• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.227-230
• /
• 2007

In this paper, we have analyzed the change characteristics of induced noise due to the impedance change of the ground in both ends of telecommunication line. As what affects the induced noise, there are power influence or longitudinal transverse voltages and its weighted filtered voltage. In the result of measurement, we can see the noise level change due to the change of the ground impedance, that is, as the ground impedance at either end of the telecommunication line become grower, the noise level is increased, and as the ground impedance at either end of the telecommunication line become smaller, the noise level is decreased. However, we can't define the relation between ground impedance size and PIF in these measurement results, so we will have to carry out the measurement more deeply and more practically with various conditions in environmental viewpoint and/or experimental viewpoint to establish the definition between ground impedance size and PIF.

• 한국전자파학회논문지
• /
• 제14권3호
• /
• pp.226-232
• /
• 2003

본 논문에서는 파워 아일랜드(power island)의 설계지침을 연구하였다. 일반적으로 파워 아일랜드는 각 파워버스(power bus)의 구조적 공진에 의해 잡음 전달이 증가하는 단점이 있다. 따라서 본 논문에서는 잡음원의 위치를 변화시킴으로서 공진을 억제하였으며 개선된 잡음 특성을 위해서 EGI(Elevated Ground Island)를 제안하였다. 해석결과, 잡음원의 위치에 따라 파워 버스의 공진을 최소로 감소시켰으며, EGI를 이용하여 공진에 의해 발생되는 잡음 전달을 11 $\Omega$까지 감소시켰다.

• 마이크로전자및패키징학회지
• /
• 제10권1호
• /
• pp.13-18
• /
• 2003

본 논문에서는 파워 아일랜드(power island)에서 발생되는 잡음 전달을 개선하는 방법에 대해서 연구하였다. 일반적으로 파워 아일랜드는 각 파워 버스(power bus)의 구조적 공진에 의해 잡음 전달이 증가하는 단점이 있다. 따라서 본 논문에서는 두 가지의 잡음 전달 개선 방법을 제시하였다. 첫 번째로 잡음원의 위치를 변화시킴으로서 구조적 공진을 억제하였다. 두 번째로 공진이 발생할 경우 잡음 전달을 감소시키기 위해서 EGI(Elevated Ground Island)를 제안하였다. 해석결과, 잡음원의 위치에 따라 파워 버스의 공진을 최소로 감소시켰으며, EGI를 이용하여 잡음 전달을 효과적으로 감소할 수 있었다.

• 조명전기설비학회논문지
• /
• 제15권6호
• /
• pp.43-48
• /
• 2001

본 논문에서는 지중의 노이즈들로부터 영향을 받지않는 접지저항 측정시스템을 설계하였다. 일반적으로 기존 의 접지저항 측정기는 지중에 노이즈가 잠재되어 있을 경우, 접지저항 측정신호가 영향을 받아 정확한 접지저항을 측정하기 어렵다. 따라서 본 논문에서는 L-C공진필터와 마이크로프로세서를 이용하여 지중의 잡음환경에서도 정확히 접지저항을 측정할 수 있는 접지저항 측정기를 설계하였다. 또한 현장시험을 통해 설계된 접지저항측정기가 지중의 노이즈로부터 영향을 받지않음을 입증하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.77-81
• /
• 2000

The purpose of this paper is to describe a new measuring method of ground resistance for the grounding system in energized power equipment and substations. It is very difficult to measure the accurate ground resistance in energized power equipment and substations because of the noise conducted from all external connections to the grounding system and harmonics components caused by unbalanced loads and overloads. The ground resistance that is measured with existing methods includes not only the effect of desired signals but also noise components for the measurement period in grounding system. The measured value of ground resistance can entirely be different from actual value. In this paper, to eliminate 60[Hz] power system interference and harmonic components the low-pass filter method was used in the measurement of ground resistance.

• 대한전자공학회논문지SD
• /
• 제39권8호
• /
• pp.42-45
• /
• 2002

낮은 전력선 잡음과 피드쓰루 전류를 갖는 저전력 SDRAM 출력 버퍼가 소개된다. 다수의 I/O를 갖는 SDRAM 출력 버퍼에 있어서, 제안된 언더슈트 방지 회로를 통하여, 피드쓰루 전류의 감소뿐 아니라, 전력소모의 감소가 가능하다. 효율적인 피드백 방법을 사용한 풀다운 드라이버를 사용하여, 접지선 잡음을 감소시킬 수 있다. 기존의 회로에 비하여 접지선 잡음은 66.3%, 순간 전력소모는 27.5%, 평균 전력 소모는 11.4% 감소되었다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.285-288
• /
• 2007

This article presents the change characteristics of induced noise whether the sheath layer of the cable is grounded or not. As what affects the induced noise, there are power influence or longitudinal transverse voltages and its weighted filtered voltage. The sheath ground is basicaly predicted to have the effects of alleviation on the power influence. But practically the effects may not happen in the case of common cable's sheath layer. Rather there are cases that the ground of sheath affects so that the noise level could increase. So we need to scrutinize the effects of the sheath gorund in the measures for the protection against electromagnetic induction by powerline or traction line system. And the evaluation of using the designated shielding purpose cable is needed.

• 환경영향평가
• /
• 제16권1호
• /
• pp.99-105
• /
• 2007

Since 1990s, the railway noise has been researched and developed in our nation. First of all, what's causing the noise and how to eliminate the cause of the noise must be found out. Secondly, cutting off the propagation path of the noise from the noise source to the receiving points. In this study the characteristics of prediction formula for the assessment of railway noise used in some nations including Korea were investigated. In order to develop the prediction formula of the railway noise, the noise radiated from railway vehicle, rails and sleepers, characteristics of noise barrier, velocity of train, ground effects, roughness should be analyzed and predicted. Especially, on the basis of acoustics, the characteristics of source are applied to acoustic power and directivity information.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.194-202
• /
• 2017

In this study, we measured and analyzed electrical noise signals present in devices and systems operated in industrial facilities. Based on the analytic findings, we studied the most effective improvement measures for eliminating such noise signals. Leakage current and ground current generate data interferences in communication systems, and therefore we measured leakage current and ground current. We also measured and analyzed electrical noises in power systems to predict noise pathways and interference routes. Furthermore, we proposed the most effective and reliable improvement measures for blocking off various noise signals and safely eliminating them by improving the internal wiring of the facilities and grounding systems. As a final step, we conducted the proposed improvement measures and confirmed that they helped to improve the operations of the device sand systems in service by re-measuring electrical noise signals and comparing them with those measured before the proposed improvement measures were implemented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.493-498
• /
• 2004

The EMI noise source in a switching mode power supply is dominated by a common mode noise. If we can understand the common mode noise occurring mechanism, it is resulted to find out the method to suppress the EMI noise source in the switching mode power supply. The common mode noise is occurring mostly due to circuit is unbalanced which is caused by the capacitive coupling to frame ground, which passes through a heatsink of the switching devices. This research paper presents a new effective balancing method of buck converter circuit by mean of grounding the parasitic and compensation capacitors in correct proportion which is called that the common mode impedance balance (CMIB). The CMIB can be achieved by source, transmission line and termination balanced, such balancing, the common mode current will be cancelled out in the frame ground. The greatly reduced common mode noise can be confirmed by the experimental results.