• 한국재료학회지
• /
• 제23권10호
• /
• pp.586-591
• /
• 2013

The printing of nanomaterials onto certain substrates is one of the key technologies behind high-speed interconnection and high-performance electronic devices. For the printing of next-generation electronic devices, a printing process which can be applied to a flexible substrate is needed. A printing process on a flexible substrate requires a lowtemperature, non-vacuum process due to the physical properties of the substrate. In this study, we obtained well-ordered Ag nanowires using modified gravure printing techniques. Ag nanowires are synthesized by a silver nitrate ($AgNO_3$) reduction process in an ethylene glycol solution. Ag nanowires were well aligned by hydrodynamic force on a micro-engraved Si substrate. With the three-dimensional structure of polydimethylsiloxane (PDMS), which has an inverse morphology relative to the micro-engraved Si substrate, the sub-micron alignment of Ag nanowires is possible. This technique can solve the performance problems associated with conventional organic materials. Also, given that this technique enables large-area printing, it has great applicability not only as a next-generation printing technology but also in a range of other fields.

• 한국광학회지
• /
• 제18권2호
• /
• pp.149-154
• /
• 2007

저가의 소자 개발이 가능한 나노임프린팅 공정을 도입하여 510 nm 주기의 브래그 격자 구조를 가지는 폴리머 광도파로 소자를 제작하였다. 폴리머 격자 광소자의 온도 의존성을 감소시키기 위한 방법으로 플라스틱 박막으로 이루어진 유연성 기판상에 브래그 격자를 제작하는 것이 필요하다. 임프린팅 공정을 손쉽게 수행하기 위한 광도파로 구조를 채택하였으며, 코아와 클래딩의 굴절률이 각각 1.540, 1.430인 폴리머를 이용하여 코아 두께가 $3{\mu}m$인 단일모드 광도파로 구조를 얻을 수 있었다. 유연성 기판 브래그 격자 광도파로 소자의 특성을 Si기판 브래그 격자 광도파로 소자와 비교하여 관측한 결과, 유연성 기판 도입에 따른 브래그 반사 소자의 성능 저하는 나타나지 않았다.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.67-74
• /
• 2002

New immunoprotecting membranes were prepared by spin coating the amphiphilic random multiblock copolymers of poly(ethylene glycol) (PEG) and poly(tetramethylene ether glycol) (PTMEG) or poly(dimethyl siloxane) (PDMS) on porous Durapore(R) membrane. The copolymer coating was intended to make a biocompatible, immunoprotecting diffusional barrier and the supporting porous substrate was for mechanical stability and processability. By filling Durapore(R) membrane pores with water, the penetration of coating solution into the pores was minimized during the spin coating process. A single coating process produced a completely covered thin surface layer (~1 ${\mu}{\textrm}{m}$ in thickness) on the porous substrate membrane. The permselectivity of the coated layer was influenced by PEG block length, polymer composition, and thickness of the coating layer. A composite membrane with the coating layer prepared with PEG 2 K/PTMEG 2 K block copolymer showed that its molecular weight cut-of fat any 40 based on dextran was close to the molecular size of IgG (Mw = 150 kDa). However, IgG permeation was detected from protein permeation test, while glucose oxidase (Mw = 186 kDa) was not permeable through the coated membrane.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.229.2-229.2
• /
• 2014

Graphene, an allotrope of carbon, is a two-dimensional material having a unique electro-mechanical property that shows significant change of the electrical conductance under the applied strain. In addition of the extraordinary mechanical strength [1], graphene becomes a prospective candidate for pressure sensor technology [2]. However, very few investigations have been carried out to demonstrate characteristics of graphene sensor as a device form. In this study, we demonstrate a pressure sensor using graphene double layer as an active channel to generate electrical signal as the response of the applied vertical pressure. For formation of the active channel in the pressure sensor, two single graphene layers which are grown on Cu foil (25 um thickness) by the plasma enhanced chemical vapor deposition (PECVD) are sequentially transformed to the poly-di-methyl-siloxane (PDMS) substrate. Dry and wet transfer methods are individually employed for formation of the double layer graphene. This sensor geometry results a switching characteristic which shows ~900% conductivity change in response to the application of pulsed pressure of 5 kPa whose on and off duration is 3 sec. Additionally, the functional reliability of the sensor confirms consistent behavior with a 200-cycle test.

• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.117-123
• /
• 2015

신축성 디바이스용 강성도 국부변환 기판기술을 개발하기 위해 강성도가 서로 다른 두 polydimethylsiloxane 탄성고분자를 사용하여 섬(island) 구조로 이루어진 강성도 국부변환 신축성 기판을 형성하고 변형 거동을 분석하였다. 기판 기지로는 탄성계수가 0.09 MPa인 Dragon Skin 10을 사용하였으며, 섬 구조의 강성도 국부변환부는 탄성계수가 2.15 MPa인 Sylgard 184를 사용하였다. 신축성 기판의 형상은 길이 6.5 cm, 두께 0.4 cm, 폭 2.5 cm 이었다. Dragon Skin 10 기지에 폭 1 cm, 길이 1~6 cm인 Sylgard 184의 삽입에 의해 신축성 기판의 탄성계수가 0.09 MPa에서 0.13~0.33 MPa로 증가하였다. 길이 4 cm, 폭 0.5~1.5 cm인 Sylgard 184 강성도 국부변환부를 내재시킴에 따라 신축성 기판의 탄성계수가 0.16~0.2 MPa로 증가하였으며, 길이 2 cm, 폭 0.5~1.5 cm인 강성도 국부변환부를 내재시킴에 따라 탄성계수가 0.142~0.154 MPa로 증가하였다. 신축성 기판의 변형률이 증가함에 따라 Sylgard 184와 Dragon Skin 10의 강도 차이가 현저히 증가하는데 기인하여 강성도 국부변환부의 변형억제 효과가 향상되었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권4호
• /
• pp.232-238
• /
• 2001

A new DNA purification chip is proposed and fabricated for the sample preparation of Nucleic Acid (NA) probe assay. The proposed DNA purification chip is fabricated using photosensitive glass substrate and polydimethylsiloxane (PDMS) cover fixture. We have successfully captured and eluted the DNA using the fabricated photosensitive glass chip. The fabricated DNA purification chip showed a binding capacity of $15ng/\textrm{cm}^2$and a minimum extractable input concentration of $100copies/200\muL$. The proposed DNA purification chip can be applied for low-cost, disposable sample preparation of NA probe assays.

• 센서학회지
• /
• 제18권1호
• /
• pp.42-47
• /
• 2009

In this paper we propose a microfluidic chip that measures the mechanical stiffness of cell membrane using impedance measurement. The microfluidic chip is composed of PDMS channel and a glass substrate with electrode. The proposed device uses patch-clamp technique to capture and deform a target cell and measures impedance of deformed cells. We demonstrated that the impedance increased after the membrane stretched and blocked the channel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1499_1500
• /
• 2009

In this paper, we present a simple fabrication process for sloped electrodes in 2-degree of fredom(DOF) scanning micromirror employing pholydimethylsiloxane(PDMS). Using this process, quasi-conic figure electrode is successfully fabricated on the substrate. Simulation results show sloped electrodes decrease actuation voltage down to 22% compared with parallel plate type of electrodes having the same electrode area.

• Journal of Microbiology and Biotechnology
• /
• 제16권8호
• /
• pp.1216-1221
• /
• 2006

A protein array was fabricated for a miniaturized immunoassay using microcontact printing ($\mu$CP). A polydimethylsiloxane (PDMS) stamp with a 5 $\mu$m$\times$5 /$\mu$m dimension was molded from a silicon master developed by photolithography. Under optimal fabrication conditions, including the baking, incubation, and exposure time, a silicon master was successfully fabricated with a definite aspect ratio. An antibody fragment was utilized as the ink for the $\mu$CP, and transferred to an Au substrate because of the Au-thiol (-SH) interaction. The immobilization and antibody-antigen interaction were investigated with fluorescence microscopy. When human serum albumin (HSA) was applied to the protein array fabricated with an antibody against HSA, the detection limit was 100 pg/ml of HSA when using a secondary antibody labeled with a fluorescence tag. The fabricated protein array maintained its activity for 14 days.

• KSBB Journal
• /
• 제13권1호
• /
• pp.38-43
• /
• 1998

Application of pervaporative extraction of ethanol to simultaneous saccharification and fermentation(SSF) of cellulose was investigated. From batch experiments, optimum cellulose substrate and enzyme loadings were found to be 10% and 15 IFPU/g cellulose, respectively. The cellulose conversion was lowered in fed-batch system due to the ethanol accumulation. The activity of the yeast Saccharomyces uvarum used in this study was significantly reduced at ethanol concentrations above around 40 g/L. From pervaporation experiments using PDMS membrane, ethanol was efficiently separated at 38$^\circ C$ and 10 mmHg of a down stream pressure. The pervaporation unit with 240 cm$^2$ of surface area was combined into the SSF reactor. The continuous removal of ethanol by pervaporation during SSF resulted in an improved cellulose conversion. Within the scope of this experiment, ethanol yields in the pervaporative SSF and simple SSF were 68.3% and 56.6%, respectively. The permeate flux for SSF broth pervaporation was about one-half that for the pervaporation of aqueous ethanol solution. Accordingly, the development of a membrane with higher ethanol selectivity and flux will increase the feasibility of this technology.