• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.188-198
• /
• 2018

Since infants' skin is very weak and has poor adaptability to environment, they are vulnerable to dermatitis caused by chemicals. Organic cotton for baby wear with the same functions in inner and outer wears can be considered the most suitable fiber. Therefore, this study analyzes products and colors of Korean and U.S. baby wear brands which use organic cotton. Of the total of seven organic brands of baby wear examined in this study, three were Korean baby wear brands and four were U.S. brands. and design colors of total 331 items were examined on the web. The results of comparative analysis showed that there were more U.S. brands than Korean brands in designs by uses. Color analysis showed that Korean natural cotton color was preferred and Y, G colors are commonly used, but colors of U.S. brands featured increased variety compared with Korean brands. Therefore, the Korean infant and toddler brand using organic cotton requires more diverse designs and delicate and broad colors.

• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.15-20
• /
• 2018

There have been a number of major fatal fire accidents in Korea recently. The number of fires in 2017 were 44,178, which is not only increasing number of fires but also increasing in casualties. Particularly, the fire at Jecheon Sports Center, which suffered many casualties, is expected to have a huge impact. The cause of the fire has not been determined yet, but heat waves on the ceiling have also been pointed out. As such, the copper heating waves, which are used as a preventive measure against damage of pipes due to freezing of pipes, etc., always have a fire hazard. To determine the possibility of a flame-resistant heated fire, a positive electric cable product was used to artificially ignite and analyze the results. In case of a short circuit, the external covering of the positive electric cable is damaged, but not short circuit unless the heating material surrounding the wire is damaged. Due to the characteristics of heating cable for preventing copper waves, the chances of insulation becoming more severe due to moisture and temperature changes are higher than normal wires. If the internal heating system is carbonized by insulating deterioration without damage to the outer coating, it is likely to cause trekking, to form a winding loop in the heating materials, and to cause short circuit in the heated materials. For the positive temperature line, if the middle is shorted, the current continues to flow to the short circuit unless the breaker disconnects. Consequently, a heated fire that does not cut off the power immediately may leave multiple marks or cuts.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.4
• /
• pp.245-258
• /
• 2008

We describe here how we can use microfluidic technologies for fabricating functional materials that could be potentially utilized in cosmetics; these include void structures, functional particulate materials, shell materials, and multi-layered colloids. We can obtain these functional materials as microfluidic approaches provide precise control over both outer dimensions and inner morphology of emulsion drops in picoliter-volume scales with high throughput. We have confirmed that this technique has a great potential to fabricate novel particles and capsules with a variety of chemical compositions as well as higher orders of layers. This microfluidic approach will allow us to develop a lot of new techniques that are useful for a variety of applications, including delivery systems, chemical separations, bio-sensing, actuators, and so on. We do believe that these new techniques will help cosmetic industry not only give rise advanced functional materials and systems but also widen its product categories.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.1
• /
• pp.41-46
• /
• 2012

A deep-sea manganese nodule miner consists of 4 parts: the pickup device, crusher, disposal device, and tracked vehicle. The tracked vehicle is an essential component to keep the self-propelled miner moving across deep-sea soil. The performances of the tracked vehicle are influenced by noise factors: the shear strength of the seafloor, bottom current, seafloor slope, track speed, reaction forces of flexible hose, etc. It is necessary to adopt a robust design method that improves the performances and minimizes the variation caused by noise factors. Taguchi's method, the most widely known robust design method, searches for the robust optimum using an orthogonal array composed of the product of the inner array and outer array. In this paper, we propose a new screening technique to reduce the number of input factors and apply the MRSN (Multi-Response Signal to Noise) ratio to convert multiple performances into single one in order to overcome the difficulties and limitations of using Taguchi's method in a case with many input factors and multiple performances. A test miner was already designed and tested. It has about 1/10 the capacity of a commercial one and was successfully operated at an in-shore area. Taguchi's robust design was applied to the tracked vehicle of the test miner, and design improvements were implemented for the vehicle.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.251-257
• /
• 2018

We will be establish the new k stores of identical product firm $F_B$ to gain competitive advantage over rival firm $F_A$ that has already monopolize a market with k stores. In this situation, how we can decide the location of k stores? For this problem, Serra and Revelle proposes k-Median and MAXCAP integer programming using LP+BB to decide the k stores of firm $F_B$. Then they exchange the k stores to another location that cover more customers. This paper suggests non-neighborhood search method that finds the ${\upsilon}{\not\in}N_G(u)$nodes for u of firm $F_A$ without most outer loop nodes using just MS-Excel. As a result of experiment, the proposed algorithm can be get the optimal solution easier and faster than integer programming.

• Journal of the Korean Society of Costume
• /
• v.50 no.4
• /
• pp.165-180
• /
• 2000

Since fashion is considered to be a cultural product and belongs to the formative art as well, the changes in fashion reflect those of society. Modern fashion has emerged from the period when people would follow the popular fashion uniformly, and moved toward the age of diversity, expressing not only the inner desires and aesthetic sensibility of individuals but also the freedom from formality and traditional restrictions. This kind of changes in expression became important motives for modern dress design following the present cultural phenomena, and, so called "outerwearization" of the undergarment or "infra apparel" exemplifies this situation. Corset especially has been playing a vital role in exaggerating and emphasizing the beauty of female body and correction of its shape. Today, one can frequently witness corset in street fashion along with brassier, Its sister concept. This "outerwearization" of the undergarment is supplanted as a syndrome, and it is defined as "supra syndrome" using "supra" as the opposite meaning to "infra". This unique phenomenon of modern fashion cannot be explained by a single social aspect, but as a mixed state of eroticism, fetishism, feminism, demonstrationists and expressionism among several current phenomena. The advent of "supra syndrome" and its cultural background were illustrated and stand-out "supra syndrome" exhibited by many world-renowned designers were analyzed in this study. As the result of study, six design pieces were developed and produced in three groups, based on different corset motifs. This study reaffirms that creativity of design is limitless and the imaginative abilities alone cannot accomplish higher level of design and development of works of fashion unless they are accompanied by the understanding of historical background, periodical circumstances and cultural phenomena. In this study, utilizing the modern apparatus such as computer and the advent of the modern technology was also found helpful in creative fashion design process.

• Advances in concrete construction
• /
• v.2 no.4
• /
• pp.249-259
• /
• 2014

Mortar is a masonry product which is matrix of concrete. It consists of binder and fine aggregate and moreover, it is an essential associate in any reinforced structural construction. The strength of mortar is a special concern to the engineer because mortar is responsible to give protection in the outer part of the structure as well as at a brick joint in masonry wall system. The purpose of this research is to investigate the compressive strength and tensile strength of mortar, which are important mechanical properties, by replacing the cement and sand by stone dust. Moreover, to minimize the increasing demand of cement and sand, checking of appropriateness of stone dust as a construction material is necessary to ensure both solid waste minimization and recovery by exchanging stone dust with cement and sand. Stone dust passing by No. 200 sieve, is used as cement replacing material and retained by No. 100 sieve is used for sand replacement. Sand was replaced by stone dust of 15%, 20%, 25%, 30%, 35%, 40%, 45% and 50% by weight of sand while cement was replaced by stone dust of 3%, 5%, and 7% by weight of cement. Test result indicates that, compressive strength of specimen mix with 35% of sand replacing stone dust and 3% of cement replacing stone dust increases 21.33% and 22.76% respectively than the normal mortar specimen at 7 and 28 days while for tensile it increases up to 13.47%. At the end, optimum dose was selected and crack analysis as well as discussion also included.

• Geomechanics and Engineering
• /
• v.12 no.3
• /
• pp.523-539
• /
• 2017

Clay soils are typical for their swelling properties upon absorption of water during rains and development of cracks during summer time owing to the profile desorption of water through the inter-connected soil pores by water vapour diffusion leading to evaporation. This type of unstable soil phenomenon by and large poses a serious threat to the strength and stability of structures when rest on such type of soils. Even as lime and cement are extensively used for stabilization of clay soils it has become imperative to find relatively cheaper alternative materials to bring out the desired properties within the clay soil domain. In the present era of catastrophic environmental degradation as a side effect to modernized manufacturing processes, industrialization and urbanization the creative idea would be treating the waste products in a beneficial way for reuse and recycling. Bottom ash and ecosand are construed as a waste product from cement industry. An optimal combination of bottom ash-eco sand can be thought of as a viable alternative to stabilize the clay soils by means of an effective dispersion dynamics associated with the inter connected network of pore spaces. A CATIA model was created and imported to ANSYS Fluent to study the dispersion dynamics. Ion migration from the bottom ash-ecosand pile was facilitated through natural formation of cracks in clay soil subjected to atmospheric conditions. Treated samples collected at different curing days from inner and outer zones at different depths were tested for, plasticity index, Unconfined Compressive Strength (UCS), free swell index, water content, Cation Exchange Capacity (CEC), pH and ion concentration to show the effectiveness of the method in improving the clay soil.

• Journal of the Korean Society of Costume
• /
• v.62 no.4
• /
• pp.91-106
• /
• 2012

The purpose of this study was to offer some directions for the design of men's knitwear and provide basic data helpful for design conception and product development for creative and unique men's knitwear. As for the methodology, the investigator examined the works of these following ten designers that consistently participated in the men's Milano Collection for the last ten years from 2001 S/S to 2010 F/W: Burberry Prorsum, Costume National, D & G, D squared, Dolce & Gabbana, Giorgio Armani, Gucci, Iceberg, Prada, and Vivien Westwood. We identified the design elements expressed in knitwear, categorized examples for each element, and reviewed their characteristics. The results of this study are as follows. The designers usually adopted the H-silhouette with some room until 2006, after which the slim tubular silhouette became prevalent. Most of the designers made knitwear with normal yarn and expressed them by dyeing or printing regardless of seasons, which meant the usage level of fancy yarn was low. The much usage of the basic pattern was particularly salient. The most popular basic structure was plain, which was followed by rib and color pattern, which included the jacquard and intarsia pattern. The designers presented thick outer items made of thick yarn for F/W seasons and many thin inner items made of thin yarn for S/S seasons. The popular colors were brown from the Red Group(R) and beige from the Orange Group (YR) regardless of seasons. When achromatic colors were used a lot, there was a development of various grey shades. For the most used basic structure, plain, the designers employed such technical methods as printing, pleat treatment, and dyeing in high frequency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.65-70
• /
• 2014

This paper introduces a preform design method for a ring rolling process with an outer step. Underfilling is one of the general defects of the profile ring rolling process. It occurs when the deformation amount is small or step depth of the profiled region is large. To prevent underfilling, increasing the deformation amount or using a preform of size similar to that of the final product are required. Furthermore, the filling limit equation is suggested based on the shape factor and deformation ratio for preventing defects in the products. The filling limit equation has been derived through finite element analyses and production tests for four different cases. For verifying the suggested method, realsized profile rolling tests were performed, and test results were compared with the predictions of the equation.