• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2303-2308
• /
• 2009

A thiocyanate poly(vinyl chloride) (PVC) membrane electrode based on [1,2-bis(diphenylphosphino)ethane]dihalopalladium( II), [(dppe)$PdX_2$, X = Cl ($L^1$), X = I ($L^2$)] as active sensor has been developed. The diiodopalladium complex, [(dppe)$PdI_2](L^2$) displays an anti-Hofmeister selectivity sequence: $SCN^-\;>\;I^-\;>\;{ClO_4}^-\;>\;Sal^-\;>\;Br^-\;>\;{NO_2}^-\;>\;{HPO_4}^-\;>\;AcO^-\;>\;{NO_3}^-\;>\;{H_2PO_4}^-\;>\;{CO_3}^{2-}$. The electrode exhibits a Nernstian response (-59.8 mV/decade) over a wide linear concentration range of thiocyanate ($(1.0\;{\times}\;10^{-1}\;to\;5.0\;{\times}\;10^{-6}$ M), low detection limit ($(1.1\;{\times}\;10^{-6}$ M), fast response $(t_{90%}$ = 24 s), and applicability over a wide pH range (3.5∼11). Addition of anionic sites, potassium tetrakis[p-chlorophenyl] borate (KTpClPB) is shown to improve potentiometric anion selectivity, suggesting that the palladium complex may operate as a partially charged carrier-type ionophore within the polymer membrane phase. The reaction mechanism is discussed with respect to UV-Vis and IR spectroscopy. Application of the electrode to the potentiometric titration of thiocyanate ion with silver nitrate is reported.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.4
• /
• pp.303-310
• /
• 2000

This study is conducted in order to find more improved solidifying effects than the former converter slag solidification technology. The converter slag is used as a solidifying agent, and the quick lime and the gypsum are used as solidifying aids. Several tests are performed for the purpose of investigating the solidifying effects and the applicability of the solidified sludge as a daily or intermediate landfill cover. The unconfined uniaxial compressive strength, pH and leaching of heavy metal are investigated. In the case of using both quick lime and gypsum as solidifying aids, the compressive strength of specimen has significantly increased that of specimen which used quick lime only. The compressive strength of each specimen cured for 7 days which is mixed with quick lime and gypsum as mixing ratios 7:1, 5:1 and 3:1 are $0.59kg/cm^2$, $1.18kg/cm^2$, and $1.25kg/cm^2$, respectively. The results of all the leaching tests of specimen cured for 7 days show that the concentrations of leachate heavy metals(Cu, Pb, Cd and $Cr^{6+}$) are lower than the Korea toxic waste criteria. The microstructure analysis by SEM shows that needlelike crystals appear as the solidification proceed. The analysis of these crystals by EDS confirms that these main components are Ca. Si etc. Also, XRD analysis shows that the main solidification products are CSH and Ettringite; in addition, $Ca(OH)_2$ CAH are observed. When the added gypsum is used as a solidifying aid, more improved solidifying effects are obtained and the solidified sludge may be appropriately used as a daily or intermediate landfill cover.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.6
• /
• pp.451-457
• /
• 2016

Background: Leonurine is a the aerial part of Leonurus japonicus Houttuyn, which has been used as a traditional medicines and is registered in the Korean Pharmacopoeia. Methods and Results: In the present study we performed a heavy metals and thin layer chromatography and measured loss on drying, as well as the contents of total ash, acid-insoluble ash, ethanol soluble compounds, and leonurine, using 15 domestically collected L. japonicus samples. The methods were performed according to the 'crude drugs test of the general test, processes and apparatus', published by MFDS, Korea (2014). The purity test (heavy metals) indicated that levels of Pb and Hg were 0.35 - 3.64, and 0.001 ppm, respectively, whereas the levels of As and Cd were undetectable, and stachydrine was identified by thin layer chromatography ($R_f$ : 0.15). We found that 5.93 - 10.62% (average: $8.58{\pm}1.8%$) of the sample mass was lost during drying, and the contents of total ash, acid-insoluble ash, ethanol soluble compounds, and leonurine were 7.87 - 10.84% (average: $9.62{\pm}0.82%$), 0.99 - 1.76% (average: $1.38{\pm}0.24%$), 16.70 - 23.11% (average: $19.49{\pm}2.14%$) and 0.04 - 0.17% (average: $0.11{\pm}0.04%$) respectively. In addition, HPLC profiling detected leonurine (5.94 min), rutin (16.43 min) and myricetin (26.78 min). Conclusions: We hope that this the rusult of the present study will contribute to the standardization and quality control of Korean herbal medicines.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.90-94
• /
• 2016

In this work, [$Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_x(Zr_{0.5}Ti_{0.5})_{0.97-x}O_3-BiFeO_3$] (x=0.02 to 0.12) composition ceramics were fabricated by the conventional soild state reaction method and their microstructure and piezoelectric properties were investigated according to PNN substitution. The addition of small amount of $BiFeO_3$, $Li_2CO_3$, and $CaCO_3$ were used in order to decrease the sintering temperature of the ceramics. The XRD (x-ray diffraction patterns) of all ceramics exhibited a perovskite structure. The sinterability of PMW-PNN-PZT-BF ceramics was remarkably improved using liquid phase sintering of $CaCO_3$, $Li_2CO_3$. However, it was identified from of the X-ray diffraction patterns that the secondary phase formed in grain boundaries decreased the piezoelectric properties. According to the substitution of PNN, the crystal structure of ceramics is transformed gradually from a tetragonal to rhombohedral phase. The x=0.10 mol PNN-substituted PMW-PNN-PZT-BF ceramics sintered at $920^{\circ}C$ showed the optimum values of piezoelectric constant($d_{33}$), piezoelectric figure of merit($d_{33{\cdot}}g_{33}$), planar piezoelectric coupling coefficient($k_p$) and density : $d_{33}=566$ [pC/N], $g_{33}=29.28[10^{-3}mV/N]$, $d_{33{\cdot}}g_{33}=16.57[pm^2/N]$, $k_p=0.61$, density=7.82 [$g/cm^3$], suitable for duplex ultrasonic sensor application.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.3
• /
• pp.331-338
• /
• 2012

A novel gene coding for an endo-${\beta}$-1,4-mannanase (manA) from Bacillus subtilis strain G1 was cloned and overexpressed in P. pastoris GS115, and the enzyme was purified and characterized. The manA gene consisted of an open reading frame of 1,092 nucleotides, encoding a 364-aa protein, with a predicted molecular mass of 41 kDa. The ${\beta}$-mannanase showed an identity of 90.2-92.9% ${\leq}95%$) with the corresponding amino acid sequences from B. subtilis strains deposited in GenBank. The purified ${\beta}$-mannanase was a monomeric protein on SDS-PAGE with a specific activity of 2,718 U/mg and identified by MALDI-TOF mass spectrometry. The recombinant ${\beta}$-mannanase had an optimum temperature of $45^{\circ}C$ and optimum pH of 6.5. The enzyme was stable at temperatures up to $50^{\circ}C$ (for 8 h) and in the pH range of 5-9. EDTA and most tested metal ions showed a slightly to an obviously inhibitory effect on enzyme activity, whereas metal ions ($Hg^{2+}$, $Pb^{2+}$, and $Co^{2+}$) substantially inhibited the recombinant ${\beta}$-mannanase. The chemical additives including detergents (Triton X-100, Tween 20, and SDS) and organic solvents (methanol, ethanol, n-butanol, and acetone) decreased the enzyme activity, and especially no enzyme activity was observed by addition of SDS at the concentrations of 0.25-1.0% (w/v) or n-butanol at the concentrations of 20-30% (v/v). These results suggested that the ${\beta}$-mannanase expressed in P. pastoris could potentially be used as an additive in the feed for monogastric animals.

• Journal of Environmental Science International
• /
• v.24 no.8
• /
• pp.969-980
• /
• 2015

In order to certificate the distribution and pollution of heavy metal of surface sediments in Nakdong River were collected and analyzed for grain size, water content, ignition loss and heavy metal content. Surface sediments mainly composed of sand(avg. 94.6%) and water content and ignition loss were 20.46%, 1.53% on average. Grain size were relatively fine and organic matter content were relatively high in the Hoichun and Sunakdonggang. Most of heavy metal content(Zn > Cr > Pb > Ni > Cu > Hg) in the Deokcheongang and Sunakdonggang were higher than the other streams. The Igeo were non polluted(less than 0) in all streams and the EF were relatively high in the small stream and PLI were non polluted(less than 1). In addition, organic matter, heavy metal content and pollution were highly correlation with grain size. Surface sediments in study area, heavy metal pollution of the Sunakdonggang were relatively high compared to the other stream but these results were not serious pollution that exceed the sediment pollution evaluation standard of river and lake in Korea and pollution levels adversely affected the majority of benthos were not.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.85-97
• /
• 2012

This study is aimed to identify the color characteristics of the current Korean Brand Apartment, focused on the color of kitchens and dining rooms in the cyber model houses. The Brands which were selected for this study ranked from first to fifth in the contractor ranking and now account for 64 percent of the apartments in sale in Seoul and Gyeonggi Province. In addition, the size between $99m^2$ and $165m^2$ were selected, because it was most preferred at the 2011 survey for user preference on the size of apartment. As this study is for the colors shown on the monintor, colors were extracted from the images of web site with L*, a*, b*. And then, they were converted to Munsell values through computer program, which values were used to identify the color characteristics of hue, tone and to apply the theory of Moon Spencer. The result of the study on the color characteristics of the kitchen and dining room of the five brands' apartments is as follows. Regarding the color use, most of the brands used Y and YR color while as the accent color, P, PB and G were used. This result of main color use for hue was same as the guideline by the literature review, but color for tone showed the difference between brands and the difference between sizes. Next, regarding the color combination, first ambiguity of color harmony was shown the most. And the larger the size was, the more the contrast of color harmony was shown. It means that the color tone had close relation with the sizes of households.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.623-633
• /
• 2017

Food waste has been recognized as a organic sources for composting and many research was conducted to efficiently utilize or treat. This study was to evaluate a feasibility for producing food waste compost under co-composting with mixture of food and animal waste. The mixing ratio of food and animal waste was 35% as main material, which additionally mixed 30% of sawdust for co-composting. Total days of composting experiment were 84 days and each sub samples were collected at every 7 days from starting of composting. Results showed that inner temperature in composting was rapidly increased to $70{\pm}4^{\circ}C$ within 3~5 days depending on mixing animal waste of cattle, pig, and chicken base compared to sole food waste base. Expecially, the CN ratio in the mixture of food and pig water was the highest (16.2) among compost. After finishing composting experiment, maturity was evaluated with solvita and germination test. Maturity index (MI) of the mixture of food and animal waste was ranged between 6~7, but was 3 in sole food waste. Calculated germination index (GI) was at the range of about 100 irrespectively of mixing of food and animal waste. However, NaCl content and heavy metal as Cr, Cu, Ni, Pb, and Zn contents was increased in the mixture of food and animal waste. which was the highest in compost mixed the food and pig waste. Both MI and GI showed that manufactured fertilizer was suitable for fertilizer criteria while sole food waste was not adequate for composting due to composting periods. Overall, mixing the food and animal waste can be utilized for improving compost maturity, but more research should be conducted to make high quality of food waste compost with animal waste in agricultural fields.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.395-408
• /
• 2018

Even after the Fukushima nuclear accident in 2011, the rate of production of electric energy using nuclear energy is increasing, but there is a great danger such as the radioactive waste produced when using nuclear power, the catastrophic accident of nuclear power plant, and connection with nuclear weapons. In particular, Cs present in the ionic form of alkaline elements has a long half-life (30.17 years) because it is readily absorbed by the organism and emits intense gamma rays, thus presenting a serious radiation hazard. Therefore, it must be completely removed before it can be released into the natural ecosystem, because it can adversely affect not only humans but also natural ecosystems. Many adsorbents and ion exchangers which have high Cs removal efficiency have been used in recent years to completely separate and remove by self separation in water. Many adsorbents and ion exchangers which have high Cs removal efficiency have been used in recent years to completely separate and remove by self separation in water. In addition, researches have been doing to synthesize magnetic materials with adsorbents such as HCF and PB, and it shows a great effect in the removal rate of Cs present in wastewater or the maximum Cs adsorption amount. In particular, when a magnetic material was applied, excellent results were obtained in which only Cs was selectively removed from other cations. However, new problems such as applicability in the sea where Cs is directly released, applicability in various pH ranges, and failure to preserve the magnetizing force possessed by the magnetic body have been found. However, researches using ferromagnetic field with stronger magnetic properties than those of magnetic bodies is considered to be insufficient. Therefore, it is considered that if the researches combining the ferromagnetic field with the magnetization ability and functional adsorbents more actively, the radioactive material Cs which adversely affects the natural ecosystem can be effectively removed.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.721-730
• /
• 2018

We investigated the effects of heavy metals in cement in the last 3 years and the amount of waste in the cement manufacturing process. The result shows that the average $Cr^{6+}$ content in cement products is controlled at 10 mg/kg. Cu and Pb have lower detection tendency in white cement than in ordinary portland cement. In addition, heavy metals such as Cd show a certain level of detection regardless of the input wastes. Copper slag and phosphate gypsum are the main influencing factors on the heavy metals in cement products. In auxiliary fuels, plastics waste and wood waste are considered to affect heavy metals in cement products. Alternative raw materials are considered to be affected by the alternative raw materials managed as byproducts. In the case of supplementary fuels, auxiliary fuels managed as waste instead of auxiliary fuels managed as byproducts affect the heavy metals in cement. This study examined the input amount without considering the heavy metals in each waste. Therefore, the result may vary in different situations, and further research must be conducted to supplement the findings. However, if the heavy-metal contents in the waste are constant, it can be used as a reference material for the control of heavy metals in cement products.