• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.679-686
• /
• 2006

The positions of $PbI _2$ molecule synthesized into the molecular-dimensioned cavities of $\mid K_6 (Pb _4I_2)(PbI_2) _{0.67}-(H_2O)_2\mid [Si _{12}Al _{12}O _{48}]$-LTA have been determined. A single crystal of $\mid Pb _6\mid [Si _{12}Al _{12}O _{48}]$-LTA, prepared by the dynamic ion-exchange of $\mid Na _{12}\mid [Si _{12}Al _{12}O _{48}]$-LTA with aqueous 0.05 M $Pb _(NO _3)_2$ and washed with deionized water, was placed in a stream of flowing aqueous 0.05 M KI at 294 K for three days. The resulting crystal structure of the product $( \mid K_6 (Pb _4I_2)(PbI_2) _{0.67}(H_2O)_2\mid [Si _{12}Al _{12}O _{48}]$-LTA, a = 12.353(1) $\AA$) was determined at 294 K by single-crystal X-ray diffraction in the space group Pm3 m. It was refined with all measured reflections to the final error index $R_1$ = 0.062 for 623 reflections which $F_o$ > 4$\sigma$($F_o$). 4.67 $Pb ^{2+}$ and six $K^+$ ions per unit cell are found at three crystallographically distinct positions: 3.67 $Pb ^{2+}$ and three $K^+$ ions on the 3-fold axes opposite six-rings in the large cavity, three $K^+$ ions off the plane of the eight-rings, and the remaining one $Pb ^{2+}$ ion lies opposite four-ring in the large cavity. 0.67 $Pb ^{2+}$ ions and 1.34 $I^-$ ions per unit cell are found in the sodalite units, indicating the formation of a $PbI _2$ molecule in 67% of the sodalite units. Each $PbI _2$ (Pb-I = 3.392(7) $\AA$) is held in place by the coordination of its one $Pb ^{2+}$ ion to the zeolite framework (a $Pb ^{2+}$ cation is 0.74 $\AA$ from a six-ring oxygens) and by the coordination of its two $I^-$ ions to $K^+$ ions through six-rings (I-K = 3.63(4) $\AA$). Two additional $I^-$ ions per unit cell are found opposite a four-ring in the large cavity and form $Pb _2K_2I^{5+}$ and $Pb _2K_2I^{3+}$ moieties, respectively, and two water molecules per unit cell are also found on the 3-fold axes in the large cavity.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.315-320
• /
• 2020

Methylammonium lead iodide (MAPbI₃) thin films were grown at low temperatures on glass substrates via 3-zone chemical vapor deposition. Lead iodide (PbI₂) and lead bis (dipivaloylmethanate) [Pb(dpm)₂] precursors were used as lead sources. Due to the high sublimation temperature (~400℃) of the PbI₂ precursor, a low substrate temperature could not be constantly maintained. Therefore, MAPbI₃ thin films degraded into the PbI₂ phase. In contrast, for the Pb(dpm)₂ precursor, a substrate temperature of ~120℃ was maintained because the sublimation temperature of Pb(dpm)₂ is as low as 130℃ at a high vapor pressure. As a result, high-quality MAPbI₃ thin films were successfully grown on glass substrates using Pb(dpm)₂. The rms (root-mean-square) roughness of MAPbI₃ thin films formed from Pb(dpm)₂ was as low as ~19.2 nm, while it was ~22.7 nm for those formed using PbI₂. The grain size of the films formed from Pb(dpm)₂ was as large as approximately 350 nm.

• 한국방사선학회논문지
• /
• 제17권3호
• /
• pp.433-440
• /
• 2023

High dose rate brachytherapy은 선량률이 높은 동위원소를 체내에 넣어 종양에 방사선을 집중적으로 조사하는 암 치료법이다. 이러한 치료를 위해서는 정확한 치료 계획을 통하여 종양 조직에는 적확한 선량을 조사하면서도 정상조직에는 최소한의 선량만을 전달될 수 있도록 하여야 한다. 그래서 임상에서는 정확한 품질보증(QA)을 통해 선원의 위치정확성을 확인하는 것이 매우 중요하다. 하지만 임상에서 소스 위치는 눈금자, 자동 방사선 사진기, 비디오 모니터 등을 사용하여 결정되므로 부정확한 결과를 산출한다. 이에 본 연구에서는 CsPbI₂Br과 CsPbIBr₂를 활용한 새로운 반도체 선량계를 제작하였다. 그리고 두 물질 중에 근접방사선치료기용 relative QA에 측정에 적합한지 분석하고자 각각의 방사선 검출 능력을 비교 평가하였다. 근접방사선치료에서의 방사선 검출 능력 평가하기 위하여 ¹⁹²IR에서 두 물질의 재현성, 선형성을 평가하였다. 재현성 평가에서 CsPbI₂Br는 relative standard deviation(RSD) 0.98%로 제시되었고 CsPbIBr₂는 RSD 3.45%로 제시되었다. 선형성 평가에서는 CsPbI₂Br의 결정계수(coefficient of determination, R²)가 0.9998로 제시되었으며, CsPbIBr₂의 R²은 0.9994로 제시되었다. 평가결과, 본 실험에서 제작된 선량계에서 평가 기준을 만족하면서도 방사선 검출이 더 안정적인 것은 CsPbI₂Br로 나타났다. 따라서, CsPbI₂Br 물질이 근접방사선치료 장치의 방사선 검출을 위한 상대 선량계로 적용하기에 적합하다.

• Electronic Materials Letters
• /
• 제14권6호
• /
• pp.700-711
• /
• 2018

CdS synthesized by the chemical bath method at $70^{\circ}C$, has been used as an electron transport layer in the planar structure of the perovskite solar cells. A two-step spin process produced a mixed halide perovskite of $CH_3NH_3PbI_{3-x}Cl_x$ and a mixture of $PbCl_2$ and $PbI_2$ was deposited on CdS, followed by a sub-sequential reaction with MAI ($CH_3NH_3I$). The added $PbCl_2$ to $PbI_2$ in the first spin-step affected the structure, orientation, and shape of lead halides, which varied depending on the content of Cl. A small amount of Cl enhanced the surface morphology and the preferred orientation of $PbI_2$, which led to large and uniform grains of perovskite thin films. In contrast, the high content of Cl produces a new phase PbICl in addition to $PbI_2$, which leads to the small and highly uniform grains of perovskites. An improved surface coverage of perovskite films with the large and uniform grains maximized the performance of perovskite solar cells at 0.1 molar ratio of $PbCl_2$ to $PbI_2$. The depth profiling of elements in both lead halide films and mixed halide perovskite films were measured by Rutherford backscattering spectroscopy, revealing the distribution of chlorine along with the thickness, and providing the basis for the mechanism for enhanced preferred orientation of lead halide and the microstructure of perovskites.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.146-146
• /
• 2009

최근에 광도전체와 형광체를 기반으로 평판형 디지털 방사선 검출기의 상업적 발전가능성에 많은 관심을 가지고 있다. 본 연구는 기존의 직접변환방식에 널리 사용되었던 비정질 셀레늄 (amorphous selenium) 기반의 디지털 방사선 검출기보다 높은 전기적신호 및 동작특성을 가지는 물질층을 제작하기 위해 High Purity (99.99%)의 상용화된 $PbI_2$를 특수용매에 담가두었다가 약 1시간동안 Biology 초음파 처리한 후 농축기를 사용하여 건조된 $PbI_2$를 3Roll-milling을 사용하여 미세크기의 Powder를 얻어내었다. 합성된 $PbI_2$ Powder를 PIB(Particle-in-Binder)법을 이용하여 전도성을 가진 ITO(Indium-tin-oxide)코팅된 유리판에 제작된 필름의 상부에 Magnetron sputtering system 을 사용하여 전극을 $1cm{\times}1cm$의 크기로 증착하였다. I-V 테스트를 통하여 X선 조사시 $PbI_2$필름의 Sensitivity, Dark current, SNR(signal-to-noise ratio)을 측정하여 필름의 전기적 검출 특성을 정량적으로 평가하였고 SEM(scanning electron microscope)을 통하여 입자의 크기를 관찰하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.130-131
• /
• 1993

• Current Photovoltaic Research
• /
• 제10권4호
• /
• pp.101-106
• /
• 2022

We prepared a CsPbI₂Br solution using Cesium iodide (CsI), Lead (II) bromide (PbBr₂) and Lead (II) iodide (PbI₂) materials into a polar solvent mixture of N,N-dimethylformamide (DMF) and Dimethyl sulfoxide (DMSO). A simple spin coating technique was used for the fabrication of CsPbI₂Br absorber layer in the solution process. In order to prepare uniform coating of absorber film we adopted a hot-air process in assocation with the spin coating. It was confirmed that the thin film manufactured by the hot-air process had a higher absorption rate than that without it, and the optical band gap was measured 1.93 eV. The thin film of absorber was uniformly prepared and revealed the Black α-Cubic crystal phase as proved through X-ray diffraction analysis. Finally, a perovskite solar cell having an n-i-p structure was manufactured with a CsPbI₂Br perovskite absorption layer. From the solar cell, we obtained a power conversion efficiency (PCE) of 5.97% in a forward measurement.

• Rapid Communication in Photoscience
• /
• 제4권4호
• /
• pp.79-81
• /
• 2015

The influence of the grain size of the $CH_3NH_3PbI_3$ on the solar cell performance is investigated by controlling the ratio between $CH_3NH_3I$ and $PbI_2$ precursors. As the concentration of the precursors increased from 1.0M to 2.0M, the $CH_3NH_3PbI_3$ grain size increased from ~100nm to ~400nm. The solar cell utilizing the $CH_3NH_3PbI_3$ with large grain size shows improved photocurrent compared to the solar cell utilizing $CH_3NH_3PbI_3$ with small grain size, which is ascribed to the reduced recombination at the boundaries of grains.

• E2M - 전기 전자와 첨단 소재
• /
• 제6권3호
• /
• pp.207-213
• /
• 1993

Pb(Z $r_{0.54}$, $Ti_{0.46}$) $O_{3}$에 B $i_{2}$ $O_{3}$를 0.0wt%까지 첨가하여 미세구조, 유전, 압전, 성질에 미치는 영향을 고찰하였다. B $i_{2}$ $O_{3}$의 고용범위는 약 0.5~0.7wt%정도 이었고 B $i_{2}$ $O_{3}$ 첨가량이 증가함에 따라서 결정립의 크기가 감소하였다. B $i_{2}$ $O_{3}$첨가량이 증가함에 따라 고용한계까지는 $d_{33}$ , tan .delta., .xi.$_{r}$(분극후)값이 증가하였으며 Qm값과 밀도는 감소하였다. $K_{p}$ 값은 B $i^{3+}$ 가 P $b^{2+}$를 치환하므로 형성되는 Pb공공의 형성에 의해 자발분극이 증가됨에 따라 증가하였다.다.

• Current Photovoltaic Research
• /
• 제6권1호
• /
• pp.12-16
• /
• 2018

The interest in perovskite solar cells has been skyrocketed owing to their rapid progress in efficiency in recent years. Here, we report the effect of non-stoichiometry in the methylammonium lead trihalide ($MAPbI_3$) precursors used in a solution process with different MAI : $PbI_2$ ratios of 1 : 0.96, 1 : 1.10, 1 : 1.15, and 1:1.20. With an increase in the $PbI_2$ content, the $PbI_2$ secondary phase was found to form at grain boundary region of perovskite thin films, as evidenced by X-ray diffraction (XRD) and scanning electron microscopy (SEM). In terms of device performance, open-circuit voltage in particular is significantly improved with increasing the molar ratio of $PbI_2$, which is possibly ascribed to the reduction in recombination sites at grain boundary of perovskite and hence the prolonged life time of light-generated carriers according to the reported. As a result, the $PbI_2-excess$ devices exhibited a higher power conversion efficiency compared to the MAI-excess ones.