• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.47-55
• /
• 2011

Reactor vessel internals comprehensive vibration assessment program(RVI CVAP) is one of the necessary tests to ensure the safety of nuclear power plants. RVI CVAP of U.S. nuclear regulatory commission regulatory guide 1.20(U.S. NRC R.G. 1.20) consists of the analysis, measurement and inspection. One of the core technologies of the measurement program for RVI CVAP is to select suitable sensors because the measurement is conducted during the critical path of the construction period of nuclear power plants. Therefore, we analyzed RVI thermal-hydraulic and structure design data of Palo Verde nuclear power plant(U.S.), Yonggwang nuclear power plant(Korea) and APR1400 and researched measuring sensors used in them; moreover, we investigated sensors used for measurement of RVI CVAP for the last 20 years throughout the world. Based on these results, we selected suitable measuring sensors for RVI CVAP in advanced power reactor 1400(APR1400).

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2012-2022
• /
• 1993

For the machining of the sculptured surfaces on 5-axis CNC milling machine, the milling cutter direction vector was determined in the study (I) with 5-axis post-processing. Thus, it was possible to cut the sculptured surfaces on five-axis CNC milling machine with the end mill cutter. Then, for smooth machined surfaces in five-axis machining of free-from surfaces, this study develops an algorithm for prediction of cusp heights. Also, it generates tool path such that the cusp heights are constrained to a constant value or under a certain value. For prediction of the cusp height between two basis points, a common plane, containing the line crossing two basis points and the summation vector of two normal vectors at two basis points, is defined. The cusp height is the maximum value of scallops on the common plane after end mill cutter passes through the common plane. Sculptured surfaces were machined with CINCINNATI MILACRON 5-axis machining center, model 20V-80, using end mill cutter. Cusp heights were verified by 3-dimensional measuring machine with laser scanner, WEGU Messtechnik GmbH.

• 한국통신학회논문지
• /
• 제27권6B호
• /
• pp.601-609
• /
• 2002

時變 多重經路 無線채널 環境下에서 移動局은 受信信號를 測定하여 網에 報告함으로써 綱이 핸드오버와 같은 網의 制御技能을 修行하도록 한다. 또한, 最大比結合利得 (maximum ratio combining gain, MRC gain)을 最大化하기 위해서 移動局은 信號세기가 가장 큰 經路를 찾아내고 그 時間옵셋 (time offset)을 빠르고 正確하게 測定해야 한다. 본 論文은 移動局이 채널經路의 信號세기를 測定하는 方法과 채널經路의 時間옵셋을 찾는 方法을 提案한다. 또한 W-CDMA 시스템에서는 次世代 高速 패킷 서비스를 目標로 하고 있으므로, 이 때의 性能 分析하기 위하여, 高速 패킷 서비스 環境에 맞도록 低速의 移動體 環境, 無電力制御, 送受信 안테나 다이버시터를 포함한 多重經路 環境下에서 컴퓨터 模擬實驗을 修行하여 最適의 設計 變數값을 導出하고 그 때의 性能 改善量을 비트誤率韻點에서 보인다.

• 드라이브 ㆍ 컨트롤
• /
• 제17권3호
• /
• pp.9-14
• /
• 2020

A special purpose machine with two manipulators and quadruped crawler system is being developed to work at disaster sites where it is intended to quickly respond in the initial stages after the event. In this study, a terrain recognition module is developed so that the above special purpose machine can quickly obtain ground information to help choose its path while recognizing objects in its way, this is intended to enhance the remote driver's limited situational awareness. Terrain recognition modules were developed for two tasks (real-time path guidance, precision terrain measurements). The real-time path guidance analyzes terrain and obstacles while moving, while the precision terrain measurement feature provides more accurate terrain information by precisely measuring the ground in front of the vehicle while stationary. In this study, an air-cooled sensor protection module was developed so that the terrain recognition module can continue its vital tasks in the event of exposure to foreign substances, including scattered dust, mist and rainfall, as well as high temperatures.

• International Journal of Control, Automation, and Systems
• /
• 제1권1호
• /
• pp.35-42
• /
• 2003

This paper proposes a simple, robust, nonlinear controller based on Lyapunov stability for tracking the reference welding path and velocity of a two-wheeled welding mobile robot (WMR). The system has three degrees of freedom including two wheels and one torch slider. Torch slider motion is used for faster tracking because the welding speed is very slow. Control law is obtained from the Lyapunov control function to ensure the asymptotical stability of the system. The controller has three free parameters for adjusting the performance of the controlled system. A simple way of measuring the errors using two potentiometers is introduced. The effectiveness of the proposed controller is shown through simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1418-1423
• /
• 2003

In this paper, a nonlinear controller based on sliding mode control is applied to a two -wheeled Welding Mobile Robot (WMR) to track a smooth-curved welding path at a constant velocity of the welding point. T he mobile robot is considered in terms of dynamics model in Cartesian coordinates and its parameters are exactly known . To obtain the controller, the tracking errors are defined, and the two sliding surfaces are chosen to guarantee that the errors converge to zero asymptotically. Two cases are to be considered: fixed torch and controllable torch. In addition, a simple way of measuring the errors is introduced using two potentiometers. The simulation results are included to illustrate the performance of the control law.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.707-714
• /
• 2000

For self-guiding track-type orchard sprayer, a low-cost steering controller was developed using two ultrasonic sensors, two DC motors and 80196kc microprocessor. The operating principle of controller was to travel the sprayer between artificial targets such as wood stick placed every 1 m along both sides of the demanded path of speed sprayer. Measuring distances to both targets ahead with the ultrasonic sensors mounted on the front end of sprayer, the controller could determine how much offset the position of sprayer was laterally. Then the steering angle was calculated to actuate DC motors connected to the steering clutches, where the fuzzy control algorithm was used. Equipped with the controller developed in this research, the sprayer could be traveled along demanded path, the centerline between targets, at speeds of up to 0.4m/sec with an accuracy of ${\pm}$20cm.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.79-88
• /
• 1998

This study deals with the development of CAM system which can machine and measure any shape of mold and die by machining center and coordinate measureing machine . The overall goal of the CAM system is to achieve the mold and die machining , from digitizing through to final cutting. The hardware of the system comprises PC and machining center. CMM. There are three steps in the mold and die machining. (1) measuring of physical model by the CMM, (2) geometric modeling by the CAD system, (3) generation of NC code by the tool path compensated for tool radius. It is developed a software package, with which can conduct a micro CAM system in the PC without economical burden.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권6호
• /
• pp.771-780
• /
• 2016

Detecting a set of longest paths is one of the crucial steps in static timing analysis and optimization. Recently, the process variation during manufacturing affects performance of the circuit design due to nanometer feature size. Measuring the performance of a circuit prior to its fabrication requires a considerable amount of computation time because it requires multi-corner and multi-mode analysis with process variations. An efficient algorithm of detecting the K-most critical paths in multi-corner multi-mode static timing analysis (MCMM STA) is proposed in this paper. The ISCAS'85 benchmark suite using a 32 nm technology is applied to verify the proposed method. The proposed K-most critical paths detection method reduces about 25% of computation time on average.

• Genomics & Informatics
• /
• 제5권3호
• /
• pp.124-128
• /
• 2007

Microarray technology enables us to measure the expression of tens of thousands of genes simultaneously under various experimental conditions. Clustering analysis is one of the most successful methods for analyzing microarray data using the assumption that co-expressed genes may be co-regulated. It is important to extract meaningful clusters from a long unordered list of clusters and to evaluate the functional homogeneity and heterogeneity of clusters. Many quality measures for clustering results have been suggested in different conditions. In the present study, we consider biological pathways as a collection of biological knowledge and used them as a reference for measuring the quality of clustering results and functional homogeneities. PathTalk visualizes and evaluates functional relationships between gene clusters and biological pathways.