• 전기전자학회논문지
• /
• 제13권2호
• /
• pp.126-131
• /
• 2009

Wrap-around 전계효과 트랜지스터는 채널과 전극간의 커플링을 매우 커서 채널길이가 짧아지면서 생기는 단채널효과(short channel effect)를 개선시킬 수 있는 이유로 많은 관심을 불러왔다. 본 논문에서는 실리콘 나노와이어를 이용하여 상향식의 wrap-around 전계효과 트랜지스터(FET)의 제작 공정을 소개한다. 소자의 제작 공정은 크게 전자빔 리소그래피, 유전영동(dielectrophoresis)을 이용한 나노와이어의 효과적 정렬 그리고 게이트 전극의 전기 화학적 도금(electrochemical deposition)을 이용한 생성 등의 방법들로 이루어진다. 전기 화학적 도금을 위한 용액은 독성을 띄지 않는 유기물 용액을 사용하였다. 액체 질소를 이용하여 polymethyl methacrylate(PMMA)가 전기화학적 도금시 형태를 잃지 않게 함으로써, 패터닝된 PMMA가 wrap-around 게이트 나노구조를 제작하기 위한 나노 템플릿으로 사용될 수 있도록 하였다.

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.231-237
• /
• 2004

Ga-MFI was synthesized by a hydrothermal process at atmospheric pressure. The effect of mole ratios of reactants on crystallization was also investigated thoroughly. The characteristics of synthesized Ga-MFI was compared with ZSM-5. The synthesis of Ga-MFI was carried out with five different mole-compositions of $\underline{a}SiO_2-\underline{b}Ga_2O_3-\underline{c}Na_2O-\underline{d}TPA_2o-\underline{e}H_2O$. The synthesized Ga-MFI and ZSM-5 were characterized by XRD and FT-IR. The inorganic cation ($Na^+$) and water played an important role in crystallinity and the organic cation ($TPA^+$) as a template played a great influence on yields. With the increase in the amount of $Ga^{3+}$, crystallization time was increased. With a fixed $SiO_2/Ga_2O_3$ ratio of 400, the optimum reaction condition was obtained at $H_2O/SiO_2$=30${\sim}$35, $Na_2O/SiO_2$=0.5${\sim}$0.6, and $TPA_2O/Na_2O$=1${\sim}$1.25. In these cases, the crystallinity and yield were more than 95% and 90%, respectively. By comparing IR spectrum of Ga-MFI with those of ZSM-5 and silicalite, it was found that Ga-MFI showed a unique peak at 970 $cm^{-1}$, which may be used to identify Ga-MFI from ZSM-5 and silicalite.

• 한국입자에어로졸학회지
• /
• 제8권2호
• /
• pp.89-95
• /
• 2012

Spherical mesoporous silica particles, of which main pore diameter was 3.8 nm, were successfully prepared by spray pyrolysis from aqueous silicic acid. The effect of precursor concentration, reaction temperature, and the addition of urea and PEG on the particle diameter and pore properties such as pore diameter, total pore volume, and specific surface area were investigated by using FE-SEM, particle size analyzer, and nitrogen absorption-desorption analysis. With an increase of the precursor concentration from 0.2 M to 0.7 M, the average particle diameter, total pore volume, and specific surface area of the porous silica particles increased from 0.56 to $0.96\;{\mu}m$, 0.434 to $0.486\;cm^3/g$, 467.8 to $610.4\;m^2/g$, respectively. Within the temperature range $(600\;^{\circ}C{\sim}800\;^{\circ}C)$, there was no significant difference in the pore diameter, total pore volume, and specific surface area. In addition, the addition of urea as an expansion aid led to slight increases in particle diameter, pore diameter, and specific surface area. However, when the polyethylene glycol (PEG) as an organic template was used, the total pore volume of porous particles increased dramatically.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.199-199
• /
• 2011

The addition of a carbanion to ${\yen}{\acute{a}}{\yen}{\hat{a}}$-unsaturated carbonyl compounds is of importance in the C-C bond formation reactions for modern pharmaceuticals and organic synthesis. Recently, heterogeneous asymmetric catalysis became more attractive area of research because of the easy recovery and separation of the catalyst from the reaction system. Most of synthetic methods for heterogeneous catalysts were grafting or immobilization of homogeneous catalyst onto the solid supports. Trans-1,2-Diaminocyclohexane(DACH) and L-proline ligands have been enormously used as chiral ligands in several catalytic transformation under homogenous conditions. Our group prepared l-proline functionalized mesoporous silica was synthesized under acidic condition using a poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer template (EO20PO70EO20, Pluronic P-123, BASF). Furthermore, we successfully directly synthesized trans-1,2 diaminocyclohexane functionalized mesoporous silica by using microwave method. The direct functionalization of chiral ligand into the framework of mesoporous materials is expected to be useful for the heterogeneous asymmetric catalysis. So, we adopt the direct synthesis of chiral ligand functionalized mesoporous silica by using thermal and microwave irradiation. Then, chiral ligand functionalized mesoporous silicas were applied to enantioselective asymmetric catalytic reactions.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.611-618
• /
• 2007

아민기로 코팅된 단분산 폴리스티렌 입자를 제조한 뒤 톨루엔-물로 구성된 유중수 액적(oil-in-water emulsion) 내부에서 입자를 자기 조립(self-assembly)시켜 다양한 다면체(polyhedra) 구조의 콜로이드 클러스터(colloidal cluster)를 제조하였다. 콜로이드 클러스터의 표면에서 솔-젤(sol-gel) 반응을 유발한 뒤 표면이 실리카로 코팅된 복합(composite) 콜로이드 클러스터를 제조할 수 있었고 이를 주형(template)으로 활용하여 고온 소성에 의해 내부의 폴리스티렌 입자를 제거하고 마이크로미터 크기의 다양한 구조의 비구형상 공동 입자(hollow particle)를 제조하였다. 밀도구배원심분리법 (density gradient centrifugation)에 의해 폴리스티렌 구성 입자의 수와 구조가 균일한 콜로이드 클러스터를 제조할 수 있었으며 표면 솔-젤 반응에 의해 비구형상 구조의 공동 입자를 제조하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권2호
• /
• pp.1-6
• /
• 2014

The five-year national project in Japan for R&D of coated conductors and applications, named as the Materials and Power Applications of Coated Conductors (M-PACC) project, was finished at the end of FY2013. The project consists of four sub-themes as cable, transformer, SMES and coated conductors. In the theme of coated conductors, the fabrication process had been developed to satisfy the requirements from the applications such as in-field $I_c$ performance, low AC loss in the long tapes etc. Through the project, the remarkable progress was achieved as follows; a high in-field minimum $I_c$ value over 54A/cm-width under 3T at 77K was realized in a 200m long EuBCO tape with artificial pinning centers of $BaHfO_3$ by the pulsed laser deposition (PLD) technique on the IBAD template. On the other hand, the AC loss reduction was confirmed in the tapes fabricated by both PLD and the metal organic deposition (MOD) techniques by scribing 100m tapes into 10-filamments. Additionally, the mechanism of the delamination phenomenon was systematically investigated and the strength was improved by eliminating the origins of the weak points in the films. Through the development, all targeted goals were accomplished and the several results were appreciated as a world champion data.

• 멤브레인
• /
• 제29권3호
• /
• pp.183-189
• /
• 2019

양친성 PCZ-r-PEG 랜덤 공중합체를 기반으로 한 수열합성법을 통해 자가조립된 메조기공 이산화티타늄 마이크로 스피어를 합성하였다. 중합된 PCZ-r-PEG는 푸리에 변환 적외분광법(fourier transform infrared spectroscopy, FT-IR), 핵자기공명(nuclear magnetic resonance, NMR), 젤 투과 크로마토그래피(gel permeation chromatography, GPC) 그리고 투과전자 현미경(transmission electron microscopy, TEM)을 통해 그 특성이 분석되었다. 다공성 이산화티타늄 입자는 PCZ-r-PEG, 글루코스(glucose), 물을 테트라히드로푸란(tetrahydrofuran, THF) 용액에 분산시킨 뒤 $150^{\circ}C$, 12시간 동안 반응시켰다. 다공성 이산화티타늄 입자의 구조와 결정성 분석을 위해 주사전자현미경(scanning electron microscopy, SEM)과 엑스선 회절(X-ray diffraction, XRD)이 사용되었다.

• Journal of Electrochemical Science and Technology
• /
• 제12권4호
• /
• pp.458-464
• /
• 2021

Lithium ion batteries (LIBs) is a kind of rechargeable secondary battery, developed from lithium battery, lithium ions move between the positive and negative electrodes to realize the charging and discharging of external circuits. Zeolitic imidazolate frameworks (ZIFs) are porous crystalline materials in which organic imidazole esters are cross-linked to transition metals to form a framework structure. In this article, ZIF-67 is used as a sacrificial template to prepare nano porous carbon (NPC) coated cobalt nanoparticles. The final product Co/NPC composites with complete structure, regular morphology and uniform size were obtained by this method. The conductive network of cobalt and nitrogen doped carbon can shorten the lithium ion transport path and present high conductivity. In addition, amorphous carbon has more pores that can be fully in contact with the electrolyte during charging and discharging. At the same time, it also reduces the volume expansion during the cycle and slows down the rate of capacity attenuation caused by structure collapse. Co/NPC composites first discharge specific capacity up to 3115 mA h/g, under the current density of 200 mA/g, circular 200 reversible capacity as high as 751.1 mA h/g, and the excellent rate and resistance performance. The experimental results show that the Co/NPC composite material improves the electrical conductivity and electrochemical properties of the electrode. The cobalt based ZIF-67 as the precursor has opened the way for the design of highly performance electrodes for energy storage and electrochemical catalysis.

• 멤브레인
• /
• 제32권3호
• /
• pp.198-208
• /
• 2022

멤브레인은 분리 기술 및 다양한 사용처에 따라서 유기물, 액체, 용질, 증기, 기체, 이온 또는 전자 등 다양한 물질을 선택적으로 분리할 수 있다. 멤브레인은 크게 대칭막과 비대칭막으로 나누며, 기공의 유무에 따라 다공성과 비다공성으로 분류된다. 또한 멤브레인의 계면은 분자적으로 균일하거나, 또는 화학적으로 또는 물리적으로 불균일할 수 있다. 제조기술로는 용융 압출 제조법, 연신법, 템플레이트 침출법, 트랙-에치법, 용액 캐스팅법, 상전이법 및 용액 코팅법 등이 있다. 제조된 멤브레인은 정밀여과, 한외여과, 나노여과, 역삼투, 기체분리 및 에너지 분야와 같은 다양한 응용 분야에 적용될 수 있다. 본 총설에서는 멤브레인의 분류 및 종류에 따른 제조 방법에 대한 튜토리얼을 제공한다.

• 분석과학
• /
• 제19권4호
• /
• pp.309-315
• /
• 2006

Two piperazine-templated metal sulfate complexes, $(C_4N_2H_{12})[Ni(H_2O)_6](SO_4)_2$, I and ($C_4N_2H_{12}$) $[Co(H_2O)_6](SO_4)_2$, II, have been synthesized by hydro/solvothermal reactions and their crystal structures analyzed by single crystal X-ray diffraction methods. Complex I crystallizes in the monoclinic system, $P2_1/n$ space group, a=12.920(3), b=10.616(2), $c=13.303(2){\AA}$, ${\beta}=114.09(1)^{\circ}$, Z=4, $R_1=0.030$ for 3683 reflections; II: monoclinic $P2_1/n$, a=12.906(3), b=10.711(2), $c=13.303(2){\AA}$, ${\beta}=114.10(2)^{\circ}$, Z=4, $R_1=0.032$ for 4010 reflections. The crystal structures of the piperazine-templated metal(II) sulfates demonstrate zero-dimensional compound constituted by diprotonated piperazine cations, metal(II) cations and sulfate anions. The structures of complex I and II are substantially isostructural to that of the previously reported our piperazine-templated copper(II) sulfate complex $(C_4N_2H_{12})[Cu(H_2O)_6](SO_4)_2$. The central metal(II) atoms are coordinated by six water molecules in the octahedral geometry. The crystal structures are stabilized by three-dimensional networks of the $O_{water}-H{\cdots}O_{sulfate}$ and $N_{pip}-H{\cdots}O_{sulfate}$ hydrogen bonds between the water molecules and sulfate anions and protonated piperazine cations. Based on the results of thermal analysis, the thermal decomposition reactions of the complex I was analyzed to have three distinctive stages whereas the complex II proceed through several stages.