• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.1-5
• /
• 2008

The gas atmosphere in continuous annealing and galvanizing lines alters both composition and microstructure of the surface and sub-surface of sheet steel. The formation and morphology of the oxides of alloying elements in High Strength Interstitial Free (HS-IF), Dual Phase (DP) and Transformation-Induced Plasticity (TRIP) steels are strongly influenced by the furnace dew point, and the presence of specific oxide may result in surface defects and bare areas on galvanized sheet products. The present contribution reviews the progress made recently in understanding the selective formation of surface and subsurface oxides during annealing in hot dip galvanizing and conventional continuous annealing lines. It is believed that the surface and sub-surface composition and microstructure have a pronounced influence on galvanized sheet product surface quality. In the present study, it is shown that the understanding of the relevant phenomena requires a combination of precise laboratory-scale simulations of the relevant technological processes and the use of advanced surface analytical tools.

• Corrosion Science and Technology
• /
• 제7권6호
• /
• pp.301-306
• /
• 2008

Surface composite layers of 1.9~2.9 mm in thickness were fabricated by depositing metamorphic powders on a carbon steel substrate and by irradiating with a high-energy electron beam. In the surface composite layers, 48~64 vol.% of $Cr_{2}B$ or $Cr_{1.65}Fe_{0.35}B_{0.96}$ borides were densely precipitated in the austenite or martensite matrix. These hard borides improved the hardness of the surface composite layer. According to the otentiodynamic polarization test results of the surface composites, coatings, STS304 stainless steel, and carbon steel substrate, the corrosion potential of the surface composite fabricated with 'C+' powders was highest, and its corrosion current density was lowest, while its pitting potential was similar to that of the STS304 steel. This indicated that the overall corrosion resistance of the surface composite fabricated with 'C+' powders was the best among the tested materials. Austenite and martensite phases of the surface composites and coatings was selectively corroded, while borides were retained inside pits. In the coating fabricated with 'C+' powders, the localized corrosion additionally occurred along splat boundaries, and thus the corrosion resistance of the coating was worse than that of the surface composite.

• Corrosion Science and Technology
• /
• 제2권6호
• /
• pp.260-265
• /
• 2003

The experimental methods to rapidly and stably reproduce Microbially Influenced Corrosion (MIC) of stainless steel by sulfate-reducing bacteria such as Desulfovibrio vulgaris were developed. In this study, using two types of stainless steel, 304 and 444, obtained from Pohang Steel & Iron Co., Ltd. (POSCO)., three major factors were tested; overall medium composition, dilution ratio, and chloride concentration. In the overall medium tests, three different media were prepared according to $FeSO_4$ concentration; PM (original Postgate's medium No. 2), MPM 1 (modified PM, no $FeSO_4$, MPM 2 (modified PM, 1/10 $FeSO_4$). The effects of various dilution ratios (3, 1, 1/3, 1/10, 1/30, and 1/100 times) and chloride concentrations (0.0067M, 0.01M, 0.05M, and 0.1M) were examined during 2 months cultivation. Through SEM (Scanning Electron Microscopy) observation, the diluted and modified media, particularly the $1/3{\times}MPM$ I medium, showed more micro-pitting points on surfaces compared to the original PM medium. High concentrations of chloride ions (above 0.05M) were not adequate for observation of MIC since those brought about non-microbiologically induced corrosion. From this study, the optimization of medium composition was very effective to routinely observe MIC in a laboratory system.

• 한국재료학회지
• /
• 제21권6호
• /
• pp.303-308
• /
• 2011

The effect of heat treatment on the micro-structures and the mechanical properties of 0.002% boron added low carbon steel was investigated. The tensile strength reached the peak at about $880-890^{\circ}C$ with the rising quenching temperature and then the hardness decreased sharply, but the tensile strength hardly decreased. The tensile and yield strength decreased and the total elongation increased with a rising tempering temperature, but the tensile and yield strength sharply fell and the total elongation prominently increased from above a $400-450^{\circ}C$ tempering temperature. Tempered martensite embrittlement (TME) was observed at tempering condition of $350-400^{\circ}C$. In the condition of quenching at $890^{\circ}C$ and tempering at $350^{\circ}C$, the boron precipitates were observed as Fe-C-B and BN together. The hardness decreased in proportion to the tempering temperature untill $350^{\circ}C$ and dropped sharply above $400^{\circ}C$ regardless of the quenching temperature.

• Molecules and Cells
• /
• 제19권3호
• /
• pp.375-381
• /
• 2005

Phospholipase C-${\beta}$ (PLC-${\beta}$) hydrolyses phosphatidylinositol 4,5-bisphosphate and generates inositol 1,4,5-trisphosphate in response to activation of various G protein-coupled receptors (GPCRs). Using glial cells from knock-out mice lacking either PLC-${\beta}1$ [PLC-${\beta}1$ (-/-)] or PLC-${\beta}3$ [PLC-${\beta}3$ (-/-)], we examined which isotype of PLC-${\beta}$ participated in the cellular signaling events triggered by thrombin. Generation of inositol phosphates (IPs) was enhanced by thrombin in PLC-${\beta}1$ (-/-) cells, but was negligible in PLC-${\beta}3$ (-/-) cells. Expression of PLC-${\beta}3$ in PLC-${\beta}3$ (-/-) cells resulted in an increase in pertussis toxin (PTx)-sensitive IPs in response to thrombin as well as to PAR1-specific peptide, while expression of PLC-${\beta}1$ in PLC-${\beta}1$ (-/-) cells did not have any effect on IP generation. The thrombin-induced $[Ca^{2+}]_i$ increase was delayed and attenuated in PLC-${\beta}3$ (-/-) cells, but normal in PLC-${\beta}1$ (-/-) cells. Pertussis toxin evoked a delayed $[Ca^{2+}]_i$ increase in PLC-${\beta}3$ (-/-) cells as well as in PLC-${\beta}1$ (-/-) cells. These results suggest that activation of PLC-${\beta}3$ by pertussis toxin-sensitive G proteins is responsible for the transient $[Ca^{2+}]_i$ increase in response to thrombin, whereas the delayed $[Ca^{2+}]_i$ increase may be due to activation of some other PLC, such as PLC-${\beta}4$, acting via PTx-insensitive G proteins.

• 광물과 암석
• /
• 제35권3호
• /
• pp.235-258
• /
• 2022

한반도 동남부에서 가장 규모가 큰 마이오세 포항분지의 남서부를 대상으로 상세한 지질도 작성과 지질구조를 분석하여 분지 발달사를 해석하였다. 포항분지 남서부는 북북동 방향의 분지 내 지구내지루에 의해 기하와 변형사가 서로 다른 서쪽의 보문구역과 동쪽의 오천구역으로 나누어진다. 보문구역은 포항분지 초기 확장 이후 거의 변형되지 않은 반면, 오천구역은 충전물의 퇴적 이후에도 후기 변형이 지속·중첩된 지역이다. 따라서 보문구역은 포항분지 최초 확장 형식에 대한 중요한 정보를 제공한다. 보문구역은 북북동 방향의 정단층들과 북북서(북서) 방향의 우수향 주향이동단층 분절들이 지그재그로 이어진 서편 경계단층에 의해 침강이 주도되었으며, 이 경계단층은 남쪽으로 한반도 동남부 마이오세 지각변형의 서쪽 한계선이며 우수향 주향이동성 주변위대로 알려진 연일구조선과 연결된다. 따라서 포항분지는 17-16.5 Ma 경 활동을 시작한 연일구조선 북쪽 말단에 우향스텝 형태로 생성된 북북동 방향의 정단층 또는 사교이동단층에 의해 서북서-동남동 방향으로 확장된 횡인장단층말단분지로 최초 침강된 것으로 해석된다. 이로 인해 보문구역에는 서쪽으로 갈수록 분지의 깊이가 더 깊어지는 북북동 방향의 비대칭 지구 또는 반지구가 생성되었다. 이후 포항분지의 확장과 변형은 오천구역을 포함하는 보다 동편 지역으로 이동하였다.

• 한국광물학회지
• /
• 제15권3호
• /
• pp.171-181
• /
• 2002

포항지역 제3기 해성퇴적층에서 산출되는 해록석의 생성과정을 해록석 형태와 화학분석에 의하여 연구하였다. 사암 내에서 산발적으로 산출되는 해록석은 뚜렷한 두 단계의 광물형태와 성분변화가 나타난다. 해록석의 결정화는 펠 형태 입자의 내부에서 우선적으로 시작되어 외부쪽으로 K와 Fe 성분이 증가하고 Al 성분이 감소하는 경향을 보인다 더욱이 스멕타이트와 비슷한 조성의 해록석은 K와 Al 성분이 증가하고 Fe 성분이 감소하면서 해록석/스멕타이트 혼합층광물 단계를 거쳐서 일라이트와 비슷한 조성의 해록석으로 진화하여 간다.화하여 간다.

• 한국대기환경학회지
• /
• 제22권2호
• /
• pp.223-233
• /
• 2006

We analyzed the monthly and seasonal mean of the daily Erythemal Ultraviolet-B (EUV-B, $280{\sim}320nm$) irradiance operating in Pohang, Anmyeon, Gosan, Mokpo and Kangnung with UV-Biometer (Solar Light Co., Model No. 501) at clear-sky noon during the period from 1999 to 2004. Also, we investigated the seasonal and regional characteristics for the UV index over the Korean Peninsula. The daily maximum occurred near solar southing time and the highest monthly accumulated EUV-B irradiance appeared in July and August at each regional observatory. The monthly mean value of the clear-sky EUV-B irradiance in Pohang, Anmyeon, Gosan, Mokpo and Kangnung showed 196.6, 161.8, 221.9, $171.5mWm^{-2}\;and\;179.7mWm^{-2}$ near noon in July respectively. The annual mean value of the daily accumulated EUV-B irradiance in Pohang, Anmyeon, Gosan, Mokpo and Kangnung were 1.8, 2.1, 2.2, $1.8kJm^{-2}\;and\;1.5kJm^{-2}$ respectively. The UV Index (UVI) showed above UVI 7(High) more than 90 days during one year over the Korean Peninsula.

• 건축사
• /
• 통권506호
• /
• pp.56-63
• /
• 2011

• 건축사
• /
• 통권518호
• /
• pp.52-57
• /
• 2012