• Transactions on Electrical and Electronic Materials
• /
• 제2권2호
• /
• pp.42-45
• /
• 2001

An ozone condensation system is evaluated from the viewpoint of an ozone supplier for Bi-superconductor thin film growth. An ozone condenser by a selective adsorption on the silica gel surface is constructed. Ozone density is evaluated by three methods; ultraviolet absorption, thermal decomposition and Q-mass analyzing methods. Thermal decomposition method is found to be available to the density evaluation from dilute to highly condensed ozone. The highest ozone density condensed by the adsorption method is evaluated to be 97 mol%.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.932-938
• /
• 2010

This paper proposed the effective treatment method for organic substances using the barrier discharge plasma process and catalytic chemical reaction followed from ozone decomposition. The decomposition by the plasma process of organic substances such as trichloroethylene, methyl alcohol, acetone, and dichloromethane carried out, and ozone is generated effectively at the same time. By passing through catalysts, ozone easily decomposed and further decomposed organic substances. And, 2-dimensional distribution of ozone using the optical measurement method is performed to identify the catalytic surface chemical reaction. In addition, CO is easily oxidized into $CO_2$ by this chemical reaction, which might be induced oxygen atom radicals formed at the surface of catalyst from ozone decomposition.

• 공업화학
• /
• 제24권2호
• /
• pp.161-164
• /
• 2013

본 연구에서는, 폐건전지로부터 회수된 특정 성분들을 이용하여 오존분해 촉매로서의 적용성을 평가하였다. 폐건전지에서 축출된 성분 중, Mn의 함량이 오존분해 반응에 주요 인자임을 보였다. 또한, Zn 함량에 따라 deactivation rate와 높은 상관성을 나타냈으며, K 함량은 오존분해 반응과 상관성이 없음을 나타냈다. 그리고 $TiO_2$를 첨가하여 제조한 촉매는 Mn 함량의 감소로 인한 효율 저하를 나타냈으며, Mn 구조상의 특징은 오존분해 반응과 상관성이 없음을 나타냈다.

• 한국환경보건학회지
• /
• 제23권4호
• /
• pp.127-132
• /
• 1997

The characteristics of the ozone treatments of phenol were studied in a laboratory scale wastewater treatment system. The ozone treatment of wastewater was carried out in a batch-type reactor. The initial pH of wastewater(7-10), volumetric flow rate(1-2l/min) and ozone concentration(20~30 mg/l) of aerating gas were considereal as experimental variables in the ozone treatment. Phenol was decomposed easily by the ozone in a batch treatment, where the rate determining step was the COD removal that is decomposition of intermediates formed by the ozonation of phenol. Phenol decomposition and COD removal could be expressed by the first order reaction for the phenol concentration and COD, respectively. Rate constants of phenol decomposition and COD removal increased with the initial pH, volumetric flow rate and ozone concentration of aeration gas. Under the present experimental condition, their relationships could be given by for the phenol decomposition $k'=4.46\times 10^{-9}[pH]_o ^{3.94}[O_3]^{1.42}Q_{O3}^{1.57}$ for the COD removal $k=2.46\times 10^{-10}[pH]_o ^{5.19}[O_3]^{1.15}Q_{O3}^{1.19}$

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.272-275
• /
• 2002

An ozone condensation system is evaluated in the viewpoint of an ozone supplier for oxide thin film growth. Ozone is condensed by the adsorption and distillation method. Then their concentrations are analyzed by three methods; ultraviolet absorption, thermal decomposition and Q-mass analyzing methods. Thermal decomposition method is found to be available to the concentration evaluation from dilution to highly condensed ozone. The highest ozone concentration condensed by the adsorption method is evaluated to be 96 mol%. The ozone is supplied for a sufficiently long time to grow oxide thin films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.579-582
• /
• 2003

Ozone is usually generated from oxygen gas using a silent discharge apparatus and its concentration is less then 10 mol%. Ozone is condensed by the adsorption method, which is widely used for the growth of oxidation thin films such as superconductor. Highly condensed ozone is analyzed by three methods; ultraviolet absorption, thermal decomposition and Q-mass analyzing methods. Thermal decomposition method is most effective in the highly condensed ozone region and its method is superior to Q-mass analyzer for determining ozone concentration because of the simplicity of the method.

• 한국지반환경공학회 논문집
• /
• 제23권3호
• /
• pp.23-29
• /
• 2022

본 연구에서는 오존의 용해효율 개선과 자가분해 촉진을 위해 나노기포와 초음파 캐비테이션을 동시에 적용한 오존 나노기포 공정을 조사하였다. 공정의 유기물 분해효율을 파악하기 위해 200mm × 200mm × 300mm 규모의 반응기를 제작하여 다양한 조건에서 페놀 분해 실험을 진행하였다. 나노기포의 사용은 60분 반응에서 페놀 분해 효율을 일반적인 폭기 방식에 비해 2.07배 증가시켰으며, 용존 오존의 최대 용해농도를 크게 증가시켜 오존의 용해효율 개선에 효과적이었다. 초음파 조사는 나노기포와 함께 사용될 때 페놀 분해 효율을 36% 증가시켰으며 오존의 자가 분해 촉진으로 용존 오존은 낮게 나타났다. 초음파 출력이 강할수록 페놀 분해 효율도 증가하였으며, 실험에서 사용한 28kHz, 132kHz, 580kHz 중 132kHz의 주파수에서 페놀의 분해 효율이 가장 높게 나타났다. 오존 나노공정은 기존 오존 공정과 같이 높은 pH에서 더 좋은 분해효율을 보였으나 중성에서도 60분 반응 후 페놀 100% 분해를 달성하여 pH에 의한 영향이 적은 것으로 나타났다. 이는 초음파에 의한 오존 자가분해 촉진에 의한 것으로 판단된다. 초음파 조사에 의한 기포 특성 변화를 확인하기 위해 Zetasizer를 이용하여 기포의 크기와 제타 전위 분석을 진행하였으며 초음파 조사가 기포의 평균 크기를 11% 감소시키고 기포 표면의 음전하를 강화하여 오존 나노기포의 물질전달과 수산화 라디칼 생성 효율에 긍정적인 효과를 끼치는 것을 확인하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권2호
• /
• pp.34-39
• /
• 2010

In this study, the remediation of diesel contaminated soil was attempted with ozone treatment and Fenton reaction. About 10% of initial diesel concentration was removed by the ozone saturated solution. The pseudo-first order decomposition constant of diesel contaminated soil in the presence of 5% of hydrogen peroxide with 1.82, 2.82, 4.82, 6.82, and 11.82% of iron contents was 0.0228, 0.0308, 0.0482, 0.0471, and 0.0592 $min^{-1}$ respectively. The decomposition constant of the diesel was 0.0064 $min^{-1}$ with the addition of ozone saturated solution only. On the addition of ozone saturated solution in the presence of 5% hydrogen peroxide and 5% iron, the decomposition constant of the diesel was 0.0850 $min^{-1}$. These results indicated that the decomposition rate was 190% faster than without the addition of ozone saturated solution. Thus, the application of both ozone and the fenton reaction is promising for the remediation of the diesel contaminated soil.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.331-332
• /
• 2005

Ozone is ambient gas which is useful for the fabrication of metal oxide thin films under conditions of molecular beam epitaxy. Ozone is condensed by the adsorption method and its concentration is analyzed using the thermal decomposition method. The concentration of ozone exceeds 90 mol% and ozone is supplied for a sufficiently long time to grow oxide thin films. The ozone concentration is also evaluated using a quadrupole mass analyzer and the accuracy of this method is compared with the results of the thermal decomposition method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.264-267
• /
• 2002

An ozone condensation system is evaluated from the viewpoint of an ozone supplier for oxide thin film growth. Ozone is condensed by the adsorption method and its concentration is analyzed by three methods; ultraviolet absorption, thermal decomposition and Q-mass analyzing methods. Thermal decomposition method is found to be available to the concentration evaluation from dilution to highly condensed ozone. The highest ozone concentration condensed by the adsorption method is evaluated to be 97 mol%