• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.595-596
• /
• 2006

A novel Si via structure is suggested and fabricated for 3D MEMS package using the doped silicon as an interconnection material. Oxide isolations which define Si via are formed simultaneously when fabricating the MEMS structure by using DRIE and oxidation. Silicon Direct Bonding Multi-stacking process is used for stacked package, which consists of a substrate, MEMS structure layer and a cover layer. The bonded wafers are thinned by lapping and polishing. A via with the size of $20{\mu}m$ is fabricated and the electrical and mechanical characteristics of via are under testing.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.39-46
• /
• 2019

A stiffness-gradient soft PDMS/hard PDMS/FPCB stretchable package of the island-bridge structure was processed using the polydimethylsiloxane (PDMS) as the base substrate and the more stiff flexible printed circuit board (FPCB) as the island substrate, and its effective elastic modulus and stretchable deformation characteristics were analyzed. With the elastic moduli of the soft PDMS, hard PDMS, and FPCB to be 0.28 MPa, 1.74 MPa, and 1.85 GPa, respectively, the effective elastic modulus of the soft PDMS/hard PDMS/FPCB package was analyzed as 0.58 MPa. When the soft PDMS of the soft PDMS/hard PDMS/FPCB package was stretched to a tensile strain of 0.3, the strains occurring at hard PDMS and FPCB were found to be 0.1 and 0.003, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.563-568
• /
• 2007

In this paper, the proposed package antenna, which is meander line structure with short pin, is miniaturized to realize RF-SoP at 900 MHz RFID band. The RFID BGA(Ball Grid Array) chip is put in a cavity of LTCC Layers. The coupling and cross talk, which are happen between BGA chip and proposed package antenna, are reduced by faraday cage, which consists of ground and via fences, is realized to enhance the isolation between BGA chip and antenna. The proposed antenna structure is focused on the package level antenna realization at low frequency band. The novel proposed package antenna size is $13mm{\times}9mm{\times}3.51mm$. The measured resonance frequency is 0.893 GHz. The impedance bandwidth is 9 MHz. The maximum gain of radiation pattern is -2.36 dBi.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.135-145
• /
• 2006

This paper presents the theory, design, fabrication and characterization of the novel low actuation voltage capacitive shunt RF-MEMS switch using a corrugated membrane with HRS MEMS packaging. Analytical analyses and experimental results have been carried out to derive algebraic expressions for the mechanical actuation mechanics of corrugated membrane for a low residual stress. It is shown that the residual stress of both types of corrugated and flat membranes can be modeled with the help of a mechanics theory. The residual stress in corrugated membranes is calculated using a geometrical model and is confirmed by finite element method(FEM) analysis and experimental results. The corrugated electrostatic actuated bridge is suspended over a concave structure of CPW, with sputtered nickel(Ni) as the structural material for the bridge and gold for CPW line, fabricated on high-resistivity silicon(HRS) substrate. The corrugated switch on concave structure requires lower actuation voltage than the flat switch on planar structure in various thickness bridges. The residual stress is very low by corrugating both ends of the bridge on concave structure. The residual stress of the bridge material and structure is critical to lower the actuation voltage. The Self-alignment HRS MEMS package of the RF-MEMS switch with a $15{\Omega}{\cdot}cm$ lightly-doped Si chip carrier also shows no parasitic leakage resonances and is verified as an effective packaging solution for the low cost and high performance coplanar MMICs.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.4
• /
• pp.79-83
• /
• 2012

LTCC (Low temperature co-fired ceramic) package have been paid much attention due its good reliability, miniaturization, and application of silver paste with complex wiring and printing. Therefore, LTCC package has been expected to replace vulnerable plastic package in the field of high power LED device. Currently, LTCC ceramic package is mainly made up of aluminum oxide powder. In this study, zinc oxide powder is added or replaced for the fabrication of LTCC ceramic body. By adding small amount of ZnO, thermal conductivity of the LTCC ceramic body could be remarkably increased by 25% leading to the extension of LED life time. The LTCC package structure with composition including ZnO has an increased thermal flux by 56% as a result of ANSYS simulation. Actually, the fabricated LED package with the addition of ZnO exhibits a decreased thermal resistivity by 14.9%.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.235-240
• /
• 2007

A ceramic stem based TO package incorporating a coplanar waveguide feed-line has been proposed allowing for 10 Gbps grade data transmission. The frequency response of a cylindrical feed-line fer a conventional metal based TO package was first analyzed, and compared with that of the CPW feed-line used for a ceramic based package such as a butterfly package. For the case where a DFB LD chip is packaged to an LD module, the measured 3 dB frequency bandwidths for the conventional and proposed packages were 3.5 GHz and 7.8 GHz respectively, which agree well with the theoretical results obtained from the modeling based on the small signal equivalent circuits. Consequently, we proposed a novel ceramic based TO package with a CPW feed-line in ceramic material as a stem to improve the frequency characteristics of the conventional one. And, its performance was theoretically observed to confirm that the proposed package provides even wider frequency bandwidth compared to the conventional one.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.4
• /
• pp.1-10
• /
• 2015

The light emitting diodes(LED) package of new structure is proposed to promote the reliability and lifespan by maximize heat dissipation occurred on the chip. We designed and fabricated the LED packages mixing the advantages of chip on board(COB) based on conventional metal printed circuit board(PCB) and the merits of Si sub-mount using base as a substrate. The proposed LED package samples were selected for the superior efficiency of the material through the sealant properties, chip characteristics, and phosphor properties evaluations. Reliability test was conducted the thermal shock test and flux rate according to the usage time at room temperature, high-temperature operation, high-temperature operation, high-temperature storage, low-temperature storage, high-temperature and high-humidity storage. Reliability test result, the average flux rate was maintained at 97.04% for each items. Thus, the Si sub-mount based LED package is expected to be applicable to high power down-light type LED light sources.

• Journal of the Korean Society for information Management
• /
• v.32 no.3
• /
• pp.21-47
• /
• 2015

The construction of preservation metadata is a prerequisite for the preservation of digital information. In the current approaches to digital archiving, however, there is no metadata structure optimized to describe preserved digital objects. This research proposed metadata packages that can support the description of digital objects from the perspective of the core processes of digital archiving. The proposed metadata packages consist of 4 wrapper elements and 25 sub-elements. They can provide detailed descriptions required to preserve digital objects in accordance with the core processes of digital archiving. Therefore, the proposed metadata package can be applied to digital archiving as a better approach to the description of digital objects compared to the approaches to information package.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.185-192
• /
• 2012

p-n junction temperature and thermal resistance of Light Emitting Diode (LED) package are affected by the chip size due to the change of the thermal density and the external quantum efficiency considering the heat dissipation through conduction. In this study, forward voltage was measured for two different size LED chips, 24 mil and 40 mil, which consist constitute 16-chip package. p-n junction temperature and thermal resistance were determined by thermal transient analysis, which were discussed in connection with the electrical characteristics of the LED chip and the structure of the LED package.

• Plant Journal
• /
• v.13 no.3
• /
• pp.30-35
• /
• 2017

Module can be categorized as PAS(Pre-Assembled Steel structure), PAR(Pre-Assembled pipe Rack), PAU(Pre-Assembled Unit), VAU(Vendor Assembled Unit) and VPU(Vendor Package Unit). At the stage of design and fabrication of module, the condition of land and ocean transportation is considered and these conditions are reflected on the module division design. The control of the module's center of gravity is important to transport and install modules safely and the steel structure should have the strength enough to resist the sea acceleration force during the ocean transportation. The transportation condition and the installation method influence the size and weight of module. The size and weight of module are considered for the design of module division.