• 한국정보통신학회논문지
• /
• 제18권6호
• /
• pp.1407-1412
• /
• 2014

근적외선 파장대역 850 nm ~ 1000 nm에서 레이저를 검출하기 위해 포토다이오드의 분광감응도를 향상시키고자 본 논문에서 실리콘 기반 고감도 PIN 포토 다이오드를 제작하고 전기적 및 광학적 특성을 분석하였다. 제작된 소자는 TO-18형으로 패키징 하였고 포토다이오드의 전기적 특성으로 역 바이어스 전압이 5V일 때 암전류는 Anode 1과 Anode 2는 약 0.055 nA 의 값을 나타내었으며 정전용약은 0V 일 때 1 kHz 주파수 대역에서 약 19.5 pF, 200 kHz 주파수 대역에서 약 19.8 pF의 적은 정전용약을 나타내었다. 또한 출력신호의 상승시간은 10 V의 전압일 때 약 30 ns의 고속 응답특성을 확인하였다. 광학적 특성 분석으로는 880 nm에서 최대 0.66 A/W의 분광감응도 값을 나타내었고 1000 nm에서는 0.45 A/W로 비교적 우수한 분광감응도를 나타내었다.

• Journal of Microbiology and Biotechnology
• /
• 제19권10호
• /
• pp.1161-1168
• /
• 2009

Ethanol production by the simultaneous saccharification and fermentation (SSF) of low-value rice wine cake (RWC) without cooking was investigated. RWC is the filtered solid waste of fermented rice wine mash and contains 53% raw starch. For the SSF, the RWC slurry was mixed with the raw-starch-digesting enzyme of Rhizopus sp. and yeast, where the yeast strain was selected from 300 strains and identified as Saccharomyces cerevisiae KV25. The highest efficiency (94%) of ethanol production was achieved when the uncooked RWC slurry contained 23.03% starch. The optimal SSF conditions were determined as 1.125 units of the raw-starch-digesting enzyme per gram of RWC, a fermentation temperature of $30^{\circ}C$, slurry pH of 4.5, 36-h-old seeding culture, initial yeast cell number of $2{\times}10^7$ per ml of slurry, 17 mM of urea as the nitrogen additive, 0.25 mM of $Cu^{2+}$ as the metal ion additive, and a fermentation time of 90 h. Under these optimal conditions, the ethanol production resulting from the SSF of the uncooked RWC slurry was improved to 16.8% (v/v) from 15.1% (v/v) of pre-optimization.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.14-19
• /
• 2015

This study performed simulation tests to prevent induced lightning that occurs to a 22.9 kV-Y distribution line. A simulated distribution line reduced to 1/50 of an actual distribution line was installed to measure the induced voltage according to the change in grounding resistance. It was found that the induced voltage increased as the grounding resistance increased but that the range of its increase was small. This study examined the reliability of the proposed lightning preventive distribution line using the Minitab program (Minitab 17). When a grounding resistance of $300{\Omega}$ was maintained for each electric pole, the Anderson Darling (AD) was 0.410, the smallest, and the P value was analyzed to be 0.323, verifying that the reliability and stability were excellent. Therefore, these results will be utilized as a basis for the substantiation of a lightning preventive distribution line before its installation.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1995년도 한국생물과학협회 학술발표대회
• /
• pp.120-120
• /
• 1995

The total size of the pF AR1, a genomic clone of Frankia FaCI, was estimated to be about 44Kb by summation of the individual fragment length generated by single or double restriction enzymes. Southern hybridization analyses with Azotobacter vinelandii nif-genes as probes and partial sequencing analyses of the subclones revealed that organization of the nif-gene in the FaCI strain was nifV, H, D, K, E, N, X, W, B. The organization of the structural genes for nitrogenase is the same in this Frankia strain as it is in most other nitrogen-fixing prokaryotes but the positioning of the nifV-like gene relative to the nifHDK cluster differs. A consensus nif-promoter-like sequence, found at 5' of nifH, was not detected upstream of the niJV-like gene. nifV-like gene contained a ORF of 1206 NT encoding 401 amino acids. The nucleotide sequence and deduced amino acid sequence of the gene exhibit homology value of 65% and 41% with that from A vinelandii, respectively. The putative Shine-Dargamo sequences were present preceding nitK, nifH, D, K, and nifE, and in nitK gene putative start codon GTG was detected instead of A TG. The nucleotide and amino acid sequence of niIK of FaCI showed 82% and 76% homolgy with those of Frankia HFPCc 13, respectively. Amino acid sequence of niIK showed 69% and 61% homology with those of A vinelandii, Klebsiella pnewnoniae, respectively, while that of nifE 73% and 71%, respecti vely.i vely.

• Journal of Astronomy and Space Sciences
• /
• 제34권4호
• /
• pp.251-256
• /
• 2017

The electric coupling between the lithosphere and the ionosphere is examined. The electric field is considered as a timevarying irregular vertical Coulomb field presumably produced on the Earth's surface before an earthquake within its epicentral zone by some micro-processes in the lithosphere. It is shown that the Fourier component of this electric field with a frequency of 500 Hz and a horizontal scale-size of 100 km produces in the nighttime ionosphere of high and middle latitudes a transverse electric field with a magnitude of ~20 mV/m if the peak value of the amplitude of this Fourier component is just 30 V/m. The time-varying vertical Coulomb field with a frequency of 500 Hz penetrates from the ground into the ionosphere by a factor of ${\sim}7{\times}10^5$ more efficient than a time independent vertical electrostatic field of the same scale size. The transverse electric field with amplitude of 20 mV/m will cause perturbations in the nighttime F region electron density through heating the F region plasma resulting in a reduction of the downward plasma flux from the protonosphere and an excitation of acoustic gravity waves.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.36-38
• /
• 2004

In many countries, including Korea, in order to transmit the more electric power, the higher transmission line voltage is inevitable. So, a rapid reclosing scheme is important for UHV transmission lines to ensure requirements for high reliability of main lines. But, because of the high voltage and long span of UHV lines, the secondary arc current flows across the fault point even after the interruption of the fault current. i.e. A critical aspect of reclosing operation is the extinction of the secondary arc since it must extinguish before successful reclosure can occur. In Korea transmission lines, it is scheduled to energize 765kV single transmission line(79km) between Sin-Ansung S/S and Sin-Gapyeong S/S at June 2006. Therefore this paper analyzes characteristics of the secondary arc extinction on 765kV single transmission line using EMTP. Simulation results shows that the average value of the secondary arc is $30A_{rms}$ and the auto-extinction time of it is longer at closer point to Sin-Gapyeong S/S.

• Journal of applied mathematics & informatics
• /
• 제42권2호
• /
• pp.367-377
• /
• 2024

Let G = (V, E) be a graph with p-vertices and q-edges and let R^◦ be a finite zero ring of order n. An injective function f : V (G) → {r₁, r₂, _…, r_k}, where r_i ∈ R^◦ is called vertex pair sum k-zero ring labeling, if it is possible to label the vertices x ∈ V with distinct labels from R^◦ such that each edge e = uv is labeled with f(e = uv) = [f(u) + f(v)] (mod n) and the edge labels are distinct. A graph admits such labeling is called vertex pair sum k-zero ring graph. The minimum value of positive integer k for a graph G which admits a vertex pair sum k-zero ring labeling is called the vertex pair sum k-zero ring index denoted by 𝜓_pz(G). In this paper, we defined the vertex pair sum k-zero ring labeling and applied to some graphs.

• Current Research on Agriculture and Life Sciences
• /
• 제31권3호
• /
• pp.193-199
• /
• 2013

본 연구에서는 황토를 이용한 인견직물의 천연염색에 대한 연구의 일환으로, 인견직물의 카티온화가 이루어졌으며, 여러가지 염색조건 즉 염색온도, 염색시간, 염색 pH와 욕비에 따른 염착특성을 평가하여 적정 염색조건을 설정하였으며 이에 따른 염색된 인견직물의 견뢰도 평가를 통해 다음과 같은 결과를 얻었다. 수비법으로 얻은 황토분말의 입자 크기는 $0.4{\sim}1.7{\mu}m$ 범위로 나타났으며 $1.1{\sim}1.4{\mu}m$범위내의 분포가 가장 많은 것으로 나타났다. 황토성분을 분석한 결과, 이산화규소와 산화알루미늄이 많은 양을 차지하는 것으로 나타났다. 인견 직물의 암모늄기의 도입에 의한 양이온화는 FT-IR 흡수스펙트럼에서 $1,540cm^{-1}$ 부근의 N-H bending에 의한 출현 peak로 확인할 수 있었다. 염색 pH에 따른 K/S 값은 pH 8에서 가장 높게 나타났으며, 염색시간에 따른 K/S 값은 시간이 경과함에 따라 염색시간 30분까지는 급격히 증가하다가 그 이상의 시간에서는 거의 증가하지 않았다. 황토농도에 따른 K/S 값은 20% 이하의 농도에서는 약간 증가하지만 30%에서 최고값을 보여준 후 점차 감소하는 경향으로 나타났다. 콩즙의 전처리농도에 따른 K/S 값은 처리농도 30% 까지는 증가하였으나 그 이상의 농도에서는 오히려 약간 감소하는 경향으로 나타났다. 황토염색직물의 황토염착 분포 및 염착 상태를 관찰한 결과 황토 염색 농도가 증가함에 따라 황토입자의 부착량이 많아짐을 알 수 있다. 양이온화 처리에 의해서도 황토의 부착량이 증가하는 것을 볼 수 있으며, 콩즙을 처리하면 콩즙이 직물의 표면을 감싸는 모습을 볼 수 있으며, 콩즙을 처리하지 않은 시료에 비해 콩즙을 전처리한 시료에 더 많은 양의 황토입자가 부착되어 있는 것을 확인할 수 있다.

• 지질공학
• /
• 제11권2호
• /
• pp.175-190
• /
• 2001

오염된 연약지반에 편재하중이 작용하는 경우에 있어서 지반의 소성화에 따른 측방유동에 대한 거동을 규명하기 위하여 기존의 이론적인 배경을 고찰하고, 모형실험을 통하여 실측한 결과를 상호 비교.분석하였다. 모형실험은 모형재하장치인 토조와 재하틀 및 재하판을 제작하여 토조 안에 함수비를 일정하게 유지한 상태에서 자연지반의 시료와 오염물질을 점진적으로 증가시킨 지반시료에 대하여 일정한 시간 간격으로 편재하중을 증가시키면서 침하량과 측방변위량 및 융기량 등을 관측하였다. 그 결과 한계하중은 실험값이 Tschebotarioff(q$_{cr}$=3.0$_{cu}$)의 제안값과 Meyerhof(q$_{cr}$=(B/2H+$\pi$/2)$_{cu}$)의 제안값에 근접하여 q$_{cr}$=2.78$_{cu}$값을 나타냈고, 극한하중은 Prandtl의 제안값에 근접하여 q$_{ult}$=4.84$_{cu}$값을 나타냈다. 측방유동압은 Matsui.Hong의 이론식에 의해서 산정함이 비교적 적절하며, 측방유동압의 최대값은 토층두께(H)의 0.3H 부근에서 발생하였으며, 복합형과 Poulos의 분포형태 및 오염되지 않는 연약점토(CL, CH)지반 보다 지표면측으로 상승하여 발생하였다. 안정관리방법은 지반의 측방유동에 의한 소성변위량을 많이 이용하고 있는 부영.교본, 자전.관구, 송미.천촌 등의 안정관리도에 적용한 결과 송미.천촌의{S$_{v}$-(Y$_{m}$/S$_{v}$)}관리도와 자전.관구의 {(q/Y$_{m}$)-q}관리도에서 얻어진 극한하중은 하중-침하량곡선 (q-S$_{v}$)에서 얻어진 극한하중 보다 적은 경향을 나타냈다.

• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.165-185
• /
• 2015

The suspended zipper bracing system is suggested to reduce the flaws of ordinary zipper braced and concentric inverted V braced frames. In the design procedure of suspended zipper bracing systems, columns and top story truss elements are strengthened. This bracing system show different performances and characteristics compared with inverted V braced and ordinary zipper frames. As a result, a different response modification factor for suspend zipper frames is needed. In this research paper, the response modification factor of suspended zipper frames was obtained using the incremental dynamic analysis. Suspended zipper braced frames with different stories and bay lengths were selected to be representations of the design space. To analyze the frames, a number of models were constructed and calibrated using experimental data. These archetype models were subjected to 44 earthquake records of the FEMA-P695 project data set. The incremental dynamic analysis and elastic dynamic analysis were carried out to determine the yield base shear value and elastic base shear value of archetype models using the OpenSEES software. The seismic response modification factor for each frame was calculated separately and the values of 9.5 and 13.6 were recommended for ultimate limit state and allowable stress design methods, respectively.