Browse > Article
http://dx.doi.org/10.9714/psac.2014.16.2.001

Progress in R＆D of coated conductor in M-PACC project  

Izumi, T. (Superconductivity Research Laboratory, International Superconductivity Technology)
Ibi, A. (Superconductivity Research Laboratory, International Superconductivity Technology)
Nakaoka, K. (Superconductivity Research Laboratory, International Superconductivity Technology)
Taneda, T. (Superconductivity Research Laboratory, International Superconductivity Technology)
Yoshida, T. (Superconductivity Research Laboratory, International Superconductivity Technology)
Takagi, Y. (Superconductivity Research Laboratory, International Superconductivity Technology)
Nakamura, T. (Superconductivity Research Laboratory, International Superconductivity Technology)
Machi, T. (Superconductivity Research Laboratory, International Superconductivity Technology)
Katayama, K. (Superconductivity Research Laboratory, International Superconductivity Technology)
Sakai, N. (Superconductivity Research Laboratory, International Superconductivity Technology)
Yoshizumi, M. (Superconductivity Research Laboratory, International Superconductivity Technology)
Koizumi, T. (SWCC Showa Cable Systems Co., Ltd.)
Kimura, K. (SWCC Showa Cable Systems Co., Ltd.)
Kato, T. (Japan Fine Ceramics Center)
Kiss, T. (Kyushu University)
Shiohara, Y. (Superconductivity Research Laboratory, International Superconductivity Technology)
Publication Information
Progress in Superconductivity and Cryogenics / v.16, no.2, 2014 , pp. 1-6 More about this Journal
Abstract
The five-year national project in Japan for R&D of coated conductors and applications, named as the Materials and Power Applications of Coated Conductors (M-PACC) project, was finished at the end of FY2013. The project consists of four sub-themes as cable, transformer, SMES and coated conductors. In the theme of coated conductors, the fabrication process had been developed to satisfy the requirements from the applications such as in-field $I_c$ performance, low AC loss in the long tapes etc. Through the project, the remarkable progress was achieved as follows; a high in-field minimum $I_c$ value over 54A/cm-width under 3T at 77K was realized in a 200m long EuBCO tape with artificial pinning centers of $BaHfO_3$ by the pulsed laser deposition (PLD) technique on the IBAD template. On the other hand, the AC loss reduction was confirmed in the tapes fabricated by both PLD and the metal organic deposition (MOD) techniques by scribing 100m tapes into 10-filamments. Additionally, the mechanism of the delamination phenomenon was systematically investigated and the strength was improved by eliminating the origins of the weak points in the films. Through the development, all targeted goals were accomplished and the several results were appreciated as a world champion data.
Keywords
YBCO; REBCO; coated conductor; $I_c$; in-field $I_c$; AC loss; mechanical strength; $J_e$; cost; delamination; APC;
Citations & Related Records
연도 인용수 순위
  • Reference
1 S. Honjo, T. Mimura, Y. Kitoh, Y. Noguchi, T. Masuda, H. Yumura, M. Watanabe, M. Ikeuchi, H. Yaguchi, T. Hara, "Status of Superconducting Cable Demonstration Project in Japan," IEEE Trans. Appl. Supercond .,vol. 21, pp. 967-971, 2011.   DOI   ScienceOn
2 K. Hayashi, T. Hitaka, T. Kaneko, M. Ueyama, A. Mikumo, N. Ayai, S. Kobayashi H. Takei and K. Sato, "Development of Ag-sheathed Bi-2223 superconducting wires and their applications," IEEE Trans. on Appl. Supercond., vol. 11, pp. 3281-3284, 2001.   DOI   ScienceOn
3 G. Osabe, N. Ayai, M. Kikuchi, K. Tatamidani, T. Nakashima, J. Fujikami, T. Kagiyama, K. Yamazaki, S. Yamade, E. Shizuya, S. Kobayashi, K. Hayashi, K. Sato, J. Shimoyama, H. Kitaguchi, H. Kumakura, "Recent progress of high performance Ag-sheathed Bi2223 wire," Physica C, vol. 470, pp. 1365-1368, 2010.   DOI   ScienceOn
4 B. Gamble, G. Snitcher and T. MacDonald, "Full Power Test of a 36.5 MW HTS Propulsion Motor," IEEE Trans. Appl. Supercond., vol. 21, pp. 1083-1088, 2011.   DOI   ScienceOn
5 Y. Liu, Y. Yao, Y. Chen, N. D. Khatri, J. Liu, E. Galtsyan, C. Lei, and V. Selvamanickam, "Electromagnetic Properties of (Gd,Y)$Ba_2Cu_3O_x$ Superconducting Tapes With High Levels of Zr Addition," IEEE Trans. Appl. Supercond., vol. 23, pp. 6601804, 2013.   DOI   ScienceOn
6 T. Muroga, T. Araki, T. Niwa, Y. Iijima, T. Saitoh, I. Hirabayashi, Y. Yamada, and Y. Shiohara, "$CeO_2$ buffer layers deposited by pulsed laser deposition for TFA-MOD $YBa_2Cu_3O_{7-x}$ superconducting tape," IEEE Trans. Appl. Supercond.., vol. 13, pp. 2532-2534, 2003.   DOI   ScienceOn
7 T. Izumi, M. Yoshizumi, M. Miura, K. Nakaoka, Y. Ichikawa, Y. Sutoh, S. Miyata, H. Fukushima, Y. Yamada, Y. Shiohara, "Present status and strategy of reel-to-reel TFA-MOD process for coated conductors," Physica C, vol. 469, pp. 1322-1325, 2009.   DOI   ScienceOn
8 J. G.Bednorz, K. A. Muller, "Possible High Tc Superconductivity in the Ba-La-Cu-O System," Z. Phys. B, vol. 64, pp. 189-193, 1986   DOI
9 Y. Takagi, K. Nakaoka, T. Nakamura, M. Yoshizumi, T. Kiss, T. Izumi, Y. Shiohara, "Effect of interim annealing on mechanical strength of TFA-MOD derived YBCO coated conductors," Physics Procedia, to be published.
10 T. Yoshida, A. Ibi, T. Takahashi, M. Yoshizumi, T. Izumi, Y. Shiohara, "Fabrication of $Eu_1Ba_2Cu_3O_{7-d}+BaHfO_3$ coated conductors with 141 A/cm-w under 3 T at 77 K by IBAD/PLD process," Physics Procedia, to be published.
11 K. Kimura, R. Hironaga, Y. Takahashi, T. Koizumi, T. Hasegawa, K. Higashikawa, M. Inoue, T. Kiss, T. Nakamura, M. Yoshizumi, T. Izumi, Y. Shiohara, "Improvement of in-field properties for long REBCO coated conductors fabricated by the TFA-MOD method using batch process," Physics Procedia, to be published.
12 Ibrahim Kesgin, Goran Majkic, and Venkat Selvamanickam, "Fully filamentized HTS coated conductor via striation and selective electroplating," Physica C, vol. 486, pp.43-50, 2013.   DOI   ScienceOn
13 A. Goyal, S. Kang, K. J. Leonard, P. M. Martin, A. A. Gapud, M. Varela, M. Paranthaman, A. O. Ijaduola, E. D. Specht, J. R. Thompson, D. K. Christen, S. J. Pennycook and F. A. List, "Irradiation-free, columnar defects comprised of self-assembled nanodots and nanorods resulting in strongly enhanced flux-pinning in $YBa_2Cu_3O_{7-{\delta}}$ films," Supercond. Sci. Technol., vol. 18, pp. 1533-1538, 2005.   DOI   ScienceOn
14 M. Ohya, H. Yumura, T. Masuda, N. Amemiya, A. Ishiyama, T. Ohkuma, "Design and evaluation of 66 kV-class HTS power cable using REBCO wires, " Physica C, vol. 471, pp. 1279-1282, 2011.   DOI   ScienceOn
15 H. Maeda, Y. Tanaka, M. Fukutomo and T. Asano, "A New High-Tc Oxide Superconductor without a Rare Earth Element," Jpn. J. Appli. Phys., vol. 27, pp.209-210, 1988.
16 A. Tomioka, T. Bohno, S. Kakami, M. Isozaki, K. Watanabe, K. Toyama, S. Sugiyama, M. Konno, Y. Gosho, H. Okamoto, H. Hayashi, T. Tsutsumi, M. Iwakuma, T. Saito, K. Tanabe, Y. Shiohara, "The short-circuit test results of 6.9 kV/2.3 kV 400 kVA-class YBCO model transformer with fault current limiting function," Physica C, vol. 484, pp. 239-241, 2013.   DOI   ScienceOn
17 Y. Yamada, K. Takahashi, H. Kobayashi, M. Konishi, T. Watanabe, A. Ibi, T. Kato, T. Hirayama, Y. Shiohara, "Epitaxial nanostructure and defects effective for pinning in Y(RE)$Ba_2Cu_3O_{7-x}$ coated conductors," Appl. Phys. Lett., vol. 87, pp. 132502, 2005.   DOI   ScienceOn
18 Y. Shiohara, Y. Kito, and T. Izumi, "Highlights in R&D for coated conductors in Japan," Physica C, vol. 445, pp.496-503, 2006.
19 M. K. Wu, J. R. Ashburn, C. J. Torng, P. H. Hor, R. L. Meng, L. Gao , Z. J. Huang, Y. Q. Wang and C. W. Chu, "Superconductivity at 93K in a new mixed-phase Y-Ba-Cu-O compound system at ambient pressure," Phys. Rev. Lett., vol. 58, pp. 908-910, 1987.   DOI   ScienceOn
20 Y. Shiohara, T. Taneda, M. Yoshizumi, "Overview of Materials and Power Applications of Coated Conductors Project, "Jpn. J. Appli. Phys., vol. 51, pp. 010007, 2012.   DOI
21 T. Izumi, "Achievements in M-PACC Project and Future Prospects on R&D of Coated Conductors in Japan," Physics Procedia, to be published.
22 Y. Iijima, N. Tanabe, Y. Ikeno and O. Kohno, "Biaxially aligned YBa2Cu3O7-x thin film tapes," Physica C, vol. 185-189, pp. 1959-1960, 1991.   DOI   ScienceOn
23 H. Tobita, K. Notoh, K. Higashikawa, M. Inoue, T. Kiss, T. Kato, T. Hirayama, M. Yoshizumi, T. Izumi and Y. Shiohara, "Fabrication of $BaHfO_3$ doped $Gd_1Ba_2Cu_3O_{7-{\delta}}$ coated conductors with the high Ic of 85 A/cm-w under 3 T at liquid nitrogen temperature (77 K)," Supercond. Sci. Technol., vol. 25, pp. 062002, 2012.   DOI   ScienceOn
24 K. Kakimoto, M. Igarashi, S. Hanyu, Y. Sutoh, T. Takemoto, T. Hayashida, Y. Hanada, N. Nakamura, R. Kikutake, H. Kutami, Y. Iijima, T. Saitoh Long RE123 coated conductors with high critical current over 500 A/cm by IBAD/PLD technique, " Physica C, vol. 471, pp. 929-931, 2011.   DOI   ScienceOn
25 T. Masuda, H. Yumura, M. Watanabe, H.Takigawa, Y. Ashibe, C. Suzawa, T. Kato, Y. Yamada, K. Sato, S. Isojima, C. Weber, A. Dada, J. R. Spadafore, "Design and experimental results for Albany HTS cable," IEEE Trans. Appl. Supercond., vol. 15, pp. 1806-1809, 2005.   DOI   ScienceOn
26 M. Yagi, S. Mukoyama, N. Amemiya, A. Ishiyama, X. Wang, Y. Aoki, T. Saito, T. Ohkuma, O. Maruyama, ". Progress of 275 kV-3 kA YBCO HTS cable," Physica C, vol. 471, pp. 1274-1278, 2011.   DOI   ScienceOn