1 |
Schmidt, B.J. and Barlett, F.M. (2002), "Review of resistance factor for steel: Resistance distributions and resistance factor calibration", Can. J. Civil Eng., 29(1), 109-118.
DOI
|
2 |
Tremblay, R. and Trica, L. (2003), "Behavior and design of multi-story zipper concentrically braced steel frames for the mitigation of soft-story response", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, August.
|
3 |
Uang, C.M. (1991), "Establishing R (or Rw) and Cd factor for building seismic provision", J. Struct. Eng., 117(1), 19-28.
DOI
|
4 |
Uriz, P. (2005), "Toward earthquake-resistant design of concentrically braced steel-frame structures", Ph.D. Thesis, University of California at Berkeley, Berkeley, CA, USA.
|
5 |
Uriz, P. and Mahin, S.A. (2004), "Seismic vulnerability assessment of concentically braced frames", J. Steel Struct., 4, 239-248.
|
6 |
Yang, C.S. and Leon, R. (2003), "Special inverted V braced frames with suspended zipper struts", Doctoral Dissertation, Georgia Institute of Technology, GA, USA.
|
7 |
Yang, C., Leon, R. and DesRoches, R. (2010), "Cyclic behavior of zipper-braced frames", Earthq. Spectra, 26(2), 561-582.
DOI
|
8 |
Abdollahzadeh, G.R. and Banihashemi, M. (2013), "Response modification factor of dual moment-resistant frame with buckling restrained brace (BRB)", Steel Compos. Struct., Int. J., 14(6), 621-636.
과학기술학회마을
DOI
|
9 |
AISC (2005), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, IL, USA.
|
10 |
ASCE (2005), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers.
|
11 |
Asgarian, B. and Shokrgozar, H.R. (2008), "BRBF response modification factor", J. Construct. Steel Res., 65(2), 290-298.
DOI
|
12 |
ATC-19 (1995), Structural response modification factors, Applied Technology Council, Redwood City, CA, USA.
|
13 |
ATC-34 (1995), A critical review of current approaches to earthquake resistant design, Applied Technology Council, Redwood City, CA, USA.
|
14 |
Bruneau, M., Uang, C.M. and Wittaker, A. (1998), Ductile Design of Steel Structures, McGraw-Hill, New York, NY, USA.
|
15 |
Fell, B.V., Kanvinde, A., Deierlein, G., Myers, A. and Fu, X. (2006), "Buckling and Fracture of Concentic Braces Under Inelastic Cyclic Loading", Steel Technical Information and Product Services (SteelTIPS), Moraga, CA, USA.
|
16 |
FEMA-P695 (2009), Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency, Washington, D.C., USA.
|
17 |
FEMA 356 (2000), Seismic Rehabilitation Pre-Standard, Federal Emergency Management Agency, Washington, D.C., USA.
|
18 |
Kim, J., Cho, C., Lee, K. and Lee, C. (2008), "Design of zipper column in inverted V braced steel frames", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October.
|
19 |
Goel, S.C. (1992), "Earthquake resistant design of ductile braced steel structures", Stability and Ductility of Steel Structures under Cyclic Loading, CRC Press, Boca Raton, FL, USA.
|
20 |
Khatib, I.F., Mahin, S.A. and Piester, K.S. (1988), "Seismic behavior of concentrically braced steel frames", Earthquake Engineering Research Center, UCB/EERC-88/01.
|
21 |
Leon, T.R. and Yang, C.S. (2003), "Special inverted V braced frames with suspended zipper struts", National Center for Research on Earthquake Engineering, International Workshop on Steel and Concrete Composite Construction, IWSCCC, Taipei, Taiwan.
|
22 |
Mazzolani, F.M. and Piluso, V. (1996), Theory and Design of Seismic Resistant Steel Frames, E & FN Spon, London, UK.
|
23 |
Mozzoni, S., McKenna, F., Scott, M.H., Fenves, G.L. and Jeremic, B. (2004), OpenSEES command language manual.
|
24 |
Mwafi, A.M. and Elnashi, A.S. (2002), "Calibration of force reduction factors of RC buildings", Journal of Earthquake Engineering, 6(22): 239-73.
|
25 |
Han, S.W., Kim, W.T. and Foutch, D.A. (2007), "Tensile strength equation for HSS bracing members having slotted end connections", Earthq. Eng. Struct. Dyn., 36(8), 995-1008.
DOI
|
26 |
Kim, J., Cho, C., Lee, K. and Lee, C. (2008), "Design of zipper column in inverted V braced steel frames", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October.
|