• 농촌계획
• /
• 제25권4호
• /
• pp.119-128
• /
• 2019

Although the General Agricultural Fishing Village Development Project had a significant impact on the landscape formation and management in rural area, the rural landscape planning and project sectors was not stable by fluctuation variables. On the basic understanding the institutional status of rural landscape planning, some conclusions could be discussed as follows through the analysis of quantitative and qualitative changes and the background factors. The rural landscape plan lacked its own legal and institutional foundations, and the landscape project of the General Agricultural Fishing Village Development Project was mainly focused on the environment-improving H/W project for expanding the basic living infrastructures. In order to reflect the characteristics of the region and become independent rural landscape management, it is necessary to change the contents so that the S/W business such as the deepening landscape awareness and empowerment linked with improving the physical landscape. To this end, it is necessary to establish a foundation for the rural landscape planning system to have its own status, and it seems to seek to supplement with what is included S/W contents reflecting the context of higher level landscape planning. The landscape sector of the General Agricultural Fishing Village Development Project proved to be in the process of shrinking in both quantity and quality, despite the temporary expansion in the past. In addition, considering the distortion of the contents of landscape projects in rural sites, it seems that the rural landscape-related public project are now in a position to seek a new phase change beyond quantitative expansion. In particular, along with institutional improvements to secure the independent status of rural landscape planning that contributes to village community regeneration and social sustainability through the role of intermediary support organizations in landscape management activities. Through the integrated landscape plan, which is established in advance and led by the residents in the early stages, there is a need to change the direction to enhance meaning of the landscape planning goes beyond the facility design or space improvement.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.122-127
• /
• 2013

고성능 폐회로 액체로켓엔진 시스템에 적용되는 산화제 과잉 예연소기 내에서 발생하는 연소 압력 섭동 데이터에 대한 분석 결과를 수록하였다. 연소실험은 두 단계의 압력 값을 순차적으로 형성하였는데 상대적으로 저압 조건에서만 78 Hz의 특성 주파수를 갖는 자발적인 압력 섭동이 발생하였다. 이와 같은 연소 불안정은 bulk mode에 해당하는 것으로 판단된다. 압력 섭동의 세기는 rms 기준으로 연소실 정압 대비 13.3%에 해당하며, 설계압 구간(19.3 MPa)에서는 매우 안정적인 모습을 보였다. 이와 같은 bulk mode는 연소실 내부에서 특성 압력파의 위상차가 없이 전체 공간에서 압력이 증가와 감소를 반복하는 것으로 Helmholtz 공진기와 비슷한 특성을 보이는 것으로 판단된다.

• Current Optics and Photonics
• /
• 제4권4호
• /
• pp.286-292
• /
• 2020

Imaging through multicore fiber (MCF) is of great significance in the biomedical domain. Although several techniques have been developed to image an object from a signal passing through MCF, these methods are strongly dependent on the surroundings, such as vibration and the temperature fluctuation of the fiber's environment. In this paper, we apply a new, strong technique called deep learning to reconstruct the phase image through a MCF in which each core is multimode. To evaluate the network, we employ the binary cross-entropy as the loss function of a convolutional neural network (CNN) with improved U-net structure. The high-quality reconstruction of input objects upon spatial light modulation (SLM) can be realized from the speckle patterns of intensity that contain the information about the objects. Moreover, we study the effect of MCF length on image recovery. It is shown that the shorter the fiber, the better the imaging quality. Based on our findings, MCF may have applications in fields such as endoscopic imaging and optical communication.

• 대한금속재료학회지
• /
• 제49권4호
• /
• pp.321-328
• /
• 2011

The 30 nm-thick Ni layers was deposited on a flexible polyimide substrate with an e-beam evaporation. Subsequently, we deposited a Si layer using a catalytic CVD (Cat-CVD) in a hydride amorphous silicon (${\alpha}$-Si:H) process of $T_{s}=180^{\circ}C$ with varying thicknesses of 55, 75, 145, and 220 nm. The sheet resistance, phase, degree of the crystallization, microstructure, composition, and surface roughness were measured by a four-point probe, HRXRD, micro-Raman spectroscopy, FE-SEM, TEM, AES, and SPM. We confirmed that our newly proposed Cat-CVD process simultaneously formed both NiSi and crystallized Si without additional annealing. The NiSi showed low sheet resistance of < $13{\Omega}$□, while carbon (C) diffused from the substrate led the resistance fluctuation with silicon deposition thickness. HRXRD and micro-Raman analysis also supported the existence of NiSi and crystallized (>66%) Si layers. TEM analysis showed uniform NiSi and silicon layers, and the thickness of the NiSi increased as Si deposition time increased. Based on the AES depth profiling, we confirmed that the carbon from the polyimide substrate diffused into the NiSi and Si layers during the Cat-CVD, which caused a pile-up of C at the interface. This carbon diffusion might lessen NiSi formation and increase the resistance of the NiSi.

• 한국해안·해양공학회논문집
• /
• 제32권6호
• /
• pp.411-419
• /
• 2020

벌집구조 파에서 나타나는 연속된 쇄파 파봉선 끝단사이로 발달하는 이안류를 수리실험을 통해 재현하고 시간에 따라 발달하는 과정을 정사보정 영상을 통해 관찰하였다. 서로 다른 두 협각의 파랑 중첩에 의해 생성되는 벌집구조 파를 재현하는 대신에 조파장치를 횡방향 두 그룹으로 나누어 역 위상으로 구동시켜 규칙파를 조파하므로 유사 벌집구조 파형을 생성하여 실험을 수행하였다. 수리 실험에서 재현된 이안류의 유속을 계측하기 위해 LSPIV (Large Scale Particle Image Velocimetry) 기법을 이용하였다. 관측을 통해 노드영역을 따라 생성되는 이안류를 확인하였고, 시간에 따라 흐름이 전단 파동(shear fluctuation)을 포함하여 발달하는 비정상 이안류의 유속 분포를 제시하였다. 또한, LSPIV 기법으로 계측된 유속의 시계열을 통하여 파주기 및 상대적으로 긴 주기의 요동에 따른 유속 성분을 확인할 수 있었다.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.335-346
• /
• 2021

Since epoxy resin coating shows excellent properties in formability, adhesion, and corrosion resistance, they have been extensively used in many industries. However, various types of damages in the epoxy coated tube within a relative short time have been reported due to cavitation erosion, liquid impingement, variation of temperature and pressure. Nevertheless, there has been little research on the effect of temperature on the cavitation degradation of epoxy coatings. Therefore, this work used an ultrasonic cavitation tester to focus on the effect of solution temperature on the cavitation properties of 3 kinds of epoxy coatings in 3.5% NaCl. The cavitation properties were discussed basis on the material properties and environmental aspects. As the solution temperature increased, even though with large fluctuation, the cavitation degradation rates of A and B coatings were reduced rapidly, but the rate of C coating was decreased gradually. In addition to the cushioning effect, the reason that the cavitation degradation rate reduced with solution temperature was partly related to the brittle fracture and water absorptivity of the epoxy coatings, and the water density, but was little related to the shape and composition of the compound in the coatings or the phase transition of the epoxy coating.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.723-732
• /
• 2022

Cracking ammonia inside solid oxide fuel cell (SOFC) stack is a compact and simple way. To prevent sharp temperature fluctuation and increase cell efficiency, the decomposition reaction should be spread on whole cell area. This leading to a question that, how does anode thickness affect the conversion rate of ammonia and the cell voltage? Since the 0D model of SOFC is useful for system level simulation, how accurate is it to use equilibrium solver for internal ammonia cracking reaction? The 1D model of ammonia fed SOFC was used to simulate the diffusion and reaction of ammonia inside the anode electrode, then the partial pressure of hydrogen and steam at triple phase boundary was used for cell voltage calculation. The result shows that, the ammonia conversion rate increases and reaches saturated value as anode thickness increase, and the saturated thickness is bigger for lower operating temperature. The similar cell voltage between 1D and 0D models can be reached with NH₃ conversion rate above 90%. The 0D model and 1D model of SOFC showed similar conversion rate at temperature over 750℃.

• Applied Biological Chemistry
• /
• 제46권1호
• /
• pp.23-27
• /
• 2003

Lipoxygenase는 녹차의 전체적인 품질에 영향을 미치는 "신선하고 풋풋한 풀 향기(green odor)" 향기특성을 가지는 $C_6-alcoho$과 $C_6-aldehyde$ 등 $C_6$화합물을 생성시키는데 관여하는 효소로서 잘 알려져 있다. 본 연구에서는 녹차잎의 초기 성장기간인 4뭘 4에서 15일까지 12일 동안에 매일 채엽한 녹차잎의 lipoxygenase 활성을 측정하고, 이에 따른 $C_6$화합물 및 terpene 등 휘발성 향기성분을 분석하여 수확 날짜에 따른 효소 활성과 녹차잎의 중요한 휘발성 향기성분의 변화를 살펴보았다. 효소활성의 측정은 linoleic acid를 기질로 한 흡광도 측정방법을 사용하였고, 휘발성 향기성분은 Solid Phase MicroExtraction (SPME) 방법으로 휘발성 향기성분을 포집한 후에 GC또는 GC-MS를 이용해 분석하였다. 실험 결과, 초기 녹차 잎 성장기간 동안 lipoxygenase 활성과 $C_6$화합물의 함량은 서로 비례하여 증가 또는 감소하였고, 이러한 변화는 당일의 온도변화와 밀접한 관계가 있는 것으로 나타났다. 즉, 온도가 증가함에 따라서 향기성분의 양도 증가하였으며, 너무 이른 시기에 채엽한 시료는 향기 성분이 매우 적은 것으로 나타났다. 본 연구로부터 "신선한 풀향기"와 "향긋한 꽃향기 (floral)" 등 녹차향 품질에 중요한 영향을 미치는 향 화합물들이 녹차의 초기 채엽기간 중에 어떻게 변화하는지에 대해서 확인 할 수 있었으며, 향기품질이 우수한 녹차를 제조하기 위해서는 생엽 성장 기간동안의 향기성분변화를 이해하는 것이 중요하다는 것을 확인하였다.

• 한국대기환경학회지
• /
• 제31권6호
• /
• pp.548-561
• /
• 2015

Atmospheric concentrations of polychlorinated dibezo-p-dioxins and furans (PCDD/Fs) were investigated at urban-residential (Group I: Suwon, Guri and Goyang), industrial (Group II: Ansan, Siheung and Bucheon), urban-rural mixed (Group III: Yangju, Pocheon and Dongducheon) and rural regions (Group IV: Yangpyeong) in Gyeonggi-do from February 2012 to November 2012 quarterly. The concentrations of PCDD/Fs ranged from 0.018 to $0.109pgTEQm^{-3}$ in Group I (mean value: $0.061pgTEQm^{-3}$), 0.059 to $0.367pgTEQm^{-3}$ in Group II (mean value: $0.179pgTEQm^{-3}$), 0.072 to $0.836pgTEQm^{-3}$ in Group III (mean value: $0.334pgTEQm^{-3}$) and 0.014 to $0.066pgTEQm^{-3}$ in Group IV (mean value: $0.034pgTEQm^{-3}$), respectively. In spite of the less PCDD/F emission sources than Group II (industrial regions), the level of PCDD/Fs in urban-rural mixed area showed the highest values with high fluctuation. It's likely that the Group III was affected by fugitive emissions such like biomass burning and unregulated open burning. The mean contribution of particle phase to total PCDD/F concentration was above 83% because most of PCDD/F congeners were partitioned into particle phase. We evaluated their gas-to-particles equilibriums with the regression between the particle-gas partition coefficient, $K_P(m^3{\mu}g^{-1})$ and corresponding subcooled liquid vapor pressure ($P_L$). The logarithm-$K_P$ of PCDD/Fs was poorly correlated with $P_L$ at low ambient temperature (below $10^{\circ}C$) and the slope (m) values for log-log plots of the $K_P$ vs. $P_L$ was steeper in the Group 2 and Group 3 than residential area. It implies that the slope values were likely influenced by both the direct emission source of PCDD/Fs and ambient temperature.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 제33회 펄프종이기술 국제세미나
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)