• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.92-97
• /
• 2016

This paper presents design and simulation of wide band RF microswitch that uses electrostatic actuation for its operation. RF MEMS devices exhibit superior high frequency performance in comparison to conventional devices. Similar techniques that are used in Very Large Scale Integration (VLSI) can be employed to design and fabricate MEMS devices and traditional batch-processing methods can be used for its manufacturing. The proposed switch presents a novel design approach to handle reliability concerns in MEMS switches like dielectric charging effect, micro welding and stiction. The shape has been optimized at actuation voltage of 14-16 V. The switch has an improved restoring force of 20.8 μN. The design of the proposed switch is very elemental and primarily composed of electrostatic actuator, a bridge membrane and coplanar waveguide which are suspended over the substrate. The simple design of the switch makes it easy for fabrication. Typical insertion and isolation of the switch at 1 GHz is -0.03 dB and -71 dB and at 85 GHz it is -0.24 dB and -29.8 dB respectively. The isolation remains more than - 20 db even after 120 GHz. To our knowledge this is the first demonstration of a metal contact switch that shows such a high and sustained isolation and performance at W-band frequencies with an excellent figure-of merit (fc=1/2.pi.Ron.Cu =1,900 GHz). This figure of merit is significantly greater than electronic switching devices. The switch would find extensive application in wideband operations and areas where reliability is a major concern.

• 한국산업보건학회지
• /
• 제27권2호
• /
• pp.123-129
• /
• 2017

Objectives: The purpose of this study is to enhance the application of analytical method of polar solvents(alcohols) by GCOTC (gas chromatography open tubular column) through the system suitability test(SST) to estimate the whole chromatographic system performance(integral part). Methods: To perform the SST, carried out repeatability(n=6) as analytical method of polar solvents by GCOTC, got the retention time($t_R$), standard deviation(${\sigma}_{n-1}$) of $t_R$, baseline width($w_b=4{\sigma}_{n-1}$) and calculated dead time($t_m$) by $v_m=d^2{\pi}L(f/4)$ and $v_m=t_m$ x flow rate. Results: In this experiment, obtained the basic data, there were $t_m=2$ min, methanol($t_R=3.569$, ${\sigma}_{n-1}=0.01$, $w_b=0.04$), ethanol ($t_R=3.892$, ${\sigma}_{n-1}=0.004$, $w_b=0.016$), isopropanol($t_R=4.209$, ${\sigma}_{n-1}=0.004$, $w_b=0.016$). By using these data, calculated the corrected retention time($t_R{^{\prime}}$), capacity factor(k), separation factor(${\alpha}$), number of theoretical plate(n) and resolution($R_s$) for SST and got the good results. Conclusions: Through the SST, could reconfirm the whole chromatographic performance system(integral part) for analytical method of polar solvents by GCOTC. Therefore, this analytical method expect to be widely applied at the related areas.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4044-4052
• /
• 1996

Planar images of OH and $O_{2}$ with tunable KrF excimer laser which has a) 0.5 $cm^{-1}$ / linewidth, b) 0.5 nm tuning range, c) 150 mJ pulse energy, and d) 20 ns pulse width are obtained to determine spatial distributions of OH and $O_{2}$ in premixed $C_{3}$H$_{8}$ /O$_{2}$ flame. The technique is based on planar laser induced pre-dissociative fluorescence(PLIPF) in which collisional quenching is almost avoided because of the fast pre-dissociation. Dispersed LIPF spectra of OH and $O_{2}$ are also measured in a flame in order to confirm the excitation of single vibronic state of OH and $O_{2}$, OH and $O_{2}$ are excited on the P$_{2}$(8) line of the $A^{2}$.SIGMA.$^{+}$(v'= 3)-X$^{2}$.PI.(v'||'||'&'||'||'quot;= 0) band and R(17) line of the Schumann-Runge band B$^{3}$.SIGMA.$_{u}$ $^{[-10]}$ (v'= 0)- X$^{3}$.SIGMA.$_{g}$ $^{[-10]}$ (v'||'||'&'||'||'quot;= 6), respectively. Dispersed OH and $O_{2}$ spectra show an excellent agreement with simulated spectrum and previous works done by other group respectively. It is confirmed that OH widely distributed around flame front area than $O_{2}$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.20-20
• /
• 1998

I Ion beam technology has recently attracted much interest because it has exciting t technological p아:ential for surface analysis, ion beam mixing, surface cleaning and etching i in thin film growth and semiconductor fabrication processes, etc. Es야~cially, ion beam s sputtering has been widely used for sputter depth profiling with x-photoelectron S spectroscopy (XPS) , Auger electron s$\pi$~troscopy(AES), and secondary-ion mass S야i따oscopy(SIMS). However, The problem of surface compositional ch없1ge due to ion b bombardment remains to be understo여 없ld solved. So far sputtering processes have been s studied by s따face an외ysis tools such as XPS, AES, and SIMS which use the sputtering p process again. It would be improbable to measure the modified surface composition profiles a accurately due to ion beam bombardment with surface analysis techniques based on sputter d depth profiling. However, recently Medium energy ion scattering spectroscopy(MEIS) has b been applied to study the sputtering of solid surface at ion bombardment and has been p proved that it has been extremely valuable in probing the surface composition 뻐d s structure nondestructively and quantita디vely with less than 1.0 nm depth resolution. To u understand the sputtering processes of solid surface at ion bombardment, The Molecular D Dynamics(MD) and Monte Carlo(MC) simulation has been used and give an intimate i insight into the sputtering processes of solid surfaces. In this presentation, the sputtering processes of alloys and compound samples at ion b bombardment will be reviewed and the MEIS results for the Ar+ sputter induced altered l layer of the TazOs thin film 뻐dd없nage profiling of Ar+ ion sputt얹"ed Si(100) surface will b be discussed with the results of MD and MC simulation.tion.

• Clinical and Experimental Reproductive Medicine
• /
• 제29권4호
• /
• pp.229-236
• /
• 2002

Objective : The purpose of this study was to evaluate the effect of Cytochalasin B (CCB) on the cytoskeletal stability of mouse oocyte frozen by vitrification. Methods : Mouse oocytes retrieved from cycle stimulated by PMSG and hCG were treated by CCB and then vitrified in EFS-30. These oocytes were placed onto an EM grid and submerged immediately in liquid nitrogen. Thawing of the oocytes was carried out at room temperature for 5 seconds, then the EM grid was placed into 0.75 M, 0.5 M and 0.25 M sucrose at $37^{circ}C$ for 3 minutes, each. These oocytes were fixed in 4% formaldehyde for an hour and then washed in PPB for 15 minutes 3 times, then incubated in PPB containing anti-tubulin monoclonal antibody at $4^{circ}C$ overnight. And then, the oocytes were incubated with FITC-conjugated anti-mouse IgG and propidium iodide (PI) for 45 minutes. Pattern of microtubules and microfilaments of oocytes were evaluated with a confocal microscope. Results: The rate of oocytes containing normal microtubules and microfilaments was significantly decreased after vitrification. The rate of oocyte containing normal microtubules in CCB treated group was higher than those in non-treated group (53.7% vs. 48.9%), but the difference was not significant. The rate of oocyte containing normal microfilaments in CCB treated group was significantly higher than those in non-treated group (64.5% vs. 38.3%, p<0.05). Conclusion: Microfilaments stability could be improved by CCB treatment prior to vitrification. It is suggested that CCB treatment prior to vitrification improve stability of cytoskeleton and then increase success rate in IVF-ET program using vitrification and thawing oocyte.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1999년도 제13회 식물생명공학심포지움 New Approaches to Understand Gene Function in Plants and Application to Plant Biotechnology
• /
• pp.21-35
• /
• 1999

We have previously isolated OsMADS4 gene that is a member of the class B MADS box genes from rice. In this study, another member of the class B MADS box genes was isolated from rice flower by the yeast two-hybrid screening method using OsMADS4 as bait. RNA blot analyses revealed that the clone, OsMADS16, was expressed in the second and third whorls, whereas the OsMADS4 transcripts were present in the second, third, and fourth whorls. These expression patterns of the OsMADS16 and OsMADS4 genes are very similar with those of AP3 and PI, the class B genes of Arabidopsis, respectively. In the yeast two-hybrid system, OsMADS4 interacted only with OsMADS16 among several rice MADS genes investigated, suggesting that OsMADS4 and OsMADS16 function as a heterodimer in specifying sepal and petal identities. We have also isolated OsMADS6 gene using OsMADS1 as a probe. Both are members of the AGL2 MADS family. Various MADS genes that encode for protein-protein interaction partners of the OsMADS6 protein were isolated by the yeast two-hybrid screening method. A majority of these genes belong to the AGL2 family. Sequence Homology, expression pattern, and ectopic expression phenotypes indicated that one of the interaction partners, OsMADS14, appears to be homologous to API, the class A MADS gene of Arabidopsis.

• 한국정보통신학회논문지
• /
• 제2권1호
• /
• pp.45-51
• /
• 1998

이동통신에서는 수십 kbps 이상의 고속 디지털전송을 실현하는데 있어서 멀티패스파에 의한 지연왜곡이 수반되므로 전송로 변동, 즉 주파수선택성 페이딩을 극복하는 기술이 확립되지 않으면 안된다. 본 논문에서는 판정귀환형 등화기의 제어 알고리즘으로써 지수적 가중계수에 의한 RLS 알고리즘을 개량한 피드백러닝 RLS 알고리즘을 제안하고 랜덤 가우시안 잡음하에서 정적인 1파 모델과 2파 모델에 대한 등화기의 동작특성을 컴퓨터 시뮬레이션 실험을 통하여 검토 분석하였다. 컴퓨터 시뮬레이션 실험결과 $\lambda$= 0.9, S/N = 10 [dB], S/I = 20 [dB]에서 지연파의 지연시간을 1심볼까지 변화시켰을 때 우수한 추종특성과 등화특성을 보였다.

• Journal of Ginseng Research
• /
• 제43권1호
• /
• pp.95-104
• /
• 2019

Background: Oxidized low-density lipoprotein (ox-LDL) causes vascular endothelial cell inflammatory response and apoptosis and plays an important role in the development and progression of atherosclerosis. Ginsenoside compound K (CK), a metabolite produced by the hydrolysis of ginsenoside Rb1, possesses strong anti-inflammatory effects. However, whether or not CK protects ox-LDL-damaged endothelial cells and the potential mechanisms have not been elucidated. Methods: In our study, cell viability was tested using a 3-(4, 5-dimethylthiazol-2yl-)-2,5-diphenyl tetrazolium bromide (MTT) assay. Expression levels of interleukin-6, monocyte chemoattractant protein-1, tumor necrosis factor-${\alpha}$, intercellular adhesion molecule-1, and vascular cell adhesion molecule-1 were determined by enzyme-linked immunosorbent assay and Western blotting. Mitochondrial membrane potential (${\Delta}{\Psi}m$) was detected using JC-1. The cell apoptotic percentage was measured by the Annexin V/ propidium iodide (PI) assay, lactate dehydrogenase, and caspase-3 expression. Apoptosis-related proteins, nuclear factor $(NF)-{\kappa}B$, and mitogen-activated protein kinases (MAPK) signaling pathways protein expression were quantified by Western blotting. Results: Our results demonstrated that CK could ameliorate ox-LDL-induced human umbilical vein endothelial cells (HUVECs) inflammation and apoptosis, $NF-{\kappa}B$ nuclear translocation, and the phosphorylation of p38 and c-Jun N-terminal kinase (JNK). Moreover, anisomycin, an activator of p38 and JNK, significantly abolished the anti-apoptotic effects of CK. Conclusion: These results demonstrate that CK prevents ox-LDL-induced HUVECs inflammation and apoptosis through inhibiting the $NF-{\kappa}B$, p38, and JNK MAPK signaling pathways. Thus, CK is a candidate drug for atherosclerosis treatment.

• 대한금속재료학회지
• /
• 제47권9호
• /
• pp.586-590
• /
• 2009

The effects of additives on the surface morphology and physical properties of copper electrodeposited on polyimide(PI) film were investigated here. Two kinds of additives, an activator(additive A) and a leveler(additive B),were used in this study. Electrochemical experiments, in conjunction with scanning electron microscopy(SEM), X-ray diffraction(XRD) and a four-point probe, were performed to characterize the morphology and mechanical characteristics of copper electrodeposited in the presence of the additives. The surface roughness, crystal growth orientation and resistivity could be controlled using various quantities of additive B. High resistivity and lower peel strength were observed on the surface of the copper layer electroplated onto the electrolyte with no additive B. However, a uniform surface, lower resistivity and high flexibility were obtained with a combination of 20 ppm of additive A and 100 ppm of additive B.

• 디지털융복합연구
• /
• 제19권6호
• /
• pp.11-21
• /
• 2021

본 연구는 인문계열 학생들에게 생소하고 어려운 프로그래밍 교육의 효과적인 학습이 가능하도록 비교과프로그램 운영을 통한 학습의 효과성을 살펴보고자 한다. 인문계열 학생들 A학과와 B학과 70명 대상으로 한 학기 수업을 통해 수집된 학습관련 데이터와 창의융합 앱개발 공모전 비교과프로그램 활동을 통해 수집한 데이터, 설문지를 바탕으로 분석한 결과 비교과프로그램 활동이 학업성취도에 영향을 미치는 것으로 나타났다. 교육과정 참여 전후에 실시한 학생들의 핵심역량 진단 검사결과는 교육과정 참여 후 핵심역량이 A학과와 B학과 모두 향상된 것으로 나타났다. 본 연구는 비교과프로그램 활동이 개인의 역량 증진에 도움이 됨과 동시에 은둔형 학생들에게 맞춤지도를 하여 학업성취도 향상을 기대할 수 있다고 본다. 향후 수업진행시 일반적인 앱개발보다는 전공과 관련된 앱을 개발할 수 있도록 학과별 맞춤지도를 하여 전공분야와 융합하여 문제를 해결할 수 있는 능력, 컴퓨팅적 사고력, 창의적 사고력 향상을 기대해 본다.