ capture. The degradation of $CO_2$ absorbent in general was known to be caused by oxygen which is in flue gas and by heat source, respectively. To analyze the effect of $CO_2$ and $O_2$ on degree of degradation, we conducted a variety of experiments at $30^{\circ}C$ and $60^{\circ}C$ (oxidative degradation) and $130^{\circ}C$ and $150^{\circ}C$ (thermal degradation), respectively. DEA showed the worst property for oxidative degradation in the presence of oxygen among the alkanolamine absorbents. In the case of thermal degradation, the degradation of absorbent was occurred for most of absorbents at $150^{\circ}C$. Among these absorbents, MEA and DEA gave the worst results. As a result, AMP which is a primary amine and having a steric hindrance showed the best result through the degradation test. But, the degradation of absorbent proceeded easily in the case of DEA which is a secondary amine and having 2 OH groups in terminal position. Consequently, we have evaluated the degree of degradation of various absorbents having different chemical structures to give the basic data for the development of alkanolamine absorbent.
본 논문에서는 대표적인 이산화탄소 흡수제인 알칸올아민계 흡수제(MEA, AMP, DEA, MDEA)를 사용하여 각 흡수제의 구조에 따른 열화특성을 평가하였다. 흡수제의 열화는 산화성열화(oxidative degradation)와 열적열화(thermal degradation)의 두 가지로 나누어 생각할 수 있다. 산화성열화 실험은 $30^{\circ}C$와 $60^{\circ}C$의 저온 실험장치에서 이산화탄소 ($CO_2$)와 산소($O_2$)에 대한 열화도를 평가하였으며 열적열화는 $130^{\circ}C$와 $150^{\circ}C$의 고온에서 이산화탄소에 대한 열화도를 평가하였다. 실험 결과, 흡수제의 산화성열화는 DEA의 열화가 가장 크게 나타났다. 또한, 흡수제의 열적열화는 $150^{\circ}C$에서 대부분의 흡수제에서 발생하였는데 그 중 MEA와 DEA의 열화가 가장 심하였다. 결론적으로 내열화성 측면에서 1차 아민이지만 3차 탄소에 결합되어 입체장애를 갖는 AMP가 가장 우수한 흡수제인 반면, 2차 아민이며 분자내 OH기를 2개 가지며 아민이 노출된 DEA가 열화도 측면에서 가장 좋지 못한 흡수제로 나타났다. 본 논문에서는 다양한 흡수제의 기본구조에 따른 열화 안정성을 평가하여 이산화탄소 흡수를 위한 알칸올아민 흡수제 개발의 기초 자료를 제시하고자 하였다.