• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.506-509
• /
• 2001

A high power U.P.S system utilizing the parallel connection of low power U.P.S is developed. For the purpose of elimination the circular current between U.P.S.s, a digital circuit is employed. Furthermore a double phase synchronization and an interphase reactor are used to eliminate the circular current and the voltage ripples caused by the system parameter unbalances of parall connected U.P.S.s. The digital controller is implemented with ADSP21061 as aspect of a functional convenience.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1417-1422
• /
• 2014

Using a parallel plate DC plasma system was prepared. Using this equipment, we investigated the basic discharge characteristics of DC argon plasma in terms of electron density, temperature, voltage and current waveforms and plasma potential. The effects of the electrode gap distance, input voltage, ballast resistance and pressure were measured using electrostatic probe. Plasma simulation using fluid approximation has been performed. External circuit effects was included in the simulation. Measured and calculated current voltage characteristics show similar tendencies.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1222-1223
• /
• 2007

This paper suggests a 6-pulse-shift converter with PWM current-source inverter based on buck-boost configuration to improve the efficiency and to reduce the switching frequency of inverter for photovoltaic generation system, the device can be operated as interface system between solar module system and power system grid without energy storage cell. the circuit has six current-source buck-boost converter which operate chopper part has one full bridge inverter which make a decision the polarity of AC output. Therefore, the proposed PWM power inverter has advantages such as the reduction of witching loss and realization of unity power factor operation. the theoretical backgrounds are discussed and the input-output characteristics for the implemented prototype inverter using TMS320F2812 are verified experimentally in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.974-980
• /
• 1997

The 23GHz 1-state LNA was designed by using MPIE numerical analysis and conventional design EEsof softwares. The circuit was designed using conventional tools but analyzed and modified by using numerical MPIE tools. he matching sections was designed with parallel coupled filter-type, which gives impedance matching and DC blocking and has small discontinuities. THe FET chip is directly attached to the graound metal. The designed LNA gives 5.8dB gain and 2.5dB noise figure withoug considering the loss and impedance shift of connectors that degenerate the gain and noise figure considerably. this results gives very promising characteristics for our design process and matching schemes and fabrication technologies.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1503-1505
• /
• 2005

The Cold cathode fluorescent lamp(CCFL) are widely used to illuminate the liquid crystal display(LCD). Ballasts are required for CCFL because the lamp need high starting voltage and behave negative dynamic resistant characteristics in the desired region of operation. Dimming methods of CCFL are used to pulse frequency modulation(PFM) or pulse width modulation(PWM). In this paper, CCFL driving and control circuit is designed by half-bridge type series and parallel resonant inverter that variable frequency modulation method to control the output voltage current. The validity of this study is confirmed from the simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.137-140
• /
• 1998

A new SPWM inverter using three-phase boost converter by auxiliary partial resonant with high power factor and high efficiency is proposed. The proposed boost converter is constructed by using a resonant network in parallel with the switch of the conventional boost converter. The devices are switched at zero voltage or zero current eliminating the switching loss. A new Partial resonant boost converter achieves zero-voltage switching (ZVS) or zero-current switching (ZCS) for all switch devices without increasing their voltage and current stresses. This paper introduces elimination of low-order harmonics compared with conventional SPWM inverter and SPWM inverter using three-phase boost converter by auxiliary Partial resonant.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.169-177
• /
• 1990

We have constructed the laser system which was consisted of a high voltage pulse poner supply, a rapid high voltage spark gap and the Blumlein transmission line circuit of the multiple parallel plate capacitor type, and have studied the self-preionization effect from this laser system without additional modifications. The value of inductive or resistive loading of the laser oscillator seems to have a significant effect on the preionization. The optimal operational condition of this laser system was obtained at the inductive loading of L = I mtl across the laser tube with the spark gap distance of 6.0 mm. nitrogen pressure of 50 torr, when repetition rate was 70 Hz. Stability was found to be better than 2.0Yo and EIP was 867 V/cm.torr.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.92-98
• /
• 2008

The target of this paper is to study on the usefulness of the SSHI technique as a wireless electrical power supply when it is driven by mechanical vibrations of low frequency. A THUNDER series a piezoelectric material (TH7-R), which has been developed by a NASA engineer is selected for this study. A mechanical motion vibrator supplies piezoelectric material with mechanical energy. An optical fiber sensor and a pulse generating circuit are used to accomplish the parallel-SSHI technique. As a result of this study, energy harvesting using SSHI technique results in a significant increase of the electrical power flow.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.77-78
• /
• 2015

본 논문에서는 병렬 연결된 계통연계 인버터용 LCL 필터의 수동 댐핑 회로의 설계 및 분석을 진행한다. 인버터가 병렬연결 되었을 경우, 순환전류로 인한 LCL 필터 및 수동 댐핑 회로의 특성이 변하게 된다. 기존의 수동 댐핑 회로에 대한 연구는 주로 단일 인버터 구성을 기준으로 진행되었기 때문에 병렬 연결 된 인버터의 LCL 필터에 적용하기에 어려움이 있다. 따라서 본 논문에서는 병렬 연결된 수동 댐핑 회로를 포함한 LCL 필터의 특성을 분석하고 분석한 내용을 토대로 병렬 연결 된 LCL 필터의 수동 댐핑 회로를 설계한다.

• Journal of the Korea Society for Simulation
• /
• v.10 no.3
• /
• pp.59-70
• /
• 2001

Typical low-level image processing tasks require thousands of operations per pixel for each input image. Traditional general-purpose computers are not capable of performing such tasks in real time. Yet important features of traditional computers are not exploited by low-level image processing tasks. Since storage requirements are limited to a small number of low-precision integer values per pixel, large hierarchical memory systems are not necessary. The mismatch between the demands of low-level image processing tasks and the characteristics of conventional computers motivates investigation of alternative architectures. The structure of the tasks suggests employing an array of processing elements, one per pixel, sharing instructions issued by a single controller. In this paper we implemented various image processing filtering using the format converter. Also, we realized from conventional gray image process to color image process. This design method is based on realized the large processor-per-pixel array by integrated circuit technology This format converter design has control path implementation efficiently, and can be utilize the high technology without complicated controller hardware.