• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.107-108
• /
• 2000

We propose the method which is possible to fabricate the electrodes with the fine pattern and low resistance by photolithography and electroplating. The widths of pattern fabricated were 30, 50, 70 and 100um and the thickness could be up to $10{\mu}m$. The resistivity of the copper electrode electroplated was below $2.0{\mu}{\Omega}$ cm which is about half of photosensitive silver electrode. Dielectric layer was coated on the electrodes by screen printing and the pores harmful to the discharge were not formed after heat treatment. In the viewpoint of resistance and patterning, this method has much higher potential for large area display than other methods like screen printing, photosensitive conductive paste method and sputtering.

• 대한화학회지
• /
• 제51권3호
• /
• pp.291-297
• /
• 2007

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.177-181
• /
• 1995

Lead-acid battery is used widely as a power source in the automobile, industrial machines, folk lifts U.P.S etc. But this battery has man\ulcorner disadvantages such as heavy low energy density, environment problem etc. In this paper, we have studied the physicochemical and electrochemical properties of lead-acid battery positive plates with regard to the method of curing. It has been observed that curing conditions strongly influence electrode composition and electrchemical performance.

• 전자공학회논문지 IE
• /
• 제44권2호
• /
• pp.26-31
• /
• 2007

카본나노튜브 전계 방출 어레이(carbon nanotube field emission array, CNT FEA)를 유리기판 상에 형성시키기 위하여 CNT 페이스트를 스크린 프린팅 후 표면처리를 수행하였다. 본 실험에서는 효과적인 표면처리 방법으로서 이온 빔을 조사(expose)시키는 방법을 연구하였다. 먼저, 유리 기판상에 감광성 CNT 페이스트를 스크린 프린팅하고 UV 후면노광 및 현상공정에 의해 선택적으로 CNT 페이스트를 남겼다. 다시 고온에서 소성후 CNT들은 바인더 성분들에 의해 문히게 된다. 본 실험에서는 소성된 CNT 페이스트의 표면상에 Ar 이온빔을 가속시켜 페이스트의 바인더(binder)를 선택적으로 제거함으로써 전계방출 특성을 향상시킬 수 있었다. 표면처리를 위한 이온 빔 가속시 이온빔의 가속에너지에 따라 특성이 크게 변화되었는데, 본 연구에서는 100 V의 낮은 가속 전압에서 가장 높은 전계방출 특성을 나타내었으며 가속 전압이 너무 높으면 바인더 성분 외에도 CNT 자체가 제거됨으로써 오히려 특정이 저하됨을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제27권11호
• /
• pp.718-724
• /
• 2014

In this work, in order to manufacture the photoelectrode of dye-sensitized solar cells, the different anatase $TiO_2$ paste was prepared by simple route using hydrothermal method. In comparison with the traditional preparing process, the hydrothermally synthesized $TiO_2$ gel was used to make paste directly. Thus, the making process was simplified and the solar conversion efficiency was improved. In comparison with 5.34% solar energy efficiency of HP-1 photoelectrode, the 6.23% efficiency of HDP-1 electrode was improved by 16.67%. This is because hydrothermally synthesized $TiO_2$ gel was used to make paste directly, the dispersibility between $TiO_2$ particles was improved and get the smoother network, leading to the charge transport ability of the electron generated in dye molecular was improved. Further, HDP-2 photoelectrode delivered the best results with Voc (open circuit voltage), Jsc (short circuit current density) FF (fill factor) and ${\eta}$(solar conversion efficiency) were 0.695 V, $15.81mA\;cm^{-2}$, 61.48% and 6.80%, respectively. In comparison with 5.34% of HP-1 photoelectrode, it was improved by 27.34%.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.231-237
• /
• 2018

In this study, two important requirements for the home production of a robot to detect and remove improvised explosive devices (IEDs) are presented in terms of the total cost for robot system development and the performance improvement of the mine detection technology. Firstly, cost analyses were performed in order to provide a reasonable solution following an engineering estimate method. As a result, the total cost for a mass production system without the mine detection system was estimated to be approximately 396 million won. For the case including the mine detection system, the total cost was estimated to be approximately 411 million won, in which labor costs and overhead charges were slightly increased and the material costs for the mine detection system were negligible. Secondly, a method for fabricating the carbon nanotube (CNT) based gas detection sensor was studied. The detection electrodes were formed by a photolithography process using a photosensitive CNT paste. As a result, this method was shown to be a scalable and expandable technology for producing excellent mine detection sensors. In particular, it was found that surface treatments by using adhesive taping or ion beam bombardment methods are effective for exposing the CNTs to the ambient air environment. Fowler-Nordheim (F-N) plots were obtained from the electron-emission characteristics of the surface treated CNT paste. The F-N plot suggests that sufficient electrons are available for transport between CNT surfaces and chemical molecules, which will make an effective chemiresistive sensor for the advanced IED detection system.

• 공업화학
• /
• 제26권5호
• /
• pp.624-629
• /
• 2015

호모게나이저로 파쇄한 쑥 조직을 탄소반죽에 혼입시켜 과산화수소 감응 바이오센서를 제작하고 그것의 전기화학적 특성을 전압전류법으로 살펴보았다. Hanes-Woolf 도시의 좋은 직선성은 기질분해가 쑥 과산화효소에 의하여 촉매화되고 있음을 보여 주었으며, 작은 값의 대칭인자(${\alpha}$, 0.28)는 전극전위의 변화가 반응속도변화에 미치는 영향이 대단히 민감한 것을 말하여 주었다. 이런 실험적 사실들은 과산화수소의 분해가 쑥전극 표면에 있는 과산화효소의 촉매력에 의하여 정성적, 정량적으로 분해되고 있음을 보여 주는 것으로 서양 고추냉이로부터 추출된 고가의 시판 과산화효소를 쑥 조직으로 대치할 수 있음을 확신하게 하는 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3357-3361
• /
• 2013

Alumina microfibers with porous structures were prepared through hydrothermal reaction, and then used to modify the surface of carbon paste electrode (CPE). After modification with alumina microfibers, the electrochemical activity of CPE was found to be greatly improved. On the surface of alumina microfibers-modified CPE, the oxidation peak current of salvianolic acid B, a main bioactive compound in Danshen with anti-oxidative and anti-inflammatory effects, was remarkably increased compared with that on the bare CPE surface. The influences of pH value, amount of alumina microfibers and accumulation time were studied. Based on the strong signal amplification effects of alumina microfibers, a novel electrochemical method was developed for the detection of salvianolic acid B. The linear range was from 5 ${\mu}gL^{-1}$ to 0.3 mg $L^{-1}$, and the detection limit was 2 ${\mu}gL^{-1}$ (2.78 nM) after 1-min accumulation. The new method was successfully used to detect salvianolic acid B in ShuangDan oral liquid samples, and the recovery was over the range from 97.4% to 102.9%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1291-1292
• /
• 2007

Recently, there were many researches for efficiency improvement of DSC. Among of these works, research of surface treatment is still a prerequisite for electron diffusion, light-harvesting and surface state of DSC.[1] Using of the surface treatment, it can be raise up porosity of $TiO_2$ nano-crystalline structure on photo-electrode. There are chemical, physical, electrical and optical methods which raise up its porosity. In this paper, we have designed and manufactured MOPA-type ultrasonic circuit (100W, frequency and duty variable). Manufactured ultrasonic circuit to use to force cavity density and power into $TiO_2$ paste. Then, we have optimized forcing time, frequency and duty of ultrasonic irradiation for surface treatment of photo-electrode of DSC. In I-V characteristic test of DSC, ultrasonic and thermal treated DSC shows 19% improved its efficiency against monolithic DSC. And it shows stability of light-harvesting from drastically change of light irradiation test.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.15-20
• /
• 2019

Most high-efficiency n-type silicon solar cells are based on the high quality surface passivation and ohmic contact between the emitter and the metal. Currently, various metalization methods such as screen printing using metal paste and physical vapor deposition are being used in forming electrodes of n-type silicon solar cell. In this paper, we analyzed the degradation factors induced by the front electrode formation process using e-beam evaporation of double passivation structure of p-type emitter and $Al_2O_3/SiN_x$ for high efficiency solar cell using n-type bulk silicon. In order to confirm the cause of the degradation, the passivation characteristics of each electrode region were determined through a quasi-steady-state photo-conductance (QSSPC).