• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.357-365
• /
• 2011

Exposure measurement of agricultural worker to pesticide is one of important part of health risk assessment of pesticide. Therefore exposure matrices, apparatus, instruments and methods must be validated in advance to field experiment. In this study, method validation with an organophosphorus insecticide fenthion was carried out for exposure monitoring of agricultural worker. LOD and LOQ were 0.01 and 0.05 ng, respectively. Calibration curve linearity ($R^2$ > 0.999) and reproducibility (C.V. < 3%) were also excellent. Recovery at LOQ, 10LOQ and 100LOQ levels from gloves, socks, mask, patch, solid sorbent, glass fiber filter was 76~113% (C.V. < 3%). Trapping efficiency was 95~105% while no breakthrough was observed. Method validation for the exposure monitoring was established successfully through several experiments. Such method validation can be usually performed in laboratory and not much different for each pesticide so that, this techniques will be applied widely in research for pesticide exposure monitoring by combination with body surface area and respiration rates.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.265-274
• /
• 2011

In this paper, it is studied on wide radiating slot antenna's miniaturization for ultra wide-band(UWB) technologies and notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service of IEEE standards 802.11 a/n. Proposed antenna that wide slot is decreased from $\lambda/2$ to $\lambda/4$ length of resonant frequency has decreased by 72 % compared with conventional antenna. And optimized T-shaped CPW-fed stub has satisfied UWB bandwidth for 3.0~11.8 GHz. Then, creating 2-order Hilbert curve slot line in the stub's patch area, 4.9~5.6 GHz that centered frequency is 5 GHz is eliminated. Finally, the designed antenna constructed on FR4-epoxy has $20{\times}15\;mm^2$ dimension. The measured results that are obtained return loss under -10 dB through 3.2~11.8 GHz without Wi-Fi bandwidth, a linear phase characteristic, a stable group delay, and omnidirectional radiation patterns are presented.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.6
• /
• pp.843-849
• /
• 1999

The prevalence of nonspecific interstitial pneumonitis(NSIP) in HIV-positive patients with pulmonary disease has varied from 11 to 38%. But NSIP in HIV-positive patients is indistinguishable from Pneumocystis carinii pneumonia(PCP) clinically and radiologically. The number of HIV-positive patients is less in Korea than in western developed countries, so little attention has been paid to the differential diagnosis between NSIP and PCP. We report a case of NSIP in HIV-positive, 61-year-old man which mimicked PCP. He presented with cough, sputum and mild exertional dyspnea. Lung sound was clear. But, chest X-ray and HRCT demonstrated diffuse patch and bilateral ground-glass opacities in central and perihilar area of both lung. Microbial pathogens were not found on sputum, BAL fluid and tissues taken by TBLB. In transbronchial lung biopsy specimen, interstitial infiltrates with lymphocytes were distributed on peribronchiolar regions. A pathologic diagnosis of NSIP was suggested, he received symptomatic treatment. The follow-up chest X-ray showed near complete resolution.

• The Korean Journal of Quaternary Research
• /
• v.23 no.1
• /
• pp.25-37
• /
• 2009

Geochemical composition and clay minerals of surface and core sediments around off the Jeju Island were analyzed for identification of sediment origins. The clay mineral distribution is mainly controlled by the sediment source and the dominant circulation pattern. Smectite is highly concentrated (>8%) in the northwest near the South Yellow Sea and in the outer-shelf mud patch. It seems to be due to the high supply of smectite transported from China where fine-grained sediments are discharged from modern and ancient Huanghe River. The relatively high abundance of kaolinite are found in northeastern nearshore area and the southwest near Changjiang estuary. It seems to be supplied from Changjiang River and the southwestern Korea rivers. The sediment accumulation rates measured by $^{210}Pb$ geochronrom mowere 0.20 to 0.54cm/mr or 0.15 to $0.42g/cm^2{\cdot}mr^{-1}$ AOJI, with decreasing rates from the west part to the east part, resulting in the supply of fine-grained suspended sediments from the Changjiang and Huanghe Rivers system. The discrimination diagrams clearly show that the sediments around Jeju Island in the northern East China Sea are ultimately sourced from Chinese rivers, especially from the Huanghe River, whereas the sediment in the northeast part might come from Korean rivers and the Jeju Island.

• 한국해양학회지
• /
• v.24 no.4
• /
• pp.165-171
• /
• 1989

To examine the sample variability of zooplankton, samples were collected at two stations in the nearshore off Anhung (Chungnam, Korea), using a NORPAC net (76 Cm diameter, 0.333 mm mesh size) for two days, April 5 and 6, 1989. The net was towed vertically to eliminate the source of variation due to vertical migration. During the period of 6 hours, triplicate sampling was done every one or two hour at each station. Species composition and abundances at two stations were not so different, but the abundances at each station varied greatly with respect to sampling time. Greater abundance at one sampling time ranged 2.3-8.7 times of smaller abundance at another sampling time. At the level of ${\alpha}=0.05$, however, mean abundances of different sampling time did not differ significantly from each other due to the large variance. It was believed that the large variance was caused by the time dependent effect of patchiness of which parameters were varied with time because of sea water movement. From the variation within the triplicate samples, it was considered that the abundance data obtained from single tow were not significantly different from the data in the range of 50-200% of those from single tow. From these results, the necessity for the replicate and time dependent sampling was indicated. In the nearshore like the sampling site of this study, it seemed to be better to reduce the number of stations for the replicate and time dependent sampling though the proper sampling scheme was to be decided based on the goal of the study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.489-495
• /
• 2018

In this paper, we designed and fabricated WLAN / UWB communication antennas operating at 3.3 [GHz] and 5 [GHz] bands in order to effectively use the high-speed communication network system that improved antenna miniaturization, gain and radiation pattern. Microstrip patch antennas were chosen to improve the bandwidth. The slot width, length, and transmission line width were calculated using the theoretical formula for each step. Simulation results show that the return loss is -14.053 [dB] at 3.3 [GHz] and -13.118 [dB] at 5 [GHz]. The gain showed a value of 2.479 [dBi] at 3.3 [GHz] and a value of 3.317 [dBi] at 5 [GHz]. After optimizing it with the CST Microwave Studio 2014 program, which can be 3D-designed, Based on these results, we investigated the performance of antennas by measuring their characteristics. In recent years, WLAN, which is a variety of wireless technologies that are continuously developing, and UWB, which is a communication technology which is increasing in frequency band due to an increase in demand of the technology users, is used for a high speed wireless communication system. Communication seems to be possible.

• YAKHAK HOEJI
• /
• v.42 no.1
• /
• pp.25-30
• /
• 1998

This study was designed to compare the absorption fraction and extent of ketoprofen gels and a matrix typed ketoprofen plaster patch. 3g (90mg as ketoprofen) of the two gels whi ch has oleohydrogel or hydrogel as a base, respectively, and 3 pieces of plaster patches (90mg as ketoprofen) were, applied in the area of 210$cm^2$ on forearm in 12 volunteers by cross over design. Blood samples were collected serially up to 24 hours and the plasma concentrations of ketoprofen were analyzed by HPLC using flurbiprofen as an internal standard. The detection limit of the assay was 1ng/ml of ketoprofen in plasma. The pharmacokinetic parameters (e.g. $AUC_{24hr}$, $AUMC_{24hr}$, MRT, Fraction Absorbed) were calculated from the plasma concentrations time data of each volunteer. The oleo-hydrogel showed significantly higher absorption fraction and extent of ketoprofen than the current hydrogel. The mean plasma concentrations of the oleo-hydrogel were increased to 98.46${\pm}$23.15ng/ml by 6 hour after application, and increased futher to 100.61${\pm}$18.65ng/ml at 24 hour. On the other hand, those of the hydrogel were increased 17.61${\pm}$18.65ng/ml at 5 hour to 34.68${\pm}$9.65ng/ml at 24 hour gradually. Therefore the plasma concentrations of oleo-hydrogel at each measured time were 3~7 times greater than those of the hydrogel with statistical significance. The $AUC_{24hr}$ (1797.26${\pm}$52.09ng.h/ml) of the oleo-hydrogel was 3.5 times greater (P<0.05) than that (516.17${\pm}$104.52ng.h/ml) of the hydrogel. The plaster patches showed higher bioavailability ($AUC_{24hr}$ 2877.37${\pm}$578.27ng.h/ml) than the olea-hydrogel ($AUC_{24hr}$ 1797.26${\pm}$52.09ng.h/ml) without statistical significance. But the absorption fraction of the oleo-hydrogel was rather higher than that of the plaster patches during the first 6 hours after administration. These results suggest that newly developed ketoprofen gel which is used oleo-hydrogel as a base would show excellent skin permeation on topical application for the corresponding clinical indications and could be absorbed as well as plaster patches.

• Journal of Adhesion and Interface
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2019

In this study, the micro- and nano-particles were used and their shapes were transferred into the polydimethylsiloxane (PDMS) film to fabricate the dry adhesives and their properties were investigated. The Cu nanoparticles of the sizes of 20 nm, 40 nm and 70 nm and the polymethylmethacrylate (PMMA) beads of the size of $5{\mu}m$ were used to transfer their images and the resultant properties of the dry adhesives were compared. The effects of particle size and materials on the mechanical property, tensile adhesion strength, light transmittance, surface morphology, water contact angle were studied. The dry adhesives obtained from the transfer process of Cu nanoparticles with the size of 20 nm resulted in the enhancement of tensile adhesion strength more than 300% compared to that of the bare PDMS. The formation of nanostructure of large surface area on the surface of the PDMS film by the Cu nanoparticles may responsible for the improvement. This study suggests that the use of nanoparticles during the fabrication of PDMS dry adhesives is easy and effective and could be applied to the fabrication of the medical patch.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.6
• /
• pp.571-581
• /
• 2020

Vegetation affects water level change and flow resistance in rivers and impacts waterway ecosystems as a whole. Therefore, it is important to have accurate information about the species, shape, and size of any river vegetation. However, it is not easy to collect full vegetation data on-site, so recent studies have attempted to obtain large amounts of vegetation data using terrestrial laser scanning (TLS). Also, due to the complex shape of vegetation, it is not easy to obtain accurate information about the canopy area, and there are limitations due to a complex range of variables. Therefore, the physical structure of vegetation was analyzed in this study by reconfiguring high-resolution point cloud data collected through 3-dimensional terrestrial laser scanning (3D TLS) in a voxel. Each physical structure was analyzed under three different conditions: a simple vegetation formation without leaves, a complete formation with leaves, and a patch-scale vegetation formation. In the raw data, the outlier and unnecessary data were filtered and removed by Statistical Outlier Removal (SOR), resulting in 17%, 26%, and 25% of data being removed, respectively. Also, vegetation volume by voxel size was reconfigured from post-processed point clouds and compared with vegetation volume; the analysis showed that the margin of error was 8%, 25%, and 63% for each condition, respectively. The larger the size of the target sample, the larger the error. The vegetation surface looked visually similar when resizing the voxel; however, the volume of the entire vegetation was susceptible to error.

• Korean Journal of Environment and Ecology
• /
• v.34 no.6
• /
• pp.573-588
• /
• 2020

The study investigated the forest vegetation structure of Kongju National University Forests in the vicinity of Seokjangri-dong to provide the information needed for efficient use and management. It conducted a Z-M phytosociological vegetation survey in 60 quadrate plots in August 2019 and generated the actual vegetation map by analyzing the physiognomic community classification and mean importance value. The physiognomic community classification showed five vegetation community types: Quercus acutissima community, Pinus densiflora community, Quercus variabilis community, Pinus rigida community, and Quercus serrata community. The relative importance value in the Q. acutissima community was 31.4% for Q. acutissima, 9.6% for Prunus spp., and 9.0% for Q. variabilis. In the P. densiflora community, it was 24.9% for P. densiflora, 12.4% for Q. acutissima, and 11.5% for Q. serrata. In the Q. variabilis community, it was 25.3% for Q. variabilis, 9.8% for Prunus spp., and 8.5% for Q. acutissima. In the P. rigida community, it was 28.4% for P. rigida 28.4%, 10.0% for Q. acutissima, and 9.3% for P. densiflora. In the Q. serrata community, it was 27.0% for Q. serrata, 11.3% for Q. aliena, and 11.5% for Styrax japonica. The actual vegetation map based on the uppermost dominant species to identify the forest vegetation's spatial distribution characteristics indicated that the natural vegetation covered the most with 87.5%, the number of vegetation patches was 87, and the average area per patch was 1.46ha.