• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.90-94
• /
• 2006

An electrospinning process was used to fabricate poly(methyl methacrylate) (PMMA) nanofibers embedding multi-walled carbon nanotubes(MWNTs). SEM images showed that the nanofiber surface and structural morphology depended on solvent types (dimethyl formamide, chlor-form and toluene) and carbon nanotube contents (0.5 and $3.0\;wt\%$). Nano-fiber alignments could be controlled by adjusting the electrodes configuration at collector sites. Relationship between carbon nanotube and PMMA nanofiber was studied with radius of gyration of polymer chain and carbon nanotube sizes. As the carbon nanotube content ratio increased, the number of bead increased.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.315-321
• /
• 2007

Aminated PONF-9-GMA ion exchange fabrics were synthesized by radiation induced graft copolymerization. Hybrid ion exchange fabrics combined with aminated PONF-g-GMA fabrics and anionic ion exchange resin were also fabricated by hot melt adhesion method and then their adsorption properties were investigated. Ion exchange capacity of the hybrid ion exchange fabrics was higher than ion exchange fabric and was lower than bead resin. The maximum value was 4.18 meq/g. Adsorption breakthrough time for vanadium of the hybrid ion exchange fabric was 550 min, which was faster than bead resin but slower than fibrous ion exchanger. The Breakthrough time of the hybrid ion exchange fabrics gets longer with increasing pH. The initial breakthrough time occurred around 400 min with increasing vanadium concentration.

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.311-317
• /
• 2001

In this study, we synthesized bead-type GMA-DVB copolymer using glycidylmethacrylate (GMA) with high reactivity and hydrophilicity. Macrorecticular anion exchanger containing the trimethylammonium group were then prepared by amination with trimethylammonium chloride. We observed that the size of $NO_3^-$ is smaller than that of $SO_4^{2-}$ which disturb $NO_3^-$ removal in most of coexistent anions in ground water. Thus we investigated selective affinity for $NO_3^-$ and properties of individual ion exchangers with various DVB content. For each resins, we confirmed formation of copolymer by FT-IR spectrometer and investigated ion exchange capacity, swelling ratio, the amination yield and the effect with degree of crosslinking on adsorbability for nitrate. When amount of DVB is 4 wt%, amination yield, ion exchange capacity and swelling ratio was 384.3%, 3.25 meq/g and 77.1%, respectively. In these result, it can found that synthetic optimal condition is 4 wt% DVB content for monomer.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.4-4
• /
• 2009

Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS) was welded through a combination of a diode laser and CNC. Laser beam passed the transparent PC and was absorbed in an opaque ABS. Polymers were melted and welded by absorbed and conducted heat. Experiments were carried out by varying working distance from 44mm to 50mm for the focus spot diameter control, laser input power from 10W to 25W, and scanning speed from 100 to 400mm/min. The weld bead size and the specimen cross-section were analyzed, and tensile results were presented through the joint force measurement. With focus distance at 48mm, laser power with 20W, and welding speed at 300mm/min, experimental results showed the best welding quality which bead size was 3.75mm and the shear strength was $22.8N/mm^2$. Considering tensile strength of ABS is $43N/mm^2$, shear strength was sufficient to hold two materials. A single process was possible in CNC machining processes, surface processing, hole machining and welding. As a result, the process cycle time was reduced to 25%. Compared to a typical process, specimens were fabricated in a single process, with high precision. By combining two operations processes developed process gained 50% more efficiency.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.715-725
• /
• 1996

This study represents the synthetic characteristics of styrene-DVB copolymer which is used as a catalyst support for the removal of tritium in CANDU. To evaluate the effect of solvent on the styrene-DVB polymeric support, the solvating power dependent on various kinds and composition of solvents was calculated. In order to synthesize the macroreticular type polymer bead, the following conditions are needed; solvating power should be higher than 1 for 20% of crosslinkage and higher than 3 for 40% of crosslinkage. Stabilization of organic monomers at about $40^{\circ}C$ for more than 2 hours is prerequisite. Removal of solvent prior to drying is preferred for the post-treatment of the bead. The polymer particle size was increased by lowering concentration of surfactant and stirring speed.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.69-74
• /
• 2003

In this study, we have investigated the adsorption properties for nitrate ion in ground water using mixed resin type hybrid ion exchange (HIXF) and fiber type ion exchanger. Their swelling ratio (4.45 g/g) and ion exchange capacities (2.45 meq/g) were higer than the swelling ratio of IEC and IXF. Adsorption yield increased for nitrate $NO_3^-$ and sulfate $SO_4^{2-}$ ions were optimal at the concentration ratios of nitrate and sulfate below 1.0 and the adsorption yields were 100% and 20%, respectively. On the other hand it was shown that the degree of adsorpted for nitrate to pH 3, but it was little changed in the other pH range. We found that the selective adsorption capacity for nitrate was the optimal the mixing ratios of resin and fibrous ion exchanger of below 0.5.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.61-68
• /
• 2003

In this study, we have investigated the preparation of mixed bead and fiber type hybrid ion-exchanger for recovering nickel ion from plating rinse water. There was little dependence of adsorption capacity for nickel ion on the mixing ratio of resin type and fiber type of ion exchangers. However, it increased with increasing the resin content in the mixed bed. It was shown that the data Langmuir and Freundlich's adsorption isotherm model were well fitted to the linear. Affinity between the functional groups in the ion exchanger and nickel ion in the process was confirmed. The pressure drop decreased with increasing the number of stage in the multistage bed, but it increased with increasing the resin content in the mixing bed. The initial breakthrough time in the multistage bed was short due to the increase of number of stage in the continuous process. It was found that the final breakthrough time of the multistage bed was little changed. The breakthrough time decreased with increasing the amount of fibrous ion exchanger in the mixed bed. The maximum adsorption capacities of the mixed and multistage beds were 2.51 meq/g and 2.69 meq/g, respectively. The desorption time for the nickel ion with $1N H_2SO_4$ solution was lower than 10 minutes and the yield of desorption was greater than 98 percent.

• Membrane Journal
• /
• v.29 no.4
• /
• pp.231-236
• /
• 2019

In this study, alginate-based hydrogel membranes composed of hydrogel beads and highly tough hydrogel matrix including moisturizing oil and natural emulsifier were prepared and their elution characteristics were evaluated. As a result, it was confirmed that the elution rate of the moisturizing oil component can be controlled within a desired range by controlling the composition of the hydrogel bead and the tough hydrogel matrix. In particular, it has been confirmed that by combining tough hydrogel having a structure of interpenetrating polymer network (IPN) and hydrogel beads, the physical stability of the membranes can be improved and the elution rate of the moisturizing oil can also be controlled more finely.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.288-293
• /
• 2005

Osmotic granule system which is one of the drug delivery systems has been developed to improve manufacturing process and other problems of tablet osmotic systems. It consists of water swellable seed layer, nifedipine drug layer, and drug release controlled membrane layer and manufactured by fluidized bed coater. The granule size and mombrane thickness can be controlled by various amounts of seed and coating solution, respectively. It could be observed that the morphology of osmotic granule was different at each coating step as well as type of coating solution. The bigger the size of granule, the slower the release rate was observed due to decreasing the total specific surface wed of granule. Also, it was observed that the increase of membrane thickness was caused to retard the dissolution of nifedipine due to decreasing the water absorption rate. The drug solubility for dissolution media is greatly affected to nifedipine release. From these results, we assured that osmotic granule can be fabricated by fluidized bed coating methods, and the appropriate release profile could be controlled by the controlling of bead size, membrane thickness and dissolution media.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.489-492
• /
• 2005

We report new polymer stabilized ferroelectric liquid crystal (PSFLC) cells with mechanical stability which is achievable by introducing photospacers in the cells. It was found that the mechanical st ability of the PSFLC cell was effected by introduction of photo spacers. We analyzed the dependence of mechanical stability and memory property on the density of photospacers in the PSFLC cell. The stability and memory properties of PSFLC Cells depending on photospacer density are discussed. 1. Introduction Recently, flexible displays have attracted much attention because they have remarkable advantages: thinner, lighter, non-breakable and conformable features. Flexible displays have various potential applications such as e-book and e-paper displays utilizing the distinct features. E-book and E-paper displays demand very low power consumption, so that bistable memory liquid crystal modes are required in case of flexible plastic LCDs for those application. Three kinds of memory LC modes have been developed; bistable nematic, bistable cholesteric and bistable FLC. Among them SSFLC as one of bistable FLC has big advantages such as low driving voltage, wide view angle and fast response time, SSFLC cells are, however, very weak against mechanical shock. Polymer stabilized FLC (PSFLC) has been developed to overcome the poor mechanical stability of SSFLC. PSFLC was known to have network structure that FLCs are oriented with smectic layer ordering in polymer network. The polymer network stabilizes the FLC orientation, which leads to improvement of mechanical stability of PSFLCD. A lot of studies have been done for the application of PSFLC to flexible $LCDs.^{[1{\sim}12]}$ However, it should be noted that PSFLC does not have sufficient mechanical stability for the particular applications such as smart card LCD, where LCD is highly bendable.Bead spacer was mainly used to maintain cell gap of conventional PSFLCDs. But the spacer density of it is not locally uniform in the cell, so that it is generally difficult that the PSFLCDs with bead spacers show sufficient mechanical stability. In order to more improve the mechanical stability of PSFLCDs, we introduced photospacers into PSFLCDs. In this paper, we describe the improvement of mechanical stability by introducing photospacers into PSFLCDs.