• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.298-301
• /
• 2000

We investigated the etch rate of SiO$_2$ in E-ICP, ICP system and the addition gas (O$_2$H$_2$) effect on SiO$_2$ etch characteristics. In all conditions, E-ICP shows higher etch rate than ICP. Small amount of O$_2$ addition increase F atom and O$\^$*/ concentration. at optimized condition (30％ O$_2$ in CF$_4$, 70Hz) E-ICP system shows highest etch rate (about 6000${\AA}$). H$_2$addition in CF$_4$ Plasma make abrupt decrease Si etch rate and moderate decrease SiO$_2$ etch rate.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.6
• /
• pp.304-307
• /
• 2013

Reverse engineering of semiconductor devices utilizes delayering processes, in order to identify how the interconnection lines are stacked over transistor gates. Cu metal has been used in recent fabrication technologies, and de-processes becomes more difficult with the shrinking device dimensions. In this article, reverse engineering technologies to reveal the Cu interconnection lines and Cu via-plugs embedded in dielectric layers are investigated. Stacked dielectric layers are removed by $CF_4$ plasma etching, then the exposed planar Cu metal lines and via-plugs are selectively delineated by wet chemical solution, instead of the commonly used plasma-based dry etch. As a result, we have been successful in extracting the layouts of multiple layers within a system IC, and this technique can be applicable to other logic IC, analog IC, and CMOS IC, etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.269-272
• /
• 1995

As methane concentration was varietal, the textures of diamond films deposited on Si(100)substrate could be observed by XRD, SEM and Raman spectroscope. As a result, O$_2$plasma etching has been useful to observe microscopic structure of diamond films by SEM. The cross section of diamond films deposited on Si(100) substrate with 4% concentration of methane to hydrogen was a polycrystal like a pillar. The diamond crystal like a pillar has been oriented to (110) surface and the high quality diamond with FWHM of Raman spectra being 3.8cm$\^$-1/ has been grown. As time goes by deposition time, the preferred orientation increases.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.3
• /
• pp.227-232
• /
• 2002

The silylated photoresist etch process was tested by enhanced-ICP. The comparison of the two process results of micro pattern etching with $0.35\mu\textrm{m}$ CD by E-ICP and ICP reveals that I-ICP has bettor quality than ICP. The etch rate and the RIE lag effect was improved in E-ICP. Especially, the problem of the lateral etch was improved in E-ICP.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.270-276
• /
• 1996

As methane concentration was varied, the textures of diamond films deposited on Si(100)substrate were observed by XRD,SEM and Raman spectroscope. As a result, $O_{2}$ plasma etching has been useful to observe microscopic structure of diamond films by SEM. The cross section of diamond films deposited on Si(100)substrate with 4% concentration of methane to hydrogen was a polycrystal like a pillar. The diamond crystal like a pillar has been oriented to (110)surface and the high quality diamond film with FWHM of Raman spectra being 3.8 $cm^{-1}$ / has been grown. As time goes by deposition time, the preferred orientation increases

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.935-938
• /
• 2001

Carbon nanotubes(CNTs) was successfully grown on Ni coated silicon wafer substrate by applying PECVD technique(Plasma Enhanced Chemical Vapor Deposition). As a catalyst, Ni thin film of thickness ranging from 15∼30nm was prepared by electron beam evaporator method. In order to find the optimum growth condition, the type of the gas mixture such as C$_2$H$_2$-NH$_3$was systematically investigated by adjusting the gas mixing ratio in temperature of 600$^{\circ}C$ under the pressure of 0.4 torr. The diameter of the grown CNTs was 40∼150nm. As NH$_3$etching time increased the diameters of the nanotubes decreased whereas the density of nanotubes increased. TEM images clearly demonstrated synthesized nanotubes was multiwalled. We investigated electrical properties for the application of FED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.601-604
• /
• 2006

We have developed ZnO TFT array using conventional photolithography and wet etching processes. Transparent 20 nm of ultra thin ZnO film deposited by means of plasma enhanced atomic layer deposition at $100^{\circ}C$ was used for the active channel. The ZnO TFT has a mobility of $0.59cm^2/V.s$, a threshold voltage of 7.2V, sub-threshold swing of 0.64V/dec., and an on/off ratio of $10^8$.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.94-97
• /
• 1989

It is shown that fundamental plasma characteristic, which are sheath voltage and ion concentration, can be derived from measuring RF impedence. Plasma characteristics from this simple method are verified by direct measuring, to be reasonable. Using these values a new relation between isotropy and the ratio of sheath voltage to ion concentration is derived. For etch in which $CF_4$ is used, anisotropic etch can be achieved in its order $10^{-12}Vcm^3$ and isotropic etch in $10^{-12}Vcm^3$. These results are useful in every asymetric diode type etch system.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.197-200
• /
• 2001

Novel Enhanced Inductively Coupled Plasma is applied to etch $SiO_2$. Effect of $O_2$ or Ar addition to $C_{4}F_{8}$ gas is monitored by Optical Emission Spectroscopy and Quadrupole Mass Spectrometer. It is fund that Ar or $O_2$ dilution to $C_{4}F_{8}$ increases F emission intensity and decreases $CF_2$ intensity. However, the ac frequency to the Helmholtz coil decreases the F intensity and thus increases $CF_2$/F ratio. By adjusting the ac frequency, the optimum etch rate and PR to $SiO_2$ selectivity can be obtained in E-lCP.

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.1
• /
• pp.49-54
• /
• 1998

The effect of deposition paratmeters on the solid-phase crystallization of amorphous silicon films deposited by plasma-enhanced chemical vapor deposition has been investigated by x-ray diffraction. The amorphous silicon films were prepared on Si(100) wafers using SiH4 gas with and without H2 dilution at the substrate temperatures between 12$^{\circ}C$ and 38$0^{\circ}C$. The R. F. powers and the deposition pressures were also varied. After crystallizing at $600^{\circ}C$ for 24h, the films exhibited (111), (220), and (311) x-ray diffraction peaks. The (111) peak intensity increased as the substrate temperature decreased, and the H dilution suppressed the crystallization. Increasing R.F. powers within the limits of etching level and increasing deposition pressures also have enhanced the peak intensity. The peak intensity was closely related to the deposition rate, which may be an indirect indicator of structural disorder in amorphous silicon films. Our results are consistent with the fact that an increase of the structural disorder I amorphous silicon films enhances the grain size in the crystallized films.