Journal of electromagnetic engineering and science

The Korean Institute of Electromagnetic Engineering and Science (한국전자파학회)
권호 표지

Low Actuation Voltage Capacitive Shunt RF-MEMS Switch Using a Corrugated Bridge with HRS MEMS Package

  • Song Yo-Tak (Department of Electrics Engineering, Ajou University) ;
  • Lee Hai-Young (Department of Electrics Engineering, Ajou University) ;
  • Esashi Masayoshi (Department of Nanomechanics, Graduate School of Engineering, Tohoku University)
  • Published : 2006.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the theory, design, fabrication and characterization of the novel low actuation voltage capacitive shunt RF-MEMS switch using a corrugated membrane with HRS MEMS packaging. Analytical analyses and experimental results have been carried out to derive algebraic expressions for the mechanical actuation mechanics of corrugated membrane for a low residual stress. It is shown that the residual stress of both types of corrugated and flat membranes can be modeled with the help of a mechanics theory. The residual stress in corrugated membranes is calculated using a geometrical model and is confirmed by finite element method(FEM) analysis and experimental results. The corrugated electrostatic actuated bridge is suspended over a concave structure of CPW, with sputtered nickel(Ni) as the structural material for the bridge and gold for CPW line, fabricated on high-resistivity silicon(HRS) substrate. The corrugated switch on concave structure requires lower actuation voltage than the flat switch on planar structure in various thickness bridges. The residual stress is very low by corrugating both ends of the bridge on concave structure. The residual stress of the bridge material and structure is critical to lower the actuation voltage. The Self-alignment HRS MEMS package of the RF-MEMS switch with a $15{\Omega}{\cdot}cm$ lightly-doped Si chip carrier also shows no parasitic leakage resonances and is verified as an effective packaging solution for the low cost and high performance coplanar MMICs.

Keywords

References

  1. J. J. Yao, 'RF MEMS from a device perspective', J. Micromech. Microeng., vol. 10, pp. R9-R38, 2000 https://doi.org/10.1088/0960-1317/10/4/201
  2. C. L. Goldsmith, Z. Yao, S. Eshelman, and D. Denniston, 'Performance of low-loss RF MEMS capacitive switches', IEEE Microwave Guided Wave Lett., vol. 8, no. 8, pp. 269-271, Aug. 1998 https://doi.org/10.1109/75.704410
  3. C. Goldsmith, J. Randall, S. Eshelman, T. H. Lin, D. Denniston, S. Chen, and B. Norvell, 'Characteristics of micromachined switches at microwave frequencies', IEEE MTT-S Int. Microwave Symp. Dig., San Francisco, CA, pp. 1141-1144, Jun. 1996
  4. J. J. Yao, M. F. Chang, 'A surface micromachined miniature switch for telecommunications applications with signal frequencies from DC up to 4 GHz', Int. Conf. Solid-State Sens. Actuators Dig., Stockholm, Sweden, pp. 384-387, Jun. 1995
  5. G. M. Rebeiz, J. B. Muldavin, 'RF MEMS switches and switch circuits', IEEE Microwave Mag., vol. 2, pp. 59-71, Dec. 2001 https://doi.org/10.1109/6668.969936
  6. E. R. Brown, 'RF-MEMS switches for reconfigurable integrated circuits', IEEE Trans. Microwave Theory Tech., vol. 46, pp. 1868-1880, Nov. 1998 https://doi.org/10.1109/22.734501
  7. K. E. Petersen, 'Dynamic micromechanics on silicon: techniques and devices', IEEE Trans. Electron Devices, vol. 25, no. 10, pp. 1241-1250, Oct. 1978 https://doi.org/10.1109/T-ED.1978.19259
  8. L. E. Larson, R. H. Hackette, and R. F. Lohr, 'Microactuators for GaAs-based microwave integrated circuits', Transducers'91 Int. Conf. Solid-State Sens. Actuators Dig., San Francisco, CA, pp. 743-746, Jun. 1991
  9. S. P. Pacheco, L. P. B. Katehi, and T. C. Nguyen, 'Design of low actuation voltage RF MEMS switch', IEEE MTT-S Int. Microwave Symp. Dig., pp. 165-168, 2000
  10. Z. J. Yao, S. Chen, S. Eshelman, D. Denniston, and C. Goldsmith, 'Micromachined low-loss microwave switches', IEEE J. Microelectromech. Syst., vol. 8, no. 2, pp. 129-134, Jun. 1999 https://doi.org/10.1109/84.767108
  11. D. Peroulis, K. Sarabandi, and L. P. B. Katehi, 'Low contact resistance series MEMS switches', IEEE MTT-S Int. Microwave Symp. Dig., pp. 223-226, 2002
  12. S. Duffy, C. Bozler, S. Rabe, J. Knecht, L. Travis, P. Wyatt, C. Keast, and M. Gouker, 'MEMS microswitches for reconfigurable microwave circuitry', IEEE Microwave Wireless Comp. Lett., vol. 11, pp. 106-108, Mar. 2001 https://doi.org/10.1109/7260.915617
  13. J. B. Muldavin, G. M. Rebeiz, 'High-isolation CPW MEMS shunt switches-part 1: modeling', IEEE Trans. Microwave Theory and Techniques, vol. 48, no. 6, pp. 1045-1052, Jun. 2000 https://doi.org/10.1109/22.904743
  14. D. Hyman, M. Mehregany, 'Contact physics of gold microcontacts for MEMS switches', IEEE Trans. Comp. Packag. Technol., vol. 22, no. 3, pp. 357-364, Sep. 1999 https://doi.org/10.1109/6144.796533
  15. M. Kim, J. B. Hacker, R. E. Mihailovich, and J. F. DeNatale, 'A DC-to-40 GHz four-bit RF-MEMS true-time delay network', IEEE Microwave Wireless Comp. Lett., vol. 11, no. 2, pp. 56-58, Feb. 2001 https://doi.org/10.1109/7260.914301
  16. J. Y. Park, G. H. Kim, K. W. Chung, and J. U. Bu, 'Monolithically integrated micromachined RF MEMS capacitive switches', Sens. Actuators A, vol. 89, pp. 88-94. 2001 https://doi.org/10.1016/S0924-4247(00)00549-5
  17. F. Plotz, S. Michaelis, R. Aigner, H. J. Timme, J. Binder, and R. Noe, 'A low-voltage torsional actuator for application in RF-microswitches', Sens. Actuators A, vol. 92, pp. 312-317, 2001 https://doi.org/10.1016/S0924-4247(01)00589-1
  18. J. M. Huang, K. M. Liew, C. H. Wong, S. Rajendran, M. J. Tan, and A. Q. Liu, 'Mechanical design and optimization of capacitive micromachined switch', Sens. Actuators A, vol. 93, pp. 273-285, 2001 https://doi.org/10.1016/S0924-4247(01)00662-8
  19. W. P. Taylor, M. G. Allen, 'Integrated magnetic microrelays: normally open, normally closed, and multi-pole devices', Transducers'97 Int. Conf. Solid-State Sens. Actuators Dig., Chicago, pp. 1149-1152, Jun. 1997
  20. H. A. C. Tilmans, E. Fullin, H. Ziad, M. D. J. Van de peer, J. Kesters, E. V. Geffen, J. Bergqvist, M. Pantus, E. Beyne, K. Baert, and F. Naso, 'A fully-packaged electromagnetic microrelay', IEEE Micro Electro Mechanical Systems, Orlando, Florida, Jan. 1999
  21. X. Q. Sun, K. R. Farmer, and W. N. Carr, 'A bistable microrelay based on two-segment multimorph cantilever actuators', IEEE Micro Electro Mechanical Systems, Heidelberg, Germany, Jan. 1998
  22. L. E. Larson, R. H. Hackett, M. A. Melendes, and R. F. Lohr, 'Micromachined microwave actuator (MIMAC) technology- a new tuning approach for microwave integrated circuits', IEEE MTT-S Int. Microwave Symp. Dig., pp. 27-30, Jun. 1991
  23. K. J. Rangra, F. Giacomozzi, B. Margesin, L. Lorenzelli, V. Mulloni, C. Collini, R. Marcelli, and G. Soncini, 'Micromachined low actuation voltage RF MEMS capacitive switches, technology and characterization', Int. Semiconductor Conf., 2004
  24. S. A. Frang, E. A. Sani, 'A low voltage capacitive micromachined microwave switch', ICSE, Penang, Malaysia, pp. 110-114, Dec. 2002
  25. P. R. Scheeper, W. Olthuis, and P. Bergveld, 'The design, fabrication, and testing of corrugated silicon nitride diaphragms', J. Microelectromechanical Syst., vol. 3, no. 1, pp. 36-42, 1994 https://doi.org/10.1109/84.285722
  26. M. Fuldner, A. Dehe, and R. Lerch, 'Analytical analysis and finite element simulation of advanced membranes for silicon microphones', IEEE Sensors Journal, vol. 5, no. 5, pp. 857-863, Oct. 2005 https://doi.org/10.1109/JSEN.2004.841449
  27. H. Yan, E. S. Kim, 'Corrugated diaphragm for piezoelectric microphone', IEEE EFTA, pp. 503-506, 1996
  28. M. Giovanni, Flat and Corrugated Diaphragm Design Handbook, Marcel Dekker Inc., New York, 1982
  29. D. L. Logan, Mechanics of Materials, Harper Collins Publishers, New York, 1991
  30. J. M. Gere, S. P. Timoshenko, Mechanics of Materials, 4th Edition, PWS Publishing Company, Boston, 1997
  31. W. C. Young, R. G. Budynas, Roark's Formulas for Stress and Strain, 7th Edition, McGraw-Hill, New York, 2002
  32. G. M. Rebeiz, RF MEMS Theory, Design, and Technology, John Wiley & Sons Inc., New Jersey, 2003
  33. Y. T. Song, H. Y. Lee, and M. Esashi, 'Resonance-free millimeter-wave coplanar waveguide Si microelectromechanical system package using a lightly-doped silicon chip carrier', Japanese Journal of Applied Physics, vol. 44, no. 4A, pp. 1693-1697, 2005 https://doi.org/10.1143/JJAP.44.1693
  34. Y. T. Song, H. Y. Lee, and M. Esashi, 'Parasitic leakage resonance-free HRS MEMS package for microwave and millimeter-wave', Sensors and Actuators A, vol. 126, pp. in press, 2006
  35. Y. T. Song, H. Y. Lee, and M. Esashi, 'Low actuation voltage capacitive shunt RF-MEMS switch having a corrugated bridge', IEICE Trans. Electron., accepted, Jun. 2006
  36. Y. T. Song, H. Y. Lee, and M. Esashi, 'A corrugated bridge of low residual stress for RFMEMS switch', Sensors and Actuators A, under review, Apr. 2006