• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.416-420
• /
• 2002

Various products of karanj (Pongamia glabra) are utilized for industrial, health and animal agriculture applications in the Indian subcontinent. Despite a rich source of protein (CP, 28-34%), karanj cake was found to be slightly bitter in taste and toxic owing to the presence of flavonoid (Karanjin), restricting its safe inclusion in the livestock diets. Feeding trials with raw cake revealed its poor palatability and adverse performance among different categories of livestock including poultry. The present study was, therefore, aimed to detoxify karanj cake by various physico-chemical methods like solvent extraction, water washing, pressure cooking and alkali and acid treatments. The level of residual karanjin in raw and variously processed cake was quantified using high performance liquid chromatography (HPLC). The raw expeller karanj cake was found to contain about 0.19% of karanjin. Though a non-polar solvent, soxhlet extraction of expeller pressed cake with petroleum ether drastically reduced karanjin content (0.01%). Soaking of cake for 24 h in 1% NaOH (w/w) solution was found to reduce karanjin to a major extent with little further benefit by increasing alkali level. Milder alkalies like lime and fertilizer grade urea reduced the karanjin levels marginally. Similar was the case with mineral acids such as HCl and glacial acetic acid. It was, therefore, concluded that solvent extraction of karanj seeds would be the best method of detoxification as well as for more recovery of oil and karanjin.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.1
• /
• pp.21-29
• /
• 2010

The phenolic compounds are a major contaminant class often found in industrial wastewaters and the biological treatment is an alternative tool commonly employed for their removal. In this sense, monitoring microbial community dynamics is crucial for a successful wastewater treatment. This work aimed to monitor the structure and activity of the bacterial community during the operation of a laboratory-scale continuous submerged membrane bioreactor (SMBR), using PCR and RT-PCR followed by denaturing gradient gel electrophoresis (DGGE) and 16S rRNA libraries. Multivariate analyses carried out using DGGE profiles showed significant changes in the total and metabolically active dominant community members during the 4-week treatment period, explained mainly by phenol and ammonium input. Gene libraries were assembled using 16S rDNA and 16S rRNA PCR products from the fourth week of treatment. Sequencing and phylogenetic analyses of clones from the 16S rDNA library revealed a high diversity of taxa for the total bacterial community, with predominance of Thauera genus (ca. 50%). On the other hand, a lower diversity was found for metabolically active bacteria, which were mostly represented by members of Betaproteobacteria (Thauera and Comamonas), suggesting that these groups have a relevant role in the phenol degradation during the final phase of the SMBR operation.

• Journal of the Korean Society of Systems Engineering
• /
• v.10 no.1
• /
• pp.1-15
• /
• 2014

Refinery plant producing petroleum products from crude oil has significantly contributed to the creation of the national interests as a leading engineering industries. However, domestic Engineering Procurement Construction (EPC) companies are facing heavy competition for orders. Domestic EPC companies as EPC contractors are faced with some problems such as undertaking responsibility for FEED packages produced by other FEED companies. But domestic EPC contractors are unfamiliar to development and validation of FEED packages. It causes poor profitability and lower competitiveness of domestic companies. It is necessary for domestic companies to have capability to perform FEED activities in order to overcome these limitations instead of focusing on EPC phase after FEED phase. The systematic procedure is needed to perform the FEED activities, however, there are present difficulties on it due to the lack of experience in FEED packages development which require various engineering knowledge of chemical process, mechanics, electrics, instrumentation, civil engineering. This study has applied systems engineering method which is multi-disciplinary approach to derive and verify the solution to meet the customer's needs when the complex system is developed to task execution process development of FEED activities for refinery plant. The problems that may occur in the future were identified in advance by taking into account the various stakeholders and system context through the application of systems engineering. It helps to develop the task execution process systematically. The developed task execution process of FEED activities is planned to make effectiveness verified by engineering professionals experienced in FEED and continually enhance this process by field application.

• Journal of Korea Fair Competition Federation
• /
• no.113
• /
• pp.15-31
• /
• 2005

최근 미국의 법원은 담합을 입증하려는 시도를 주로 경제적 증거에 입각하여 분석하는 추세를 보여 왔다. 하지만 담합의 존재를 입증하는데 있어서 경제분석의 역할에도 많은 이견이 날카롭게 표출되었다. 담합의 존재에 관한 경제적 증거를 분석하는 데에 있어 유일한 합리적 근거는 최신과점이론(Modern oligopoly theory)이다. 그런데 증인으로 나선 많은 경제학자들과 법원이 최신과점이론에 자신들의 분석을 뚜렷이 기초하지 않았기 때문에, 판례법의 현 상태가 불만족스럽다고 주장하는 것이 본 논문의 핵심적 내용이다. 셔먼법 제1조는 ''계약, 결합, 공모(contract, combination, or conspiracy)에 의해 초래되는 거래(즉 경쟁)의 불합리한 제한을 규제''하는데, 이러한 계약 결합, 공모의''용어들은 합의라는 하나의 개념으로 통합하여 이해''할 수 있다. 제 1조는 다수의 당사자가 ''단일한 목적, 공통된 의도와 의견의 일치, 혹은 의사의 합치(Meeting of minds)'', 즉 ''공통된 계획에 대한 의식적 참가(consious commitment to a common scheme)''를 합의한 모든 협약을 규제한다. 셔먼법 제 1조 위반을 입증하기 위해서는 일치된 행동이 합의 하에서 일어났음을 입증해야 한다. 미국 법원은 합의를 추론할 수 있는 증거력 있는 정황증거(admissible circumstantial evidence)의 원칙을 확립하였다. 독점가격에 가까운 수준의 과점가격 설정은 ''조정되었다(coordinated)''라고 칭해지는데, 이는 ''구두 합의''와 ''암묵적 합의''의 두 가지 형태로 나뉜다. 한편, 일회게임 과점 모형과 반복게임 모형은 과점이론의 핵심을 이룬다. 과점에 대한 Chamberlin의 견해는 본래 게임과 Stigler의 모형은 그와 같은 생각의 오류를 가르쳤다. 그러나 판례법은, Petroleum products antitrust litigation사건과 reserve supply사건에서 볼 수 있듯이 종종 그러한 교훈을 망각했다. 최신과정이론과 판례를 종합해 보면, 합의의 존재에 관해 경제학자가 이끌어내는 추론과 법원이 이끌어내는 추론을 포괄하는 다음의 네 가지 일반적 원칙이 도출된다. 1. 합의가 추론되기 위해서는 상호의존성을 넘는 무언가가 먼저 제시되어야 한다. 2. 합의의 존재는 일회게임 과점 모형에서의 비협조적 내쉬균형과 일치하는 행동으로부터는 추론될 수 없다. 3. 합의의 존재는, 비록 무한반복 과점게임에서의 비협조적 내쉬균형(혹은 Chamberlin-Fellner식의 과점)과 일치하더라도, 일회게임 과점 모형에서의 비협조적 내쉬균형과 일치하지 않는 행동으로부터 추론될 수 있다. 4. 증거는 구두합의의 존재를 뒷받침해야만 한다. 이러한 원칙에서 얻을 수 있는 가장 중요한 교훈은, 합의가 존재하지 않을 경우 과점상황으로부터는 독점가격이 예상될 수 없다는 사실을 법원이 인식하는 것만으로도 합의의 추론에서 범하기 쉬운 가장 큰 오류를 회피할 수 있다는 것이다.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.468-473
• /
• 2018

In this study, the reforming reaction of vacuum residues (VR), high viscosity oil residues produced from vacuum distillation process of petroleum oil, was carried out using catalytic aquathermolysis reaction. VR showed a prone to decrease the amount of resins and asphaltenes in the constituents, and to increase saturates and aromatics when reacting with steam at 30 bar and above $300^{\circ}C$ for 24 h. When the amount of steam is not enough at this reaction, the asphaltene content in the products was rather increased after the reaction. As a result of the catalytic aquathermolysis using the metal oxide-zeolite catalyst with the decaline as a hydrogen donor, a 10% decrease in resin and asphaltene as well as a 10% increase in the aromatic hydrocarbon were observed. Consequently, the viscosity of VR decreased by 70% after the reaction. GC-Mass spectroscopy showed that the aquathermolysis of VR resulted in the decomposition of the resins and asphaltens into a low molecular weight material.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.577-583
• /
• 2014

A ship-to-ship (STS) lightering operation takes place in order to transfer cargo (e.g. crude oil or petroleum products) between an ocean-going ship and a service ship alongside it. Instrumental measurements to accurately determine the relative speeds and distances during the approach between the vessels would benefit the operational safety and efficiency. A velocity information GPS (VI-GPS) system, which uses the instantaneous velocity measures from carrier-phase Doppler measurement, has been applied in a field observation onboard a service ship (Aframax tanker) approaching a ship-to-be-lightered (VLCC) in open waters. This article proposes to apply VI-GPS as the input sensor to a guidance and decision-support system aiming to provide accurate velocity information to the officer in charge of an STS operation. A method for precise velocity measurement using VI-GPS was described and the measurement results were compared each other with the results of Voyage Data Recorder (VDR) and VI-GPS that showed the concept of a guidance and decision-support system applying VI-GPS with the field test results during STS operations. Also, it turned out that VI-GPS has sufficient accuracy to serve as an input sensor from the field test results.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.533-536
• /
• 2009

The gasification technology is a very flexible and versatile technology to produce a wide variety products such as electricity, steam, hydrogen, Fisher-Tropsch(FT) diesels, Dimethyl Ether(DME), methanol and SNG(Synthetic Natural Gas) with near-zero pollutant emissions. Gasification converts coal and other low-grade feedstocks such as biomass, wastes, residual oil, petroleum coke, etc. to a very clean and usable syngas. Syngas is produced from gasifier including CO, $H_2$, $CO_2$, $N_2$, particulates and smaller quantities of $CH_4$, $NH_3$, $H_2S$, COS and etc. After removing pollutants, syngas can be variously used in energy and environment fields. The pilot-scale coal gasification system has been operated since 1994 at Ajou University in Suwon, Korea. The pilot-scale gasification facility consists of the coal gasifier, the hot gas filtering system, and the acid gas removal (AGR) system. The acid gas such as $H_2S$ and COS is removed in the AGR system before generating electricity by gas engine and producing chemicals like Di-methyl Ether(DME) in the catalytic reactor. The designed operation temperature and pressure of the $H_2S$ removal system are below $50^{\circ}C$ and 8 kg/$cm^2$. The iron chelate solution is used as an absorbent. $H_2S$ is removed below 0.1 ppm in the H2S removal system.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.105-115
• /
• 2017

PURPOSES : The occurrence of unexpected disasters, including fire events, increases as the road network becomes complicated and traffic volume increases. When a fire event occurs on and under bridges, the damage extensively influences direct damage to structures, vehicles, and human life and secondary socioeconomic issues owing to traffic blockage. This study investigated potential fire-hazard risks on bridges of the Korean national route road. METHODS : The investigation was conducted using field investigation and analysis with satellite pictures and road views from commercial websites and the Bridge Management System (BMS). From the filed investigation, various potential fire resources were identified. The satellite pictures and road views were helpful in measuring and recognizing conditions underneath bridges, stowage areas, etc. RESULTS : There are various potential fire resources underneath bridges such as piled agricultural products, parked petroleum tanks, construction equipment, and attached high-voltage cables. A total of 94.6% of bridges have underneath clearances of less than 15 m. A bridge underneath volume that can stow a potential fire hazard resource was $7,332m^3$ on average, and most bridges have about $4,000m^3$ of space. Based on the BMS data, the amounts of PSC and steel girders were 29% and 25%, respectively. CONCLUSIONS : It was found that the amount of stowed potential fire hazard resources was proportional to the underneath space of bridges. Most bridges have less than 15 m of vertical clearance that can be considered as a critical value for a bridge fire. The fire risk investigation results should be helpful for developing bridge fire-protection tools.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.443-452
• /
• 1996

Fouling is caused by sedimentation and corrosion of polymer, heavy paraffine, chemicals, heavy organics, asphaltene, etc. in the entire chemical process of heat exchanger, boiler, desalter, etc. Fouling phenomena remains a serious operating problem which results in increased energy consumption, increased pressure drops, reduction or complete loss of products yield, and increased maintenance costs. In order to calculate the separated amounts of foulants and to control the fouling process, the predictive model is developed which is based on Scott & Magat polymer solution theory, Peng-Robinson EOS, BWR EOS, and continuous and multicomponent thermodynamics.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.13 no.1
• /
• pp.1-9
• /
• 1976

Using the computer programs for calculation of natural vibrations of ship's hull developed by the authors et al., an investigation into influences of various parameters on the accuracy of calculation was done through example calculations of a 30,000 DWT petroleum products carrier M/S Sweet Brier built by Korea Shipbuilding and Engineering Corporation. The methodical principles employed for the computer program development are as follows; (a) the ship system is reduced to an equivalent discrete elements system conforming to Myklestad-Prohl model, (b) the problem formulation is of transfer matrix method, and (c) to obtain solutions an extended $G\ddot{u}mbel's$ initial value method is introduced. The scope of the investigation is influences of number of discrete elements, choice of significant system parameters such as rotary inertia, bending stiffness and shear stiffness, and simplification of distributions of added mass and stiffness as trapezoidal ones referred to those of midship section on the calculation accuracy. From the investigation the followings are found out; (1) To obtain good results for the modes up to the seven-noded thirty or more divisions of the hull is desirable. For fundamental mode fifteen divisions may give fairly good results. (2) The influence of rotary inertia is negligibly small at least for the modes up to the 5- or 6- noded. (3) In the case of assuming either bending modes or shear modes the calculation results in considerably higher frequencies as compared with those based on Timoshenko beam theory. However, the calculation base on the slender beam theory surprisingly gives frequencies within 10% error for fundamental modes. (4) It is proved that to simplify distributions of added mass and stiffness as trapezoidal ones referred to those of midship section is a promising approach for the prediction of natural frequencies at preliminary design stage; provided good accumulation of data from similar type ships, we may expect to obtain natural frequencies within 5% error.