• Korean Chemical Engineering Research
• /
• 제56권6호
• /
• pp.819-825
• /
• 2018

본 연구는 ${\alpha}-Fe_2O_3$ 중공입자로 구성된 다공성 1차원 나노구조체를 전기방사 공정 및 두단계의 후 열처리 과정을 통해 주형법과 커켄달 효과를 동시 적용하여 합성했다. 열처리 과정 중, 수 nm의 치밀한 Fe 금속입자는 커켄달 효과에 의해 중공구조를 갖는 ${\alpha}-Fe_2O_3$ 입자로 최종 변환되었다. 또한, 전기방사 용액에 첨가한 PS 나노비드는 첫 열처리 과정 중 분해되어 구조체 내 수많은 기공을 형성, 환원 및 산화를 위한 가스들이 구조체 내부로 원활히 침투될 수 있는 역할을 했다. 최종 생성물인 ${\alpha}-Fe_2O_3$ 중공입자로 구성된 다공성 1차원 구조체를 리튬 이차전지의 음극활물질로 적용한 결과, $1.0A\;g^{-1}$의 높은 전류밀도에도 불구하고 30 사이클 후 $776mA\;h\;g^{-1}$의 높은 방전 용량을 나타냈다. 이와 같은 우수한 리튬 저장특성은 본 구조체를 구성하는 중공형 ${\alpha}-Fe_2O_3$ 입자와 입자들 사이의 나노기공으로부터 기인한 결과이다. 본 연구에서 제안한 중공 입자로 구성된 다공성 1차원 나노구조체 합성 방법은 다양한 전이금속 화합물 조성에 적용 가능하므로 에너지 저장 분야를 포함한 여러 분야에 응용 가능하다.

• Carbon letters
• /
• 제15권1호
• /
• pp.71-76
• /
• 2014

Activated carbon nanofibers (ACNF) were prepared from polyacrylonitrile (PAN)-based nanofibers using $CO_2$ activation methods with varying activation process times. The surface and structural characteristics of the ACNF were observed by scanning electron microscopy and X-ray diffraction, respectively. $N_2$ adsorption isotherm characteristics at 77 K were confirmed by Brunauer-Emmett-Teller and Dubinin-Radushkevich equations. As experimental results, many holes or cavernous structures were found on the fiber surfaces after the $CO_2$ activation as confirmed by scanning electron microscopy analysis. Specific surface areas and pore volumes of the prepared ACNFs were enhanced within a range of 10 to 30 min of activation times. Performance of the porous PAN-based nanofibers as an electrode for electrical double layer capacitors was evaluated in terms of the activation conditions.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.672-677
• /
• 2015

Co-embedded graphitic porous carbon nanofibers(Co-GPCNFs) are synthesized by using an electrospinning method. Their morphological, structural, electrochemical, and photovoltaic properties are investigated. To obtain the optimum condition of Co-GPCNFs for dye-sensitized solar cells(DSSCs), the amount of cobalt precursor in an electrospinning solutuion are controlled to be 0 wt%(conventional CNFs), 1 wt%(sample A), and 3 wt%(sample B). Among them, sample B exhibited a high degree of graphitization and porous structure compared to conventional CNFs and sample A, which result in the performance improvement of DSSCs. Therefore, sample B showed a high current density(JSC, $12.88mA/cm^2$) and excellent power conversion efficiency(PCE, 5.33 %) than those of conventional CNFs($12.00mA/cm^2$, 3.78 %). This result can be explained by combined effects of the increased contact area between the electrode and elecytolyte caused by improved porosity and the increased conductivity caused by the formation of a high degree of graphitization. Thus, the Co-GPCNFs may be used as a promising alternative of Pt-free counter electrode in DSSCs.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.769-774
• /
• 2011

NaOH 활성화법을 이용하여 다공성 탄소나노섬유(carbon nanofibers; 이하 CNF)를 온도 범위 700~$900^{\circ}C$에서 합성하였고, 상기 제조된 다공성 CNF를 담지체로 하여 직접메탄올 연료전지의 연료극용 촉매를 제조하고 평가하였다. NaOH 활성화에 의한 CNF 표면 특성의 변화를 비표면적 및 기공 크기 분포 자료를 통하여 조사하였고, 형상 및 구조의 변화를 전자현미경을 통하여 관찰하였다. 활성화 CNF에 담지된 촉매의 활성을 메탄올 산화 특성 및 단위전지를 통하여 평가하였다. 본 활성화 방법에 의한 기공의 형성과 이에 담지된 촉매의 활성과의 관계에 대한 고찰을 하였다.

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.504-512
• /
• 1999

The high-quality carbon nanofibers were prepared by chemical vapor deposition of gas mixtures of CO-H2 and C3H8-H2 over Fe-Cu and Ni-Cu bimetallic catalysts. The yield and structure of carbon nanofiber produced were altered by the change of catalyst composition and reaction temperature. The high yields were obtained around 500$^{\circ}C$ with e-Cu catalyst and around 700-750$^{\circ}C$ with Ni-Cu catalyst and the relatively higher yields were obtained with the bimetallic catalyst containing 50-90% of Ni and Fe respectively in comparison with the pure metals. The carbon nanofibers produced over the Fe-Cu catalyst at around 500$^{\circ}C$ with the maximum yields had the highest surface ares of 160-200 m2/g around 650$^{\circ}C$ which was slightly lower than the temperature for maximum yields. In order to examine the characteristics of carbon nanofibers as catalyst support Ni and Co metals were supporte on the carbon nanofibers and CO hydrogenation reaction was performed with the catalysts. The particle size distribution of Ni and Co supported over the carbon nanofibers were 6-15 nm and the CO hydrogenation reaction rate with the carbon-nanofiber supported catalysts was much higher than that over the other supports.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.448-460
• /
• 2018

Copper nanoparticle-doped and graphitic carbon nanofibers-covered porous carbon beads were used as an efficient catalyst for treating synthetic phenolic water by catalytic wet air oxidation (CWAO) in a packed bed reactor over 10-30 bar and $180-230^{\circ}C$, with air and water flowing co-currently. A mathematical model based on reaction kinetics assuming degradation in both heterogeneous and homogeneous phases was developed to predict reduction in chemical oxygen demand (COD) under a continuous operation with recycle. The catalyst and process also showed complete COD reduction (>99%) without leaching of Cu against a high COD (~120,000 mg/L) containing industrial wastewater.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.189-190
• /
• 2009

• Carbon letters
• /
• 제19권
• /
• pp.99-103
• /
• 2016

Porous carbons have attracted much attention for their novel application in gas storage. In this study, porous graphite nano-fiber (PGNFs)-based graphite nano fibers (GNFs) were prepared by KOH activation to act as adsorbents. The GNFs were activated with KOH by changing the GNF/KOH weight ratio from 0 through 5 at 900℃. The effects of the GNF/KOH weight ratios on the pore structures were also addressed with scanning electron microscope and N₂ adsorption/desorption measurements. We found that the activated GNFs exhibited a gradual increase of CO₂ adsorption capacity at CK-3 and then decreased to CK-5, as determined by CO₂ adsorption isotherms. CK-3 had the narrowest micropore size distribution (0.6–0.78 nm) among the treated GNFs. Therefore, KOH activation was not only a significant method for developing a suitable pore-size distribution for gas adsorption, but also increased CO₂ adsorption capacity as well. The study indicated that the sample prepared with a weight ratio of ‘3’ showed the best CO₂ adsorption capacity (70.8 mg/g) as determined by CO₂ adsorption isotherms at 298 K and 1 bar.

• 유기물자원화
• /
• 제31권1호
• /
• pp.57-68
• /
• 2023

본 연구에서는 커피 폐기물 기반의 질소가 포함된 다공성 탄소 섬유 형태로 제조하여 고에너지 EDLC용 탄소 소재로 활용하고자 하였다. 커피 폐기물은 분쇄과정을 거쳐 폴리비닐피롤리돈과 용매인 다이메틸폼아마이드에 혼합한 후 전기방사를 통해 커피 폐기물 기반의 섬유 형태(Bare-CWNF)의 물질로 만들었으며, 질소 분위기의 900℃에서 탄화를 진행하여 커피 폐기물 기반의 질소가 포함된 다공성 섬유 형태(Carbonized-CWNF)의 물질을 제조하였다. Carbonized-CWNF는 Bare-CWNF와 같이 섬유 형태를 유지하였으며 질소 함량 역시 유지되는 것을 확인하였다. 커피 폐기물의 탄화 탄소(Carbonized-CW)및 폴리아크릴로나이트릴 기반의 탄소섬유(Carbonized-PNF)를 Carbonized-CWNF와 -1.0-0.0V의 전압 범위에서 전기화학적 성능을 비교한 결과, Carbonized-CWNF가 가장 높은 비정전용량(123.8F g^-1 @ 1A g^-1)을 확보할 수 있었다. 이를 통해 커피 폐기물 기반의 질소가 함유된 다공성 탄소 섬유가 고에너지 EDLC(Electric double layer capacitor)용 전극으로 우수한 성능을 나타내는 것을 확인하였다. 최종적으로, 환경 오염의 원인이 되는 식물성 바이오매스 중 커피 폐기물을 활용하여 친환경성을 확보하였고, 식물성 바이오매스와 같은 폐기물을 슈퍼커패시터와 같은 고성능 에너지 저장 매체로의 탈바꿈 할 수 있는 가능성을 제시하였다.

• 한국재료학회지
• /
• 제29권3호
• /
• pp.167-174
• /
• 2019

To improve the performance of carbon nanofibers as electrode material in electrical double-layer capacitors (EDLCs), we prepare three types of samples with different pore control by electrospinning. The speciments display different surface structures, melting behavior, and electrochemical performance according to the process. Carbon nanofibers with two complex treatment processes show improved performance over the other samples. The mesoporous carbon nanofibers (sample C), which have the optimal conditions, have a high sepecific surface area of $696m^2g^{-1}$, a high average pore diameter of 6.28 nm, and a high mesopore volume ratio of 87.1%. In addition, the electrochemical properties have a high specific capacitance of $110.1F\;g^{-1}$ at a current density of $0.1A\;g^{-1}$ and an excellent cycling stability of 84.8% after 3,000 cycles at a current density of $0.1A\;g^{-1}$. Thus, we explain the improved electrochemical performance by the higher reaction area due to an increased surface area and a faster diffusion path due to the increased volume fraction of the mesopores. Consequently, the mesoporous carbon nanofibers are demonstrated to be a very promising material for use as electrode materials of high-performance EDLCs.