• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.366-370
• /
• 2003

This paper is on weighted model reduction using structurally balanced truncation. For a given weighted(single or double-sided) transfer function, a state space realization with the linear fractional transformation form is obtained. Then we prove that two block diagonal LMI(linear matrix inequality) solutions always exist, and it is possible to get a reduced order model with guaranteed stability and a priori error bound. Finally, two examples are used to show the validity of proposed weighted reduction method, and the method is compared with other existing methods.

• 호남수학학술지
• /
• 제32권2호
• /
• pp.271-281
• /
• 2010

Inspired by the reduction formulae between intersection numbers on Grassmannians obtained by Griffiths-Harris and the factorization theorem of Littlewood-Richardson coefficients by King, Tollu and Toumazet, eight reduction formulae has been discovered by the author and others. In this paper, we prove r = 1 reduction formula by constructing a bijective map between suitable sets of Littlewood-Richardson tableaux.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.444-451
• /
• 2007

In this paper, we propose an improved reduction model and a reduction model-based hybrid smith-predictor fuzzy controller. The transient and steady-state responsed of the reduction model was evaluated. In tuning the controller, the parameters of PID and the factors fuzzy controllers were obtained from the reduced model and by using genetic algorithms, respectively. Simulation examples demonstrated a better performance of the proposed controller than conventional ones.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.396-406
• /
• 2007

In this paper, we proposed development of improved model reduction and design of hierarchical controller using reduction model. The model reduction is considered that it is the transient response and the steady-state response through the use of nyquist curve. The hierarchical controller selected tuning of PID controller to ensure specified gain and phase margin and hybrid smith-predictor fuzzy controller using reduction model. Simulation examples are given to show the better performance of the proposed method than conventional methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.113-118
• /
• 2007

In this paper, a new method is proposed for robust proportional- integral - derivative (PID) control that is to ensure specified phase margin and iso - damping property using reduction model. This method is based on the second order plus dead time(SOPDT) reduction model of the high order model. Reduction model used to ensure iso-damping property in the feature frequency. Simulation results gives proof of effectiveness of proposed method.

• 조명전기설비학회논문지
• /
• 제25권5호
• /
• pp.34-38
• /
• 2011

The shorter the electric power line is, the less its cost becomes. In this paper, the Steiner tree is applied to find the shortest path of the electric power line to obtain resultant cost reduction. Up to 18.3[%] of length reduction can be expected compared to conventional method when the lines are connected through the Steiner points, which also can result in appreciable cost reduction.

• Computers and Concrete
• /
• 제19권6호
• /
• pp.725-736
• /
• 2017

This paper presents the two-, three-, and four-lane transverse reduction factor based on FEA method, probability theory, and the recently actual traffic flow data. A total of 72 composite girder bridges with various spans, number of lanes, loading mode, and bridge type are analyzed with time-varying static load FEA method by ANSYS, and the probability models of vehicle load effects at arbitrary-time point are developed. Based on these probability models, in accordance to the principle of the same exceeding probability, the multi-lane transverse reduction factor of these composite girder bridges and the relationship between the multi-lane transverse reduction factor and the span of bridge are determined. Finally, the multi-lane transverse reduction factor obtained is compared with those from AASHTO LRFD, BS5400, JTG D60 or Eurocode. The results show that the vehicle load effect at arbitrary-time point follows lognormal distribution. The two-, three-, and four-lane transverse reduction factors calculated by using FEA method and probability respectively range between 0.781 and 1.027, 0.616 and 0.795, 0.468 and 0.645. Furthermore, a correlation between the FEA and AASHTO LRFD, BS5400, JTG D60 or Eurocode transverse reduction factors is made for composite girder bridges. For the two-, three-, and four-lane bridge cases, the Eurocode code underestimated the FEA transverse reduction factors by 27%, 25% and 13%, respectively. This underestimation is more pronounced in short-span bridges. The AASHTO LRFD, BS5400 and JTG D60 codes overestimated the FEA transverse reduction factors. The FEA results highlight the importance of considering span length in determining the multi-lane transverse reduction factors when designing two-lane or more composite girder bridges. This paper will assist bridge engineers in quantifying the adjustment factors used in analyzing and designing multi-lane composite girder bridges.

• 펄프종이기술
• /
• 제41권3호
• /
• pp.8-12
• /
• 2009

According to a previous study, talc as a coating pigment can improve the viscosity and the water retention of coating color, the compressibility of coating layer, and hence gravure printability. Talc is also well known for its larger particle size than other pigments, which implies that less binder may be need due to its smaller specific surface area. This study investigated the possibility of reducing binder content for matte grade paper. Coating color was prepared with the Cotalc-2000, which showed the best properties in the previous study. The binder content was varied and the effect of binder content on the physical properties of coated paper and the gravure printability was investigated. It was shown that binder content could be reduced when talc was used as a coating pigment. The reduction in binder content did not influence gloss, roughness and the print density of coated paper but showed improvement in paper porosity, compressibility and missing dot.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.101-104
• /
• 2002

This paper propose that is algorithm of power dissipation reduction in the high level synthesis design for DSP(Digital Signal Processor), as the portable terminal system recently demand high power dissipation. This paper obtain effect of power dissipation reduction and switching activity that increase correlation of operands as input data of function unit. The algorithm search loop or repeatedly data to the input operands of function unit. That can be reduce the power dissipation using the new low power high level synthesis algorithm. In this Paper, scheduling operation search same nodes from input DFG(Data Flow Graph) with correlation coefficient of first input node and among nodes. Function units consist a multiplier, an adder and a register. The power estimation method is added switching activity for each bits of nodes. The power estimation have good efficient using proposed algorithm. This paper result obtain more Power reduction of fifty percents after using a new low power algorithm in a function unit as multiplier.

• 대한수학회논문집
• /
• 제11권3호
• /
• pp.539-546
• /
• 1996

The purpose of this paper is to show that the Noetherian semi-local property of the underlying ring enables us to develope a setisfactory concep of the theory of reduction of ideals in a commutative Noetherian ring.