• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.199-202
• /
• 1995

In the conventional $H_2$ design of PI controllers, the quadratic cost function includes only the plant output term and hence, the optimal controller often results in a very large plant input. In this paper, $H_{\infty}$ design methodology is combined with the conventional $H_2$ design to make a trade-off between the regulation of the plant input and the plant output in a systematic way.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.207-214
• /
• 2009

This paper presents a modem approach for speed control of a PMSM using the Particle Swarm Optimization (PSO) algorithm to optimize the parameters of the PI-Controller. The overall system simulated under various operating conditions and an experimental setup is prepared. The use of PSO as an optimization algorithm makes the drive robust, with faster dynamic response, higher accuracy and insensitive to load variation. Comparison between different controllers is achieved, using a PI controller which is tuned by two methods, firstly manually and secondly using the PSO technique. The system is tested under variable operating conditions. Implementation of the experimental setup is done. The simulation results show good dynamic response with fast recovery time and good agreement with experimental controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.379-381
• /
• 1999

This paper presents a study of the performance of a brushless DC motor (BLDCM) speed control system. Recently, most motor controls are implemented in digital electronics. Digital controllers tend to be more accurate, less susceptible to noise and more flexible in terms of programming. The system used a digital PI controller in order to implement the constant speed of Brushless DC motor. Microprocessor used in this experiment is 80c196kc. The applied motor has been constructed using a 50W, 150V, 3000rpm, four-pole motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.173-174
• /
• 2007

In this paper, a new speed sensorless control based on an instantaneous reactive power and a fuzzy PI compensator are proposed for the interior permanent magnet synchronous motor (IPMSM) drives. The conventional fixed gain PI and PID controllers are very sensitive to step change of command speed, parameter variations and load disturbance. Also, to the estimated speeds are compensated by using an instantaneous reactive power in synchronously rotating reference frame. In a fuzzy compensator, the system control parameters are adjusted by a fuzzy rule based system, which is a logical model of the human behavior for process control. The effectiveness of algorithm is confirmed by the experiments.

• 제어로봇시스템학회논문지
• /
• 제11권2호
• /
• pp.93-102
• /
• 2005

The Nyquist robust stability margin is proposed as a measure of robust stability for systems with Affine TFM(Transfer Function Matrix) parametric uncertainty. The parametric uncertainty is modeled through a Affine TFM MIMO (Multi-Input Multi-Output) description with dead-time, and the unstructured uncertainty through a bounded perturbation of Affine polynomials. Gershgorin's theorem and concepts of diagonal dominance and GB(Gershgorin Bands) are extended to include model uncertainty. Multiloop PI/PID controllers can be tuned by using a modified version of the Ziegler-Nichols (ZN) relations. Consequently, this paper provides sufficient conditions for the robustness of Affine TFM MIMO uncertain systems with dead-time based on Rosenbrock's DNA. Simulation examples show the performance and efficiency of the proposed multiloop design method for Affine uncertain systems with dead-time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1729_1730
• /
• 2009

This paper presents comparative experimental results of PI sliding mode control and PI control for a heavy duty robot which can handle an object of 600kg, The gains of the PI control was determined by TAE(Trial and Error) method. This paper presents a novel approach for the decoupling of the states cross-coupling using sliding mode control. The sliding mode control methode is based on the error between reference speeds and the actual speed. The proposed method has the advantages of PI control performance and the sliding mode control robustness. Its first step is to design PI controller, then the sliding mode control input term is added to it. This makes actual implementation of the controller easier. The robot and motion controllers were designed and made by author. The good control performance of the heavy duty robot was obtained by using simple algorithm. This means that the robot was designed very well in control respect.

• 전자공학회논문지SC
• /
• 제42권6호
• /
• pp.15-22
• /
• 2005

본 논문에서는 PID 제어기와 PI-PD 제어기 사이의 관계를 분석하여 이 두 제어기의 affine 집합을 구성하는 PID 제어기의 변형된 형태인 PID-PD 제어기와 그 동조 방법을 새롭게 제안한다. 제안된 설계 방법은 PID와 PI-PD 제어기를 이용한 전체 폐루프 시스템인 시간 응답을 경계로 그 사이의 응답을 보이도록 설계할 수 있다. 그 동조 방법으로 특정한 가격함수를 선정하여 이를 최소화하는 최적 동조법을 적용하여 제어를 설계하였다. 제안된 제어기의 유용성을 사례 연구와 분석을 통해 검토했다.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.177-189
• /
• 2015

The output of the controller is said to exceed the input limits of the plant being controlled when a control system operates in a non-linear region. This process is called the windup phenomenon. The windup phenomenon is not preferable in the control system because it leads to performance degradation, such as overshoot and system instability. Many anti-windup strategies involve switching, where the integral component differently operates between the linear and the non-linear states. The range of state for the non-overshoot performance is better illustrated by the boundary integral error plane than the proportional-integral (PI) plane in windup inspection. This study proposes a PI controller with a separate closed-loop integral controller and reference value set with respect to the input command and external torque. The PI controller is compared with existing conventional proportional integral, conditional integration, tracking back calculation, and integral state prediction schemes by using ScicosLab simulations. The controller is also experimentally verified on a direct current motor under no-load and loading conditions. The proposed controller shows a promising potential with its ability to eliminate overshoot with short settling time using the decoupling mode in both conditions.

• 한국철도학회논문집
• /
• 제15권3호
• /
• pp.237-243
• /
• 2012

3차원 유한요소법을 이용하여 엔드코일 효과를 고려한 SRM의 자계해석을 수행하였다. 고정자 극 형상에 따른 자계특성의 비교를 통하여 제안된 형상에서 자계특성이 향상됨을 확인하였다. 해석한 자계특성을 적용하여 철도부하에 대한 PI 제어기와 슬라이딩모드 제어기의 속도제어를 수행하였다. 속도 제어 시뮬레이션은 Matlab-Simulink를 사용하여 구현되었으며 부하 가변 조건에서 슬라이딩모드 제어기가 PI 제어기에 비해 더 우수한 과도응답 및 정상상태응답을 나타냄을 확인하였다.

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.25-31
• /
• 2007

본 논문에서는 스위치드 릴럭턴스 전동기 (SRM)의 히스테리시스 및 PI 전류제어기법의 응답특성에 관해 고찰하였다. SRM의 전류제어를 위해 가장 널리 적용되는 히스테리시스 제어기법은 전류응답특성이 빠르다는 장점이 있으나, 스위칭 주파수의 가변으로 인한 소음이 단점으로 알려져 있다. SRM의 전류제어를 위해 적용되는 다른 전류 제어기법으로는 PI 전류제어기법이 있으나, 비선형적인 특성으로 인해 일반적인 전동기 제어시스템과 같이 몇몇 고정된 변수들로 제어기를 설계하기가 용이하지 않다. 본 논문에서는 제한된 범위 내에서 전동기가 구동된다는 가정하에 선형화를 통한 PI 전류제어기를 설계하였다. 1마력 SRM을 적용하여 전류제어 및 속도제어 실험을 수행하였으며, 실험을 통해 얻어진 데이터는 적용 용도에 적합한 전류제어기법 선정을 위한 참고자료가 될 것으로 사료된다.