• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.915-918
• /
• 2003

본 논문에서는 높은 슬루율을 가지고 전압편차 (offset)보상 기능을 가지면서도 전력소모가 적은 고계조 TFT-LCD 데이터 드라이버 구동용 단일이득 연산증폭기(unit gain op-amp)의 바이어스 회로 및 구동 방법을 제안하였다. 제안한 단일이득 연산증폭기는 일반적으로 사용되고 있는 전압편차 보상기능을 가진 단일이득 연산증폭기에 adaptive bias기능을 추가한 것으로써, 기존 구조에 비해 50%이상의 소비 전력 절감 효율을 보였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.165-168
• /
• 2002

본 논문에서는 밀리미터 웨이브 대역의 PBG(photonic band gap)를 적용한 고출력 증폭기를 설계하였다. 증폭기의 선형성과 효율을 개선하기 위하여 PBG를 증폭기의 2차 고조파를 제거하도록 설계하였다. 또한 기존의 PBG형태와 비슷한 성능을 가지면서도 출력 라인을 따라서 구현되는 PBG의 길이는 감소하도록 PBG를 변형하여 최적화 시켰다.

• Information and Communications Magazine
• /
• v.30 no.11
• /
• pp.60-67
• /
• 2013

본 원고에서는 무선 전력 전송용 송수신 칩의 구조 및 설계 이슈에 대해서 설명하고, 각 구성 블록들의 동작 원리를 살펴본다. 또한, 무선 전력 전송의 효율을 향상시키기 위한 시스템 구조 및 Rectifier, DC-DC Converter, LDO Regulator, Power Amp 등에 대해서 기본적인 동작 원리부터 최근 설계 동향에 대해서 다룬다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1578-1581
• /
• 2009

This work describes a power and area efficient switched-capacitor cyclic DAC for mobile display drivers. The proposed DAC can be simply implemented with one opamp two capacitors and several switches. Furthermore, the op-amp input referred offset is attenuated at the DAC output without additional offset cancellation circuitry. The operation of the cyclic DAC is verified through circuit level simulations.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.120-121
• /
• 2014

장거리 이송이 가능한 선형동기 전동기 구조를 제안하고, 수학적 모델링을 하였으며, PI제어기를 포함하는 제어알고리즘을 제안하여, 실험으로 그 결과를 확인하였다. 추진제어기의 출력은 Park's, Clake's Transformation을 이용하여 코일을 구동하는 전류 명령을 발생시켰으며 개별 코일을 독립적으로 구동하는 아날로그 전류제어기를 OP-Amp로 구현하였다. 실험결과는 속도 오차는 4 ~ 10% 이하의 결과를 얻었다.

• Clean Technology
• /
• v.22 no.2
• /
• pp.122-131
• /
• 2016

Caesium radioisotopes, ¹³⁴Cs and ¹³⁷Cs which come from the atmospheric nuclear tests and discharges from nuclear power plants, are very important to study artificial radioactivity. In this work, in order to lower the minimum detection activity (MDA) we investigated environmental radioactivity according to the Environment Measurement Laboratory procedure by ¹³⁷Cs and ¹³⁴Cs which is similar to chemical and environmental behaviors of ¹³⁷Cs. The environmental soils in high mountain areas near nuclear power plant were collected, and an Ammonium Molybdophosphate (AMP) precipitation method, which showed high selectivity toward Cs⁺ ions, was applied to chemically extract and concentrate Caesium radioisotopes. Radioactivity was estimated by a gamma-ray spectrometry. In gamma energy spectrum, with an increasing of ⁴⁰K radioactivity, it increased the MDA of ¹³⁴Cs and ¹³⁷Cs. Therefore, if the natural radionuclides were removed from the soil samples, the MDA of Caesium may be reduced, and the contents of ¹³⁷Cs of in the environmental soils can effectively be estimated. In the standard soil sample of Korea Institute of Nuclear Safety, radioactivity of ⁴⁰K was removed more than 84% on average, and the MDA of ¹³⁴Cs was reduced 2 times. The content of ¹³⁷Cs was recovered over 84%. On the other hand, in environmental soils, AMP precipitation method showed removal ratio of ⁴⁰K up to 180 times, which reduced the MDA about 5 times smaller than those of Direct method. ¹³⁷Cs recovery ratio showed from 54.54% to 70.06%. When considering the MDA and recovery ratio, AMP precipitation method is effective for detection of Caesium radioisotopes in low concentration.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.929-932
• /
• 2011

We developed a valve actuator controller for thruster system. This thruster system has four actuators and the actuator use a BLDC motor. Controller was made based on system and control requirement. The controller is consist of power, control and Amp. The control module use a micro-controller which is TMS320F28335 of Texas Instruments. It works for digital PID control and CAN communication and system control. The amp module for three phase BLDC motor use IGBT.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.783-787
• /
• 2013

The separation and capture process of carbon dioxide from power plants is garnering interest as a method to reduce greenhouse gas emissions. In this study, aqueous alkanolamine solutions were studied as absorbents for $CO_2$ capture. The solubility of $CO_2$ in aqueous alkanolamine solutions was investigated with a continuous stirred reactor at 313, 333 and 353 K. Also, the heat of absorption ($-{\Delta}H_{abs}$) between the absorbent and $CO_2$ molecules was measured with a differential reaction calorimeter (DRC) at 298 K. The solubility and heat of absorption were determined at slightly higher than atmospheric pressure. The enthalpies of $CO_2$ absorption in monoethanolamine (MEA), diethanolamine (DEA), triethanolamine (TEA), and 2-amino-2-methyl-1-propanol (AMP) were 88.91, 70.44, 44.72, and 63.95, respectively. This investigation showed that the heat of absorption is directly related to the quantity of heat for absorbent regeneration, and is dependent on amine type and $CO_2$ loading.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.54-60
• /
• 1997

In the SC filter consist of SC integrator and SC Lossy Integrator, after this paper proposes the method that cancels phase error using LDI clock and the imaginary part in damping term of SC Lossy integrator, LDI fifth order elliptic low-pass SC filter is designed. With the result of SCANAP program simulation applying the designed CMOS OP-Amp using power supply ${\pm}$5V and MOSIS 2--${\mu}$m double-poly double-metal n-well CMOS design rule.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.678-681
• /
• 2009

A single-pixel photon counter is designed using a folded cascode CMOS operational amplifier which is self-biased. Since there is no need for a voltage bias circuit, the layout area and power consumption of the designed counter are reduced. The signal voltage of the designed charge sensitive amplifier (CSA) with the MagnaChip $0.18{\mu}m$ CMOS process is simulated to be 138mv, near the theoretical voltage of 151mV. And the layout area of the designed counter is $100{\mu}m{\times}100{\mu}m$.