• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.502-509
• /
• 2014

Carbon-based nanoplatelets such as graphene oxide (GO) sheets and graphite nanoplatelets (GNPs) are frequently used as conductive nanofillers for polymer nanocomposites. In this study, polystyrene (PS)/GO and PS/GNP nanocomposites were prepared through a latex technology and investigated to compare the effect of nanofillers on rheological and electrical properties of the PS nanocomposites. PS particles were prepared by emulsifier-free emulsion polymerization and GO was synthesized by using the modified Hummers' method from graphite. Hydrophilic GO was dispersed in aqueous PS suspension, but hydrophobic GNPs were dispersed with the help of a surfactant. In comparison with PS/GO nanocomposites, the rheological properties of PS/GNP counterparts were not too high because GNP existed in aggregates of graphene layers. Conducting pathways of PS/GO and PS/GNP nanocomposites were achieved at the electrical percolation threshold of 0.50 and 5.82 wt%, respectively. The reason for enhanced electrical conductivity in PS/GO nanocomposites is that GO was thermally reduced during molding.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.444-449
• /
• 2010

In this study, the petroleum sulfonate(PS) was synthesized from pyolyzed fuel oil by sulfonation reaction with sulfuric acid. The PS synthesized had surfactant behaviors relating to the interfacial properties such as surface tension, surface adsorption, and wetting, etc. These interfacial properties were affected by the sulfonation ratio in the synthesis. As the sulfonation ratio increased, the surface tension of the PS aqueous solution decreased. However, when the ratio was too high, the surface tension was increased due to the extremely higher value of hydrophilicity of PS. At the optimum sulfonation ratio, the PS had a good wettability on the cement particles and a good fluidity of the cement mortar with a high adsorption.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.555-561
• /
• 2024

This paper derives material properties of steel bars that simulate the distribution of stress and strain of prestressed tendons used in Prestressed concrete(PSC) girders and presents an optimal material model. ABAQUS software was used to establish the 3D solid model of the PSC girder and strand wire rope for a PS(Prestressed) tendon. Then the model of steel wire rope was imported into the Isight interface plugin directly through the ABAQUS and the Data Matching. In ABAQUS, the contact pairs were established, the models were meshed, the constraints were applied to solve the finite element model and an axial tension of 0.5m/s was loaded to analyze the stress and deformation distributions in the normal working range of the PS strand wire rope. In Data Matching, classical experimental data is fitted to the optimal material properties through finite element analysis and multi-objective optimization. The results show that the steel bar with optimal material properties presents a similar linear area and stress distribution with the PS tendon.

• Animal Bioscience
• /
• v.36 no.11
• /
• pp.1738-1746
• /
• 2023

Objective: The aim of this study was to investigate quality characteristics of reduced-salt, low-fat pork sausage (PS) using pre-rigor muscle and sea tangle extract (STE) to reduce salt level of sausages during refrigerated storage. Methods: Pork ham was prepared with pre-rigor and post-rigor muscle from the local market. Sausages using post-rigor muscle were manufactured with the 1.5% of salt content, and samples with pre-rigor muscle were processed by different salt concentrations (0.8%). Accordingly, PSs were prepared in 4 treatments (REF, PS with 1.5% of salt using post-rigor muscle; CTL, PS with 0.8% of salt using pre-rigor muscle; TRT1, PS with 0.8% of salt and 5% of STE using pre-rigor muscle; TRT2, PS with 0.8% of salt and 10% of STE using pre-rigor muscle). For the evaluation of quality characteristics and shelf-life of reduced-salt PS, pH and color values, cooking loss (%), expressible moisture (%), textural properties, lipid oxidation (thiobarbituric reactive substances), protein denaturation (volatile basic nitrogen), and microbiological analysis (total plate counts and Enterobacteriaceae counts) were determined. Results: The pH and temperature of pre-rigor raw pork ham were higher than those of post-rigor pork ham. Hardness of TRT2 was higher than that of REF or CTL. TRT2 had higher gumminess and chewiness than CTL. TRT1 and TRT2 had lower volatile basic nitrogen than CTL. Total plate counts of TRT2 were lower than those of CTL. Expressible moisture values of TRT1 and TRT2 were similar to those of REF. The addition of STE into PS improved functional properties and shelf-life of PS. Conclusion: Reduced-salt PS containing pre-rigor muscle and STE had similar functional properties to those of regular-salt ones, while containing approximately 47% less salt compared to regular-salt level.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.468-474
• /
• 2015

Electrically conductive polymer nanocomposites were prepared by the inclusion of graphene-based nanofillers. Graphene oxide (GO) and reduced graphene oxide wrapped by poly(styrene sulfonate) (PSS-RGO) were used as nanofillers to make good dispersion with the aqueous dispersion of polystyrene (PS) particles. GO sheets were synthesized by the modified Hummers' method from graphite, and PSS-RGO sheets were prepared by the reduction of GO-dispersed PSS solution with hydrazine monohydrate. Morphology and properties of PS/GO and PS/PSS-RGO nanocomposites via latex technology were investigated. Both nanofillers showed well dispersed morphology in PS matrix. Rheological and electrical percolation thresholds were 0.28 and 0.51 wt% for GO, and 0.50 and 1.01 wt% for PSS-RGO respectively. It is speculated that PS/GO nanocomposites showed better conductivity than PS/PSS-RGO counterparts due to the partial recovery of GO by thermal reduction during molding.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.451-457
• /
• 2011

The effect of latex particle size on rheological and electrical properties of latex-blended polystyrene (PS)/multi-walled carbon nanotube (MWCNT) nanocomposites was investigated. Mono-dispersed PS particles synthesized either by emulsifier-free emulsion polymerization or by dispersion polymerization were mixed with MWCNTs under ultrasonication, and freeze-dried to prepare the nanocomposites. As the MWCNT content increased, storage modulus, complex viscosity and electrical conductivity were substantially increased. The increase of storage modulus and complex viscosity was higher for larger PS particles. The effect of particle size on electrical properties was different depending on MWCNT content. With lower MWCNT content, the nanocomposite prepared by smaller PS particles showed higher electrical conductivity, but the opposite result was given as the content increased.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.534-539
• /
• 2010

Polystyrene (PS)/multi-walled carbon nanotube (MWCNT) nanocomposites were prepared via latex technology and the effect of nanotube length on rheological properties were investigated. Monodisperse PS particle was synthesized by the emulsifier-free emulsion polymerization and two types of MWCNTs were used after surface modification to improve dispersion state and to remove impurities. Final nanocomposites were prepared by the freeze-drying process after dispersing the PS particles and the surface-modified MWCNTs in a ultrasonic bath. The effects of MWCNT content and nanotube length on rheological properties were evaluated by imposing the small-amplitude oscillatory shear flow. The PS/MWCNT nanocomposites showed that rheological properties were enhanced as the amount and length of MWCNT increased. It is speculated that the rheological characteristics of nanocomposites change from liquid-like to solid-like as the MWCNT amount increases, and the critical concentration to achieve network structure decreases as the nanotube length increases.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.767-773
• /
• 2014

Rheological and electrical properties of polystyrene (PS)/carbon nanotube (CNT) nanocomposites via coagulated precipitation were investigated. Chemical modification and surfactant wrapping of CNT to improve the dispersion of CNTs may reduce the intrinsic properties of pristine CNT. To avoid this problem, PS and CNTs were dissolved and dispersed in dimethylformamide and then PS/CNT nanocomposites were prepared by the coagulated precipitation of CNT-dispersed PS solution in water. The coagulated precipitation method was highly effective enhancing the electrical conductivity of nanocomposites. Furthermore, the effect of adding poly(styrene-co-divinylbenzene) crosslinked particles to PS matrix on the rheological and electrical properties was investigated. With the addition of the crosslinked particles, the electrical percolation threshold of CNT reduced to 0.25 wt% and electrical conductivity increased further. It is speculated that CNTs in the volume occupied by crosslinked particles helped electrical pathway formation.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.342-349
• /
• 2018

Polystyrene (PS) was coated on carbonyl iron (CI) particles via dispersion polymerization to produce core-shell structured CI/PS particles and adopted as magnetorheological (MR) material. Two MR fluids were prepared by dispersing CI/PS and CI particles in silicone oil. Their MR and tribological properties were investigated using a rheometer and a reciprocating friction and wear tester, respectively. Experimental data showed that tribological properties of MR fluid based on CI/PS particles are significantly enhanced compared to those of CI based MR fluid. Sedimentation problem of CI/PS MR fluid was also expected to be improved due to relatively lower density of CI/PS particles.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.8-13
• /
• 2005

Polystyrene (PS) particles containing the phase change material (PCM) were synthesized by miniemulsion polymerization. The polymer particles prepared with different parameters were investigated in terms of average particle size, particle distribution, and latent heat storage of encapsulated paraffin wax (PW) as PCM. The morphology and particle features of PS particles were analyzed by scanning electron microscope and particle size analyzer, respectively. As a result, the diameters of PS particles were adjusted with manufacturing conditions. The stable and spherical PS particles of nanosize were obtained by miniemulsion polymerization, which could be attributed to the prevention of Ostwald ripening by cosurfactant. Thermal properties of PS particle containing PCM were studied by differential scanning calorimetry. From DSC freeze-thaw cycle, PCM coated with PS exhibited the thermal energy storage and release behaviors, and the latent heat was found to be a maximum 145 J/g. It was noted that PS particles containing PCM showed a good potential as a thermal energy storage medium.