• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.35-41
• /
• 2008

This paper presents the design method of current-mode signal processing for high speed and low power digital audio signal processing. The digital audio processor requires a digital signal processing such as fast Fourier transform (FFT), which has a problem of large power consumption according to the settled point number and high speed operation. Therefore, a current-mode signal processing with a switched Current (SI) circuit was employed to the digital audio signal processing because a limited battery life should be considered for a low power operation. However, current memory that construct a SI circuit has a problem called clock-feedthrough. In this paper, we examine the connection of dummy MOS that is the common solution of clock-feedthrough and are willing to calculate the relation of width between dummy MOS for a proposal of the design methodology for improvement of current memory. As a result of simulation, in case of that the width of memory MOS is 20um, ratio of input current and bias current is 0.3, the relation of width between switch MOS and dummy MOS is $W_{M4}=1.95W_{M3}+1.2$ for the width of switch MOS is 2~5um, it is $W_{M4}=0.92W_{M3}+6.3$ for the width of switch MOS is 5~10um. Then the defined relation of MOS transistors can be a useful design guidance for a high speed low power digital audio processor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.303-321
• /
• 2011

The availability and efficient use of the feed resources in Asia are the primary drivers of performance to maximise productivity from animals. Feed security is fundamental to the management, extent of use, conservation and intensification for productivity enhancement. The awesome reality is that current supplies of animal proteins are inadequate to meet human requirements in the face of rapidly depleting resources: arable land, water, fossil fuels, nitrogenous and other fertilisers, and decreased supplies of cereal grains. The contribution of the ruminant sector lags well behind that of non-ruminant pigs and poultry. It is compelling therefore to shift priority for the development of ruminants (buffaloes, cattle, goats and sheep) in key agro-ecological zones (AEZs), making intensive use of the available biomass from the forage resources, crop residues, agro-industrial by-products (AIBP) and other non-conventional feed resources (NCFR). Definitions are given of successful and failed projects on feed resource use. These were used to analyse 12 case studies, which indicated the value of strong participatory efforts with farmers, empowerment, and the benefits from animals of productivity-enhancing technologies and integrated natural resource management (NRM). However, wider replication and scaling up were inadequate in project formulation, including systems methodologies that promoted technology adoption. There was overwhelming emphasis on component technology applications that were duplicated across countries, often wasteful, the results and relevance of which were not clear. Technology delivery via the traditional model of research-extension linkage was also inadequate, and needs to be expanded to participatory research-extension-farmer linkages to accelerate diffusion of technologies, wider adoption and impacts. Other major limitations concerned with feed resource use are failure to view this issue from a farming systems perspective, strong disciplinary bias, and poor links to real farm situations. It is suggested that improved efficiency in feed resource use and increased productivity from animals in the future needs to be cognisant of nine strategies. These include priorities for feed resource use; promoting intensive use of crop residues; intensification of integrated ruminant-oil palm systems and use of oil palm by-products; priority for urgent, wider technology application, adoption and scaling up; rigorous application of systems methodologies; development of adaptation and mitigation options for the effects of climate change on feed resources; strengthening research-extension-farmer linkages; development of year round feeding systems; and striving for sustainability of integrated farming systems. These strategies together form the challenges for the future.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.400-408
• /
• 2018

Wide area augmentation system is a system that generates and transmits correction and Integrity information for use in wide area. Typical system is SBAS. In the United States, it operates under the name WAAS, EGNOS in Europe, MSAS in Japan, SDCM in Russia, GAGAN in India. it is developing Korean SBAS which named KASS by 2022 in Korea. SBAS is a standard System that is operated as civil aviation service base and set as international standards by ICAO. So the correction data can only is used for civil SPS receiver. In this paper, we discuss C1P1 DCB estimation which need to use SPS correction service for PPS receiver. Then we analyze C1P1 DCB correction effect under standalone Satellite Navigation and method to use PPS receiver under SPS DGPS. Finally we organize wide area augmentation system for PPS receiver and analysis performance.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.3.1-3.1
• /
• 2010

Water splitting reaction using photocatalysts is of great interest in the utilization of solar energy [1]. In the present work, visible light-responsive $TiO_2$ thin films (Vis-$TiO_2$) were prepared by a radio frequency magnetron sputtering (RF-MS) deposition method and applied for the separate evolution of $H_2$ and $O_2$ from water as well as the photofuel cell. Special attentions will be focused on the effect of HF treatment of Vis-$TiO_2$ thin films on their photocatalytic activities. Vis-$TiO_2$ thin films were prepared by an RF-MS method using a calcined $TiO_2$ plate and Ar as the sputtering gas. The Vis-$TiO_2$ thin films were then deposited on the Ti foil substrate with the substrate temperature at 873 K (Vis-$TiO_2$/Ti). Vis-$TiO_2$/Ti thin films were immersed in a 0.045 vol% HF solution at room temperature. The effect of HF treatments on the activity of Vis-$TiO_2$/Ti thin films for the photocatalytic water splitting reaction have been investigated. Vis-$TiO_2$/Ti thin films treated with HF solution (HF-Vis-$TiO_2$/Ti) exhibited remarkable enhancement in the photocatalytic activity for $H_2$ evolution from a methanol aqueous solution as well as in the photoelectrochemical performance under visible light irradiation as compared with the untreated Vis-$TiO_2$/Ti thin films. Moreover, Pt-loaded HF-Vis-$TiO_2$/Ti thin films act as efficient and stable photocatalysts for the separate evolution of $H_2$ and $O_2$ from water under visible light irradiation in the presence of chemical bias. Thus, HF treatment was found to be an effective way to improve the photocatalytic activity of Vis-$TiO_2$/Ti thin films. Furthermore, unique separate type photofuel cell was fabricated using a Vis-$TiO_2$ thin film as an electrode, which can generate electrical power under solar light irradiation by using various kinds of biomass derivatives as fuel. It was found that the introduction of an iodine ($I^-/{I_3}^-$) redox solution at the cathode side enables the development of a highly efficient photofuel cell which can utilize a cost-efficient carbon electrode as an alternative to the Pt cathode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.27-36
• /
• 2019

The demand for a low dispersion lens with a small refractive index and a high refractive index is increasing, and accordingly, there is an increasing need for a releasable protective film with high heat resistance and abrasion resistance. On the other hand, the optical industry has not yet established a clear standard for the manufacturing process and quality standards for mold-releasing protective films used in aspheric glass lens molding. Optical lens manufacturers treat this technology as proprietary information. In this study, an experiment was conducted regarding the optimization of ion etching, magnetron, and arc current at each source and filter part, and bias voltage in FCVA (filtered cathode vacuum arc)-based Ta-C thin film coatings. This study found that compared to iridium-rhenium alloy thin film sputtering products, the coating conditions were improved by approximately 50%, 20%, and 40% in terms of thickness, hardness, and adhesive strength of the film, respectively. The thin-film coating process proposed in this study is expected to contribute significantly to the development and utilization of glass lenses, which will help enhance the minimum mechanical properties and quality of the mold-release thin film layer required for glass mold surface forming technology.

• International Journal of Highway Engineering
• /
• v.5 no.1 s.15
• /
• pp.11-18
• /
• 2003

Road roughness, as the key factor influencing not only drivers' ride quality and safety but also pavement deterioration, is one of the most important pavement performance indicator to be evaluated by users' subjective assessment. For this reason, a specific number of the pavement roughness has been adopted to monitor the condition of a road for pavement management systems and to evaluate the quality of newly constructed sections, however, none of the unified methodology was internationally accepted. In Korea highway network, road roughness has been used mainly to evaluate newly placed pavement by using 7.6m CP (California Profile meter) to calculate PrI (Profile Index). But this instrument is manually operated to measure road profiles by traffic closure and their interpretation depends on personal bias. Therefore, problems arisen from the manually operated instrument will be overcome by using the APL (Longitudinal Profile Analyzer) which can be operated in the speed of 80km per hour. A study was conducted to correlate the relation from both concrete and asphalt pavement between IRI (measured by APL) and PrI (measured by 7.6m CP). Test results showed that there was a good correlation between IRI and PrI.

• Journal of Internet Computing and Services
• /
• v.21 no.5
• /
• pp.1-7
• /
• 2020

Deep neural networks(DNN), which are used as approximation functions in reinforcement learning (RN), theoretically can be attributed to realistic results. In empirical benchmark works, time difference learning (TD) shows better results than Monte-Carlo learning (MC). However, among some previous works show that MC is better than TD when the reward is very rare or delayed. Also, another recent research shows when the information observed by the agent from the environment is partial on complex control works, it indicates that the MC prediction is superior to the TD-based methods. Most of these environments can be regarded as 5-step Q-learning or 20-step Q-learning, where the experiment continues without long roll-outs for alleviating reduce performance degradation. In other words, for networks with a noise, a representative network that is regardless of the controlled roll-outs, it is better to learn MC, which is robust to noisy rewards than TD, or almost identical to MC. These studies provide a break with that TD is better than MC. These recent research results show that the way combining MC and TD is better than the theoretical one. Therefore, in this study, based on the results shown in previous studies, we attempt to exploit a random balance with a mixture of TD and MC in RL without any complicated formulas by rewards used in those studies do. Compared to the DQN using the MC and TD random mixture and the well-known DQN using only the TD-based learning, we demonstrate that a well-performed TD learning are also granted special favor of the mixture of TD and MC through an experiments in OpenAI Gym.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.6
• /
• pp.34-42
• /
• 2002

In this paper, we propose a temperature independent the detective voltage source in voltage detector. The value of a detective voltage source is designed to become m times of silicon bandgap voltage at zero absolute temperature. By properly choosing the temperature coefficient of diode, the temperature coefficient of a concave voltage nonlinearities generated by the ${\Delta}V_{BE}$ section of diode between base and emitter of transistors with a different area can be summed with convex nonlinearities the $V_{BE}$ voltage to achieve the near zero temperature coefficient of the detective voltage source. We designed that the value of a detective voltage can be varied by ${\Delta}V_{BE}$, the $V_{BE}$multiplier circuit and resistor. In order to verify the performance of a proposed detective voltage source, we manufactured the voltage detector IC for 1.9V which is fabricated in $6{\mu}m$ Bipolar technology and measured the operating characteristics, the temperature coefficient of a detective voltage. To reduce the deviation of a detective voltage in the IC process step, we introduced a trimming technology, ion implantation and an isotropic etching. In manufactured IC, the detective voltage source could achieve the stable temperature coefficient of 29ppm/$^{\circ}C$ over the temperature range of -30$^{\circ}C$ to 70$^{\circ}C$. The current consumption of a voltage detector constituted by the proposed detective voltage source is $10{\mu}A$ from 1.9V-supply voltage at room temperature.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.60-68
• /
• 2008

This work describes a re-configurable 10MS/s to 100MS/s, low-power 10b two-step pipeline ADC operating at a power supply from 0.5V to 1.2V. MOS transistors with a low-threshold voltage are employed partially in the input sampling switches and differential pair of the SHA and MDAC for a proper signal swing margin at a 0.5V supply. The integrated adjustable current reference optimizes the static and dynamic performance of amplifiers at 10b accuracy with a wide range of supply voltages. A signal-isolated layout improves the capacitor mismatch of the MDAC while a switched-bias power-reduction technique reduces the power dissipation of comparators in the flash ADCs. The prototype ADC in a 0.13um CMOS process demonstrates the measured DNL and INL within 0.35LSB and 0.49LSB. The ADC with an active die area of $0.98mm^2$ shows a maximum SNDR and SFDR of 56.0dB and 69.6dB, respectively, and a power consumption of 19.2mW at a nominal condition of 0.8V and 60MS/s.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.361-373
• /
• 2002

In this paper, we propose a channel normalization method to improve the performance of CMS (cepstral mean subtraction) which is widely adopted to normalize a channel variation for speech and speaker recognition. CMS which estimates the channel effects by averaging long-term cepstrum has a weak point that the estimated channel is biased by the formants of voiced speech which include a useful speech information. The proposed Formant-broadened Cepstral Mean Subtraction (FBCMS) is based on the facts that the formants can be found easily in log spectrum which is transformed from the cepstrum by fourier transform and the formants correspond to the dominant poles of all-pole model which is usually modeled vocal tract. The FBCMS evaluates only poles to be broadened from the log spectrum without polynomial factorization and makes a formant-broadened cepstrum by broadening the bandwidths of formant poles. We can estimate the channel cepstrum effectively by averaging formant-broadened cepstral coefficients. We performed the experiments to compare FBCMS with CMS, PFCMS using 4 simulated telephone channels. In the experiment of channel estimation, we evaluated the distance cepstrum of real channel from the cepstrum of estimated channel and found that we were able to get the mean cepstrum closer to the channel cepstrum due to an softening the bias of mean cepstrum to speech. In the experiment of text-independent speaker identification, we showed the result that the proposed method was superior than the conventional CMS and comparable to the pole-filtered CMS. Consequently, we showed the proposed method was efficiently able to normalize the channel variation based on the conventional CMS.