• Title/Summary/Keyword: Particular matter

Search Result 388, Processing Time 0.027 seconds

Investigation on Diesel Injection Characteristics of Natural Gas-Diesel Dual Fuel Engine for Stable Combustion and Efficiency Improvement Under 50% Load Condition (천연가스-디젤 혼소 엔진의 50% 부하 조건에서 제동효율 및 연소안정성 개선을 위한 디젤 분무 특성 평가)

  • Oh, Sechul;Oh, Junho;Jang, Hyungjun;Lee, Jeongwoo;Lee, Seokhwan;Lee, Sunyoup;Kim, Changgi
    • Journal of the Korean Institute of Gas
    • /
    • v.26 no.3
    • /
    • pp.45-53
    • /
    • 2022
  • In order to improve the emission of diesel engines, natural gas-diesel dual fuel combustion compression ignition engines are in the spotlight. In particular, a reactivity controlled compression ignition (RCCI) combustion strategy is investigated comprehensively due to its possibility to improve both efficiency and emissions. With advanced diesel direct injection timing earlier than TDC, it achieves spontaneous reaction with overall lean mixture from a homogeneous mixture in the entire cylinder area, reducing nitrogen oxides (NOx) and particulate matter (PM) and improving braking heat efficiency at the same time. However, there is a disadvantage in that the amount of incomplete combustion increases in a low load region with a relatively small amount of fuel-air. To solve this, sensitive control according to the diesel injection timing and fuel ratio is required. In this study, experiments were conducted to improve efficiency and exhaust emissions of the natural gas-diesel dual fuel engine at low load, and evaluate combustion stability according to the diesel injection timing at the operation point for power generation. A 6 L-class commercial diesel engine was used for the experiment which was conducted under a 50% load range (~50 kW) at 1,800 rpm. Two injectors with different spray patterns were applied to the experiment, and the fraction of natural gas and diesel injection timing were selected as main parameters. Based on the experimental results, it was confirmed that the brake thermal efficiency increased by up to 1.3%p in the modified injector with the narrow-angle injection added. In addition, the spray pattern of the modified injector was suitable for premixed combustion, increasing operable range in consideration of combustion instability, torque reduction, and emissions level under Tier-V level (0.4 g/kWh for NOx).

A 40-year History of the Asia Pacific Journal of Small Business : Small and Medium Venture Business Policy and Strategic Management of Small and Medium Venture Businesses (중소기업연구 40년의 역사: 중소벤처기업정책 및 중소벤처기업의 전략적 경영)

  • Seo, Won-Seok;Lee, Sang-Myung
    • Korean small business review
    • /
    • v.42 no.3
    • /
    • pp.101-121
    • /
    • 2020
  • Marking the 40th anniversary of the founding of The Korean Association of Small Business Studies, this paper was carried out to shed light on the historical trend of 40 years of small and medium business research through the papers published in the Asia Pacific Journal of Small Business and to consider the direction of future small and medium business research. In particular, we will focus on small and medium venture business policies and strategic management aspects of small and medium venture businesses to analyze the contents of published papers related to the subject and contribute to finding implications and future research directions. In order to analyze the research trends of small and medium venture business policies and strategic management sectors of small and medium venture companies covered in the Asia Pacific Journal of Small Business from 1979 to 2019, the analysis was divided by time and item based on research subjects, research methods, researchers, etc., and the primary analysis results are as follows: First, out of a total of 1,056 research papers, research papers on small and medium venture enterprise policy and strategic management showed a ratio of about 14% and 11% of the total research. Second, in terms of research subjects, the proportion of policy research on funds and start-ups and ventures was high in the field of small and medium venture enterprise policy, and the research on internationalization strategy was carried out the most in the area of strategic management. Third, qualitative research was more prominent until the 1980s, but the proportion of quantitative research began to increase after the 1990s, and since then, quantitative research has been carried out more than qualitative research. Fourth, over the past 40 years, Hanyang University, Kyungpook National University, Konkuk University, etc. were the institutions that presented research papers most actively in the areas of small and medium venture business policy and strategic management, and the research institute's participation was somewhat insufficient. The main implications of this study for the continuous development of the Asia Pacific Journal of Small Business are as follows. First, it is necessary to enhance the link between research on policy research and strategic management of small and medium venture companies in terms of research subject matter. Second, more diversity should be pursued in terms of research methods. Third, it is necessary to increase the participation rate of public and private research institutes related to small and medium venture enterprises in academic societies.

Analysis of Soil Changes in Vegetable LID Facilities (식생형 LID 시설의 내부 토양 변화 분석)

  • Lee, Seungjae;Yoon, Yeo-jin
    • Journal of Wetlands Research
    • /
    • v.24 no.3
    • /
    • pp.204-212
    • /
    • 2022
  • The LID technique began to be applied in Korea after 2009, and LID facilities are installed and operated for rainwater management in business districts such as the Ministry of Environment, the Ministry of Land, Infrastructure and Transport, and LH Corporation, public institutions, commercial land, housing, parks, and schools. However, looking at domestic cases, the application cases and operation periods are insufficient compared to those outside the country, so appropriate design standards and measures for operation and maintenance are insufficient. In particular, LID facilities constructed using LID techniques need to maintain the environment inside LID facilities because hydrological and environmental effects are expressed by material circulation and energy flow. The LID facility is designed with the treatment capacity planned for the water circulation target, and the proper maintenance, vegetation, and soil conditions are periodically identified, and the efficiency is maintained as much as possible. In other words, the soil created in LID is a very important design element because LID facilities are expected to have effects such as water pollution reduction, flood reduction, water resource acquisition, and temperature reduction while increasing water storage and penetration capacity through water circulation construction. In order to maintain and manage the functions of LID facilities accurately, the current state of the facilities and the cycle of replacement and maintenance should be accurately known through various quantitative data such as soil contamination, snow removal effects, and vegetation criteria. This study was conducted to investigate the current status of LID facilities installed in Korea from 2009 to 2020, and analyze soil changes through the continuity and current status of LID facilities applied over the past 10 years after collecting soil samples from the soil layer. Through analysis of Saturn, organic matter, hardness, water contents, pH, electrical conductivity, and salt, some vegetation-type LID facilities more than 5 to 7 years after construction showed results corresponding to the lower grade of landscape design. Facilities below the lower level can be recognized as a point of time when maintenance is necessary in a state that may cause problems in soil permeability and vegetation growth. Accordingly, it was found that LID facilities should be managed through soil replacement and replacement.

The Problem of Theodicy in Daesoon Jinrihoe (대순진리회에서 신정론 문제)

  • Cha, Seon-keun
    • Journal of the Daesoon Academy of Sciences
    • /
    • v.33
    • /
    • pp.257-286
    • /
    • 2019
  • This study aims to explain theodicy in Daesoon Jinrihoe using established theodicies. Theodicy in Daesoon Jinrihoe can be described as follows: within the worldview of Daesoon Jinrihoe, the problems of evil and suffering are better addressed by analyzing the problem of mutual contention. Accordingly, theodicy in Daesoon Jinrihoe is a matter which should be discussed only in regards to the time period known as the Former World and the transition period after the Reordering Works that leads up to the Later World. The Later World does not operate under patterns of mutual contention. Consequently, there will be no suffering. Therefore, issues of theodicy are irrelevant in the Later World. Theodicy should be dealt differently as it pertains to the Former World and the previously mentioned transition period. Daesoon Thought posits that there is an underlying principle presides over the cosmos, and the divine beings act in accordance with it and perform specific duties in their own subdivisions. The cosmic principle is able to contain cycles of both Sanggeuk ('mutual destruction' in general usage, but 'mutual contention' in Daesoon Thought related to the Former World) and sangsaeng ('mutual generation' in general usage and 'mutual beneficence' in Daesoon Thought related to the Later World). Suffering came into being due to mutual contention. However, mutual contention was not set into motion maliciously, but was arranged instead to facilitate the realization of greater values such as growth and development. In other words, mutual contention are not products of a moral value the nature of which is bad or wrong. Yet, since the world has operated under mutual contention from time immemorial, a nearly incalculably vast multitude of grievances have accumulated. In addition, the divine beings who had operated under mutual contention often made mistakes and spread confusion. This extreme situation resulted in tremendous disasters breaking out all over the world. Perhaps this particular theodicy could be named "Dualistic Sanggeuk Theology (Dualistic Theodicy of Mutual Contention)." After the divine beings reported to the Supreme God that the world had fallen into a serious crisis, the Supreme God penetratingly examined the circumstances of the world and then descended to Earth as a human being named Jeungsan. As Jeungsan practiced the Reordering Works of Heaven and Earth, the Great Opening was preordained by Him. As a result, the transition period started, and from that point onward, theodicy should be described differently. It is presumed that all creatures will be judged at the time of the Great Opening. This will result in the annihilation of all wicked beings including both divine beings and humans. There will also be the establishment of an earthly paradise as well as grievance resolution for all beings prior the Great Opening. This can also be called "The Eschatological Theodicy of the Resolution of Grievances." Theodicy in Daesoon Jinrihoe adopts the two theodicies mentioned above. In addition to that, various theodicies from other traditions such as Irenaean ("soul-making") Theodicy, Free Will Theodicy, Recompense Theodicy, Afterlife Theodicy, Karma Samsara Theodicy, theodicy of participation, and Communion Theodicy can all potentially be applied on a case by case basis.

A Study on Conflict-factors and Influence of the Bremen Controversy of 1905 ('브레멘 학교논쟁'(1905)의 기독교교육 갈등요인에 관한 영향사 연구)

  • Jeongdo An
    • Journal of Christian Education in Korea
    • /
    • v.74
    • /
    • pp.227-253
    • /
    • 2023
  • Purpose of the Study: This paper focuses on a significant historical event, namely the Bremen teachers' movement of 1905, which aimed to abolish religious classes in public schools. By examining an incident in the German history of religious education that remains unfamiliar to the Korean Christian Association, I aim to explore the interconnected diachronic and synchronic influences involved in this particular event. Contents and Method: The religious controversy sparked by the Bremen Teacher's movement of 1905 marked the first official call for reform towards neutral religious education in schools. Several factors contributed to this debate, including the rise of civil society in the 19th century, advancements in science and scholarship, the emergence of social democracy, and the conflict between the Lutheran and Reformed Churches. This paper delves into the historical context of the controversy and analyzes its impact on the develop of religious education in Germany. As reflected in the Bremen Document, the official outcome of the Bremen Teacher's Movement, educators argued for the separation of religion and education, emphasizing that religion is a deeply personal matter. The document called for the adoption of value-neutral moral education in public schools, achieved through objective Bible-History classes. This paper explores the impact of the Bremen School Dispute of 1905 on the development of religious education in Germany. Specifically, the provisions of the Bremen State Constitution of 1948 and the German Basic Law of 1949 were influenced by the controversy, with Article 141 of the Basic Law - known as the 'Bremen Clause' - providing a legal basis for the exclusion of churches from religion-classes at Schools in Bremen. The Bible-History Classes advocated in the Bremen Documents served as the basis for the present-day Bremen religious education curriculum well known for neutral objective religion-classes. Conlusion: This study analyzes the background, content, and influence of the Bremen School Controversy, which remains relatively unknown in Korea. The findings of this study can contribute to the ongoing discussion of Christian school education in Korea, with an emphasis on maintaining a Christian identity while promoting religious publicity in the classroom.

Growth, Productivity and Forage Values of Winter Cereal Crops at Paddy Fields in the Southern Region of Korea (남부지역 논에서 동계 맥류의 생육특성, 생산성 및 사료가치)

  • Seo Young Oh;Jong Ho Seo;Jisu Choi;Tae Hee Kim;Seong Hwan Oh
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.25 no.2
    • /
    • pp.61-70
    • /
    • 2023
  • In order to select high-quality winter cereal crops with high yield and to increase self-sufficiency rate of forage, their growth, yield, and feeding value of several cereal crops cultivated in winter were investigated in the paddy field of the southern region. Four wheat cultivars and green barley headed in early and mid-April, while oat and Italian ryegrass headed in early May. Fresh forage yields of wheats, green barley, and oat were significantly higher than that of Italian ryegrass, and dry forage yields of wheats and green barley were significantly higher than those of not only Italian ryegrass but also oat. In particular, the yield of a wheat cultivar 'Cheongwoo' was the highest. Mineral contents of wheat forages, even though low, were in the range 27.8~33.7mg·g-1 DW suitable for feeding cattle and young female cows. Crude protein content of a wheat cultivar 'Cheongwoo' was high up to 7.6%, similarly to 7.0% requiring for feeding cattle. Feeding values such as total digestible nutrients (TDN) and relative feed value (RFV) of wheats and green barley were superior to those of oat and Italian ryegrass. In addition, dry matter rates of 4 wheat cultivars and green barley were in the range 30~40%, indicating that wheat cultivars and green barley could be used for various feeding purposes such as green or dried forage, and silage. Based on these results, wheat cultivars including 'Cheongwoo' and green barley could be encouraged to be cultivated in paddy fields, as high-quality winter forage crops with high yield.

Changes in Soil Physiochemcial Properties Over 11 Years in Larix kaempferi Stands Planted in Larix kaempferi and Pinus rigida Clear-Cut Sites (낙엽송과 리기다소나무 벌채지에 조성된 낙엽송 임분의 11년간 토양 물리·화학적 특성 변화)

  • Nam Jin Noh;Seung-hyun Han;Sang-tae Lee;Min Seok Cho
    • Journal of Korean Society of Forest Science
    • /
    • v.112 no.4
    • /
    • pp.502-514
    • /
    • 2023
  • This study was conducted to understand the long-term changes in soil physiochemical properties and seedling growth in Larix kaempferi (larch) stands planted in clear-cut larch and Pinus rigida (pine) forest soils over an 11-year period after reforestation. Two-year-old bare-root larch seedlings were planted in 2009-2010 at a density of 3,000 seedlings ha-1 in clear-cut areas that harvested larch (Chuncheon and Gimcheon) and pine (Wonju and Gapyeong) stands. We analyzed the physiochemical properties of the mineral soils sampled at 0-20 cm soil depths in the planting year, and the 3rd, 7thand 11th years after planting, and we measured seedling height and root collar diameter in those years. We found significant differences in soil silt and clay content, total carbon and nitrogen concentration, available phosphorus, and cation exchangeable capacity between the two stands; however, seedling growth did not differ. The mineral soil was more fertile in Gimcheon than in the other plantations, while early seedling growth was greatest in Gapyeong. The seedling height and diameter at 11 years after planting were largest in Wonju (1,028 tree ha-1) and Chuncheon (1,359 tree ha-1) due to decreases in stand density after tending the young trees. The soil properties in all plantations were similar 11 years after larch planting. In particular, the high sand content and high available phosphorus levels (caused by soil disturbance during clear-cutting and planting) showed marked decreases, potentially due to soil organic matter input and nutrient uptake, respectively. Thus, early reforestation after clear-cutting could limit nutrient leaching and contribute to soil stabilization. These results provide useful information for nutrient management of larch plantations.

A Legal Study on liability for damages cause of the air carrier : With an emphasis upon liability of passenger (항공운송인의 손해배상책임 원인에 관한 법적 고찰 - 여객 손해배상책임을 중심으로 -)

  • So, Jae-Seon;Lee, Chang-Kyu
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.28 no.2
    • /
    • pp.3-35
    • /
    • 2013
  • Air transport today is a means of transport that is optimized for exchanges between nations. Around the world, has experienced an increase in operating and the number of airline route expansion that has entered into the international aviation agreements in order to take advantage of the air transport efficient, but the possibility of the occurrence of air transport accidents increased. When compared to the accident of other means of transport, development of air transport accidents, not high, but it leads to catastrophe aviation accident occurs. Air Transport accident many international transportation accident than domestic transportation accident, in the event of an accident, the analysis of the legal responsibility of the shipper or the like is necessary or passenger air carrier. Judgment of the legal order of discipline of air transport accident is a classification of the type of air transport agreement. Depending on the object, air transport agreements are classified into the contract of carriage of aviation of the air passenger transportation contract. For casualties occurs, air passenger transportation accident is a need more discussion of legal discipline for this particular. Korean Commercial Code, it is possible to reflect in accordance with the actual situation of South Korea the contents of the treaty, which is utilized worldwide in international air transport, even on the system, to control land, sea, air transport and welcoming to international standards. However, Korean Commercial Code, the problem of the Montreal Convention has occurred as it is primarily reflecting the Montreal Convention. As a cause of liability for damages, under the Commercial Code of Korea and the contents of the treaty precedent is reflected, the concept of accident is necessary definition of the exact concept for damages of passengers in particular. Cause of personal injury or death of passengers, in the event of an accident to the "working for the elevation" or "aircraft" on, the Montreal Convention is the mother method of Korea Commercial Code, liability for damages of air carrier defines. The Montreal Convention such, continue to be a matter of debate so far in connection with the scope of "working for the lifting of" the concepts defined in the same way from Warsaw Convention "accident". In addition, it is discussed and put to see if you can be included mental damage passenger suffered in air transport in the "personal injury" in the damage of the passenger is in the range of damages. If the operation of aircraft, injury accident, in certain circumstances, compensation for mental damage is possible, in the same way as serious injury, mental damage caused by aviation accidents not be able to live a normal life for the victim it is damage to make. So it is necessary to interpret and what is included in the injury to the body in Korea Commercial Code and related conventions, non-economic damage of passengers, clearly demonstrated from the point of view of prevention of abuse of litigation and reasonable protection of air carrier it must compensate only psychological damage that can be. Since the compensation of delay damages, Warsaw Convention, the Montreal Convention, Korea Commercial Code, there are provisions of the liability of the air carrier due to the delayed arrival of passenger and baggage, but you do not have a reference to delayed arrival, the concept of delay arrangement is necessary. The strict interpretation of the concept of delayed arrival, because it may interfere with safe operation of the air carrier, within the time agreed to the airport of arrival that is described in the aviation contract of carriage of passenger baggage, or, these agreements I think the absence is to be defined as when it is possible to consider this situation, requests the carrier in good faith is not Indian or arrive within a reasonable time is correct. The loss of passenger, according to the international passenger Conditions of Carriage of Korean Air, in addition to the cases prescribed by law and other treaties, loss of airline contracts, resulting in passengers from a service that Korean Air and air transport in question do damage was is, that the fact that Korean Air does not bear the responsibility as a general rule, that was caused by the negligence or intentional negligence of Korean Air is proof, negligence of passengers of the damage has not been interposed bear responsibility only when it is found. It is a clause in the case of damage that is not mandated by law or treaty, and responsible only if the negligence of the airline side has been demonstrated, but of the term negligence "for" intentional or negligent "Korean Air's Terms" I considered judgment of compatibility is required, and that gross negligence is appropriate. The "Korean Air international passenger Conditions of Carriage", airlines about the damage such as electronic equipment that is included in the checked baggage of passengers does not bear the responsibility, but the loss of baggage, international to arrive or depart the U.S. it is not the case of transportation. Therefore, it is intended to discriminate unfairly passengers of international flights arriving or departure to another country passengers of international flights arriving or departure, the United States, airlines will bear the responsibility for the goods in the same way as the contents of the treaty it should be revised in the direction.

  • PDF

A Study on the Physico-Chemical Characteristics of Acid Sulfate Soil in Kimhae Plain (김해평야(金海平野)에 분포(分布)된 특이산성토(特異酸性土)(답)(沓)의 이화학적성질(理化學的性質)에 관(關)한 조사연구(調査硏究))

  • Park, N.J.;Park, Y.S.
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.2 no.1
    • /
    • pp.15-26
    • /
    • 1969
  • The study on physico-chemical characteristics of the acid sulfate soil present in Kimhae plain was carried out with 28 surface and subsoils from lower and higher produtive area and two representative profile samples from the areas reclaimed a few decades ago and around 10 years ago respectively. 1. There are no differences in soil texture between lower and higher productive soils being mostly silty clay loam and silty clay. 2. Very significant differences in pH, degree of base saturation and extractable aluminium content are observed; lower pH, lower degree of base saturation and higher aluminium in the lower productive soils and subsoils. The pH and degree of base saturation of these soils are extremely low whereas aluminium content is very high compared to ordinary paddy soil. 3. Cation exchange capacity of these soils are slightly higher than ordinary paddy soils. In higher productive soils, exchangeable calcium and magnesium are of same order, whereas in lower productive soils magnesium content is appreciably higher than calcium. 4. Though the soil is derived from marine and estuarine sediment, the soluble salt content is not high. There are only few lower productive surface soils and subsoils having Ec values of the saturation extracts higher than 4 mmhos but lower than 9 mmhos/cm. 5. Organic matter content of these soils is a bit higher compared to ordinary paddy soils, but, nitrogen content is comparatively low. C/N ratio of these soils is around 12. 6. Sulfur content is considerably higher but oxidizable sulfur is found to be very low. Total sulfur is generally high in subsoils and lower productive soils. 7. Active iron and available silica are slightly higher than ordinary paddy soils but easily reducible manganese is very low. Almost no differences are also observed between lower and higher productive soils. 8. Available phosphorus content is extremely low in particular, regardless of higher or lower productive soils. 9. The two representative profiles from the area of earlier reclamation and recent one show that samples from earlier reclaimed area contain less amount of free acids, sulfur compounds, toxic aluminium and soluble salts etc. than the other. This indicate greater leaching and possible addition of lime for a longer period of time. 10. From the results obtained, it can be concluded the higher productivity of group I soils is due to the greater leaching and neutralisation of acidity by liming materials, It can also be concluded that the productivity of both types can be increased by addition of liming materials and improvement of drainage facilities.

  • PDF

Essay on Form and Function Design (디자인의 형태와 기능에 관한 연구)

  • 이재국
    • Archives of design research
    • /
    • v.2 no.1
    • /
    • pp.63-97
    • /
    • 1989
  • There is nothing more important than the form and function in design, because every design product can be done on the basis of them. Form and Function are already existed before the word of design has been appeared and all the natural and man-made things' basic organization is based on their organic relations. The organic relations is the source of vitality which identifies the subsistance of all the objects and the evolution of living creatures has been changed their appearances by the natural law and order. Design is no exception. Design is a man-made organic thing which is developed its own way according to the purposed aim and given situations. If so, what is the ultimate goal of design. It is without saying that the goal is to make every effort to contribute to the -human beings most desirable life by the designer who is devoting himself to their convenience and well-being. Therefore, the designer can be called the man of rich life practitioner. This word implies a lot of meanings since the essence of design is improving the guality of life by the man-made things which are created by the designer. Also, the things are existed through the relations between form and function, and the things can keep their value when they are answered to the right purpose. In design, thus, it is to be a main concern how to create valuable things and to use them in the right way, and the subject of study is focused on the designer's outlook of value and uk relations between form and function. Christopher Alexander mentioned the importance of form as follows. The ultimate object of design is form. Every design problem begins with an effort to achieve fittness between the form and its context. The form is the solution to the problem: the context defmes the problem. In other words, when we speak of design, the real object of discussion is not form alone, but the ensemble comprising the form and its context. Good fit is a desirable property of this ensemble which relates to some particular division of the ensemble into form and context. Max Bill mainatined how important form is in design. Form represents a self-contained concept, and its embodiment in an object results in that object becoming a work of art. Futhermore, this explains why we use form so freguently in a comparative sense for determining whether one thing is less or more beautiful than another, and why the ideal of absolute beauty is always the standard by which we appraise form, and through form, art itself. Hence form has became synonymous with beauty. On the other hand, Laszlo Moholy-Nagy stated the importance of function as follows. Function means the task an object is designed to fulfill the task instrument is shaping the form. Unfortunately, this principle was not appreciated at the same time but through the endeavors of Frank Lloyd Wright and of the Bauhaus group and its many collegues in Europe, the idea of functionalism became the keynote of the twenites. Functionalism soon became a cheap slogan, however, and its original meaning blurred. It is neccessary to reexamine it in the light of present circumstances. Charles William Eliot expressed his idea on the relations between function and beauty. Beauty often results chiefly from fittness: indeed it is easy to manitain that nothing is fair except what is fit its uses or functions. If the function of the product of a machine be useful and valuable, an the machine be eminently fit for its function, it conspicuously has the beauty of fittness. A locomotive or a steamship has the same sort of beauty, derived from the supreme fittness for its function. As functions vary, so will those beauty..vary. However, it is impossible to study form and function in separate beings. Function can't be existed without form, and without function, form is nothing. In other words, form is a function's container, and function is content in form. It can be said that, therefore, the form and function are indispensable and commensal individuals which have coetemal relations. From the different point of view, sometimes, one is more emphasized than the other, but in this case, the logic is only accepted on the assumption of recognizing the importance of the other's entity. The fact can be proved what Frank Hoyd wright said that form and function are one. In spite of that, the form and function should be considered as independent indivisuals, because they are too important to be treated just as the simple single one. Form and function have flexible properties to the context. In other words, the context plays a role as the barometer to define the form and function, also which implies every meaning of surroun'||'&'||'not;dings. Thus, design is formed under the influence of situations. Situations are dynamic, like the design process itself, in which fixed focus can be cripping. Moreover, situations control over making the good design. Judging from the respect, I defined the good design in my thesis An Analytic Research on Desigh Ethic, "good design is to solve the problem by the most proper way in the situations." Situations are changeable, and so is design. There is no progress without change, but change is not neccessarily progress. It is highly desirable that there changes be beneficial to mankind. Our main problem is to be able to discriminate between that which should be discarded and that which should be kept, built upon, and improved. Form and Function are no exception. The practical function gives birth to the inevitable form and the $$\mu$ti-classified function is delivered to the varieties of form. All of these are depended upon changeable situations. That is precisely the situations of "situation de'||'&'||'not;sign", the concept of moving from the design of things to the design of the circumstances in which things are used. From this point of view, the core of form and function is depended upon how the designer can manage it efficiently in given situations. That is to say that the creativity designer plays an important role to fulfill the purpose. Generally speaking, creativity is the organization of a concept in response to a human need-a solution that is both satisfying and innovative. In order to meet human needs, creative design activities require a special intuitive insight which is set into motion by purposeful imagination. Therefore, creativity is the most essential quality of every designer. In addition, designers share with other creative people a compulsive ingenuity and a passion for imaginative solutions which will meet their criteria for excellence. Ultimately, it is said that the form and function is the matter which belongs to the desire of creative designers who constantly try to bring new thing into being to create new things. In accordance with that the main puppose of this thesis is to catch every meaning of the form and function and to close analyze their relations for the promotion of understanding and devising practical application to gradual progression in design. The thesis is composed of four parts: Introduction, Form, Function and Conclusion. Introduction, the purpose and background of the research are presented. In Chapter I, orgin of form, perception of form, and classification of form are studied. In Chapter II, generation of function, development of function, and diversification of function are considered. Conclusion, some concluding words are mentioned.ioned.

  • PDF