• Journal of Biosystems Engineering
• /
• 제28권5호
• /
• pp.421-428
• /
• 2003

This study was conducted to determine the optimum blade shape for peeling Altari radish. To figure out the required peeling force according to various angles of blade and rakes of peeling cutter, two peeling tests such as circumferential peeling and longitudinal peeling of Altari radish were carried out. Based on the pretest results, which performed to investigate the applicability of the optimum shape of cutter and to find out the cutting pattern according to the lapse of days after harvesting the radish, the peeling depth and width of the blade were fixed at 2 mm and 10 mm. From two methods of circumferential and longitudinal peeling test, the angles of rake and blade as cutter shape factors were affected on peeling force. But the peeling speed was not affected on it under the safety speed as 0.2 m/s, without blade vibrating on peeling operation. The rake angle was more effective factor than the blade angle, and the optimum angles of blade and rake were 10$^{\circ}$ and 55$^{\circ}$ respectively. The cutting surface by the longitudinal peeling was more smooth than that by the circumferential peeling. There was no problem in peeling work during 4 days after harvest because the freshness of the Altari radish was maintained.

• Journal of Biosystems Engineering
• /
• 제30권3호
• /
• pp.166-171
• /
• 2005

A prototype peeling device with rotating cutter blades was designed to peel altari radish skin. With the designed blades, the maximum peeling depth increased as the cutter clearance increased but the effect of the peeling speed was not significant. The optimal operating conditions for peeling was; the peeling speed was at 0.19m/s when peeled 2.5 blades/sec and the maximum peeling depth was 1.5mm, the minimum peeling depth was 0.5mm, and the leaf rotating speed was 12 rpm, respectively. In the peeling test fur the optimum operation conditions, with a auxiliary rolling device could adjust the rotational speed of the root uniformly, the altari radishes under 70mm diameter were peeled perfectly.

• Journal of Biosystems Engineering
• /
• 제30권3호
• /
• pp.161-165
• /
• 2005

In this study, peeling test of the Altari radish on kimchi pre-processing system for mechanization was performed with the longitudinal plane peeling type with wider cutting blade than that of the peeled chip's. To determine the optimum cutter shape to match this plane peeling type, the peeling tests depending on variable cutting speed, rake angle and blade angle using the blade with thickness as 2 m and width as 50mm were performed, and the patterns of the peeled chips and peeling resistances were investigated. As the result of the tests, the rake angle of the blade with clean peeled surface of the Altari radish was over $45^{\circ}$, and the blade angle and rake angle with the minimum peeling resistance was $20^{\circ}\;and\;60^{\circ}$, respectively. The optimum peeling conditions were; the peeling speed 0.2m/s, blade angle $20^{\circ}$ and the rake angle $60^{\circ}$, and the peeling resistance of each blade was 15 N.

• Journal of Biosystems Engineering
• /
• 제31권2호
• /
• pp.121-127
• /
• 2006

An Altari radish pre-processing system, which feasible to process automatically such operations as leaf and root tail cutting and root peeling, for kimchi production was accomplished based on the foregone serial studies. In this study, the performances of the developed prototype machine, considered as a commercializing level, were analyzed and evaluated. The prototype machine attached Tiny PLC automatic control system was performed the sequent function as the rate of successful peeling was more than 98% for the Altari radish less than 70 mm diameter of a radish. The operating efficiency of this was 9 see/each, 128 kg/h, and it means as much as $5{\sim}6$ times that of a woman labor's. The sanitation and taste of the mechanized-processed Altari radish kimchi was almost same as that of the handmade. And they were suitable for manufactory of kimchi as the both short term ripening and storing kimchi. Developed machinery with one peeling device and two peeling devices that compared with hand processing, it was analyzed that the break-even yearly working days were 28 days and 19 days, and the break-even yearly processing amount were 28,700 kg, 32,400 kg, respectively.

• Journal of Biosystems Engineering
• /
• 제31권5호
• /
• pp.403-409
• /
• 2006

This study was performed to design a peeling device for root crop that were considered of the three possible types such as blade belt type, brush type, and rotating blade type, and to inspect the characteristics of the experimented peeling methods based on the chonggag (altari) radish tests. The peeling performances by the blade belt type and brush type devices were not established so well with the troublesome like adhesion of the chip on the blades was occurred, and the difficulties to produce the blade parts were come out on these types of the peeling devices. But the peeling operations by the rotating blade type peeling device was completed without needs to clean blades, and it was concluded that it would be possible to practical mechanization of the root crop which shaped similar chonggag radish for it's constructional simplicity and feasibility.

• Journal of Biosystems Engineering
• /
• 제29권1호
• /
• pp.29-36
• /
• 2004

The geometric characteristics of the Altari radish were measured for the purpose of mechanization of the kimchi processing. In this study, geometric characteristics such as the sectional area and volume of the radishes(pyeong-gang and sa-chul) were calculated using the image processing method, and physical properties such as the compressive strength, the cutting force of the radish and the torsional moment of the radish leaf-stems were measured by using a universal testing machine. In case of the radish(pyeong-gang), the weight was ranged 215.0∼465.0 g, the length of the radishes(body) was 86.3∼129.2 mm, the diameters were 43.3∼58.1 mm, and the length of the leaves was 261.3-368.2 mm. And the vertical compressive strengths were ranged 83.8∼171.7 N/$\textrm{cm}^2$, the horizontal compressive strengths were 113.0∼176.3 N/$\textrm{cm}^2$, the shearing forces were 86.0∼114.6 N, and the surface hardness was ranged 51.1∼52.1 N/$\textrm{cm}^2$. In case of the radish(sa-chul), the weight was ranged 203.5∼412.2 g, the length of the bodies was 67.5∼127.0 mm, the diameters were 22.3∼59.8 mm and the length of the leaves was 245.6∼312.6 mm respectively. And the vertical compressive strengths were ranged 91.3∼168.3 N/mm, the horizontal compressive strengths were 132.6∼186.9 N/$\textrm{cm}^2$, the shearing forces were 89.4∼116.5 N, and the surface hardness was ranged 52.4∼67.8 N/$\textrm{cm}^2$, respectively.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 동계 학술대회 논문집
• /
• pp.303-308
• /
• 2003

김치는 우리나라 사람 누구나 즐겨 먹는 전통 음식이며, 세계적으로 널리 알려져 있는 우리 고유의 음식 중에 하나이다 우리나라에서 한해 생산되는 무는 1,759,357톤에 이르며(농림부, 2001), 한해 김치 생산량은 155만 톤으로 이중 김치가공공장 생산이 50만톤(33%)으로 그 비중이 매년 상승하는 추세이다. 또한 2001년 김치수출은 23,785톤으로 전년대비 1.5% 증가한 것으로 나타났다(김, 2002), 우리나라에서는 약 60여 개의 김치 가공공장에서 생산되는 알타리무김치의 비중은 약 8.5%로 이를 전체 무 생산량에 적용하면 알타리 김치는 한해 약 42,500톤이 생산되는 것으로 추정되며, 김치 가공을 대부분 인력에 의지하고 있다(민 등, 2001). (중략)