• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.71-76
• /
• 2020

CO₂ concentration in kimchi package has emerged recently as a potential index of product ripening to be monitored or sensed in intelligent packaging. Considering that addition of CO₂ absorber into the flexible kimchi package changes behavior of its CO₂ concentration, ripening of kimchi in total acidity, package CO₂ concentration in partial pressure (P_CO2) and package volume at 10℃ were estimated by mathematical model for two size packages included with different CO₂ absorbers. In small size package containing 0.5 kg of kimchi, relatively less gas permeable low density polyethylene (LDPE) sachet of the absorber was found to give rise of P_CO2 linearly correlated with acidity at acceptable conditions of absorber amount and size. The levels of P_CO2 at optimum ripening were different with absorber amount. However, highly gas permeable microporous spunbonded film (Tyvek) sachet did not show the linear relationship except a condition of 1.5 g of CO₂ absorbent. In large size package containing 2.0 kg, absorber sachets of LDPE and Tyvek could give the linear relationship between product acidity and package P_CO2 but at different levels (P_CO2 of package with LDPE sachet: 0.46~0.79 bar, P_CO2 of package with Tyvek sachet: 0.00~0.75 bar). The P_CO2 at optimal ripening was found to be less variable with LDPE sachets than with Tyvek ones. Use of package CO₂ concentration as an indicator of kimchi ripening was shown to be possible on the limited conditions where the linear relationship between them is established or confirmed.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.109-119
• /
• 2003

o In order to start SIP Project .Marketing (& ASIC team) should present biz planning, schedule, device/SIP specs., in SIP TFT prior to request SIP development for package development project. .In order to prevent (PCB) revision, test, burn-in, & quality strategy should be fixed by SIP TFT (PE/Test, QA) prior to request for PKG development. .Target product price/cost, package/ test cost should be delivered and reviewed. o Minimum Information for PCB Design, Package Size, and Cost .(Required) package form factor: size, height, type (BGA, QFP), Pin count/pitch .(Estimated) each die size including scribe lane .(Estimated) pad inform. : count, pitch, configuration(in-line/staggered), (open) size .(Estimated) each device (I/O & Core) power (especially for DRAM embedded SIP) .SIP Block diagram, and net-list using excel sheet format o Why is the initial evaluation important\ulcorner .The higher logic power resulted in spec. over of DRAM Tjmax. This caused business drop longrightarrow Thermal simulation of some SIP product is essential in the beginning stage of SIP business planning (or design) stage. (i.e., DRAM embedded SIP) .When SIP is developed using discrete packages, the I/O driver Capa. of each device may be so high for SIP. Since I/O driver capa. was optimized to discrete package and set board environment, this resulted in severe noise problem in SIP. longrightarrow In this case, the electrical performance of product (including PKG) should have been considered (simulated) in the beginning stage of business planning (or design).

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.35-39
• /
• 2020

Nonwet (Head in Pillow) defect is one of the defects in SMT (surface mount technology) process, the defect is caused by several factors, such as solder paste misalignment, reflow condition, package warpage and package ball size. This paper focused on ① reflow condition ② package ball & solder paste misalignment ③ package ball size for nonwet experiment. The first, on the case of reflow condition, there would be high risk of nonwet defect when the soldering time was increased, but N₂ was adopted to reflow process, there could be no or low risk of nonwet defect because of oxidation barrier control. And when the contact depth between Solder ball and solder paste was below 20 ㎛, there could be high risk of nonwet defect. Also smaller package ball would have low risk of nonwet defect.

• Journal of Korean Society for Quality Management
• /
• v.28 no.2
• /
• pp.17-38
• /
• 2000

In application, sample size determination is one of the important problems in designing an experiment. A large amount of literature has been published on the problem of determining sample size and power for various statistical models. In practice, however, it is not easy to calculate sample size and/or power because the formula and other results derived from statistical model are scattered in various textbooks and journal articles. This paper describes some previously published theories that have practical relevance for sample size and power determination in various statistical problems, including life-testing problems with censored cases and introduces a statistical package which calculates sample size and power according to the results described. The screens and numerical results made by the package are demonstrated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.2158-2166
• /
• 1994

In order to understand the package crack emanating from the edge of leadframe after the delamination between leadframe and epoxy molding compound in an electronic packaging of surface mounting type, the M-integral and J-integral in fracture mechanics are obtained. The effects of geometry, material properties and molding process temperature on the package crack are investigated taking into account the temperature dependence of the material properties, which simulates a more realistic condition. If the temperature dependence of the material properties is considered the result of analysis conforms with observations that the crack is kinked at between 50 and 65 degree. However, in case of constant material properties at the room temperature it is found that the J-integral is underestimated and the kink crack angle is different form the observation. The effects of the material properties and molding process temperature on J-integral and crack angle are less significant that the chip size for the cases considered here. It is suggested that the geometric factors such as ship size, leadframe size are to be well designed in order to prevent(or control) the occurrence and propagation of the package crack.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.138-141
• /
• 2002

There are continuous efforts in the electronics industry to a reduced electronic package size. Reducing the size of electronic packages can be achieved by a variety of means, and for ball grid array(BGA) packages an effective method is to decrease the pitch between the individual balls. Chip scale package(CSP) and BGA are now one of the major package types. However, a reduced package size has the negative effect of reducing board-level reliability. The reliability concern is for the different thermal expansion rates of the two-substrate materials and how that coefficient CTE mismatch creates added stress to the BGA solder joint when thermal cycled. The point of thermal fatigue in a solder joint is an important factor of BGA packages and knowing at how many thermal cycles can be ran before failure in the solder BGA joint is a must for designing a reliable BGA package. Reliability of the package was one of main issues and underfill was required to improve board-level reliability. By filling between die and substrate, the underfill could enhance the reliability of the device. The effect of underfill on various thermomechanical reliability issues in $\mu$BGA packages is studied in this paper.

• Particle and aerosol research
• /
• v.9 no.4
• /
• pp.253-260
• /
• 2013

For a vertical atmospheric aerosol distribution measurement, a very compact and light particle sampling package is developed. This package includes a compact optical particle counter (Hy-OPC), a light and small condensation particle counter (Hy-CPC), sensors (GPS, wind velocity, temperature, humidity), and a communication and system control board. This package is attached to He balloon and the altitude is controlled by a winch. Using this system the vertical particle size distribution was measured. The test results showed that the ground base atmospheric particle measurement result may be a lot different from that high above the ground.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.185-192
• /
• 2012

p-n junction temperature and thermal resistance of Light Emitting Diode (LED) package are affected by the chip size due to the change of the thermal density and the external quantum efficiency considering the heat dissipation through conduction. In this study, forward voltage was measured for two different size LED chips, 24 mil and 40 mil, which consist constitute 16-chip package. p-n junction temperature and thermal resistance were determined by thermal transient analysis, which were discussed in connection with the electrical characteristics of the LED chip and the structure of the LED package.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.4 no.2
• /
• pp.20-28
• /
• 2008

According to IAEA regulations, a transportation package of radioactive material should perform its intended function of containing the radioactive contents after the drop test, which is one of hypothetical accident conditions. Impact limiters attached to a transport cask absorb the most of impact energy. So, it is appreciated to determine properly the shape, size and material of impact limiters. A material data needed in this determination is a dynamic one. In this study, several materials considered as those of impact limiters were tested by a drop weight facility to acquire dynamic material characteristics data. Impact absorbing volume of the impact limiter was derived mathematically for each drop condition. A size optimization of impact limiter was conducted. The derived impact absorbing volumes were applied as constraints. These volumes should be less than critical volumes generated based on the dynamic material characteristics. The derived procedure to decide the shape of impact limiter can be useful at the preliminary design stage when the transportation package's outline is roughly determined and applied as input value.

• Korean Journal of Agricultural Science
• /
• v.39 no.1
• /
• pp.151-159
• /
• 2012

This paper analyzes the consumers' preference for packaged apple and derives the measures to vitalize the distribution of packaged apple. To do this, survey was conducted for consumers in large cities, Seoul, Busan, and Daegu to observe their purchasing behavior and satisfaction both for packaged and unpackaged apple. Survey was focused to how they are satisfied with several attributes of package such as size, appearance, content, material, and label. On the basis of the survey results, the values of the package attributes were estimated. Survey results show that consumers tend to buy unpackaged apple rather than packaged apple. About 34 percent out of 313 respondents have ever purchased apple packed with paper box while only 10.5 percent have an experience to buy packaged apple with transparent box. Most respondents answered they preferred the package of five to six apples and 1.3 kilograms most. They preferred mid or large size apple. Estimation of the values of the package attributes using the conjoint analysis shows that consumers are giving the highest value to the price of packing material. It means that consumers are reluctant to the extra payment resulted from packing the apple. Therefore, the efforts to reduce the cost of packing apple should be made steadily. In order to vitalize the distribution of small packaged apple, the package should contain high quality apple with high sugar content, proper size, good appearance, and so on. And it needs to be promoted to the consumers that small packaged apple are not inferior to apple packed with paper box.