• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.170-173
• /
• 2006

[ $CuInS_2$ ] filims were appeared from 0.84 to 1.27 of Cu/In composition ratio and sulfur composition ratios of $CuInS_2$ thin films fabricated, Also when Cu/In composition ratio was 1.03, $CuInS_2$ thin film with chalcopyrite structure had the highest XRD peak (112). And lattice constant (a) of and grain size of the film tin s ambient were appeared a little larger than those in only Vacuum The films in S ambient were p-type with resistive of around $10^{-1}{\Omega}cm$ and optical energy band gaps of the films in S ambient were appeared a little larger than those in only Vacuum. Analysis of the optical energy band gap of $CuInS_2$ thin films a value of 1.53eV.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.254-256
• /
• 2015

Effect of growth temperature ($T_g$) on the structural and optical properties of $In_{0.5}Ga_{0.5}As$ atomic layer epitaxial (ALE) quantum dots (QDs) is investigated in the range of $T_g=480-510^{\circ}C$. $In_{0.5}Ga_{0.5}As$ ALE QDs consist of 5 periods of short-period superlattices (SPSs) of 1 monolayer-thick InAs and GaAs. Number of coalescent QDs decreases as $T_g$ increases, and they disappear at $T_g=510^{\circ}C$. As $T_g$ increases in the range of $480-495^{\circ}C$, sizes of QDs increase, and densities of QDs decrease due to merge of QDs. On the contrary, although sizes of QDs are maintained at $T_g=495-510^{\circ}C$, densities of QDs decrease. This is attributed to the desorption of material-mainly indium-during the growth interruption. This conjecture is supported by the optical properties of the QDs as a function of $T_g$. As a result, we propose that optimum growth temperature of the QD is $495^{\circ}C$ with less repetition of SPSs than 5.

• 한국재료학회지
• /
• 제28권2호
• /
• pp.101-107
• /
• 2018

Li-incorporated ZnO thin films were deposited by using ultrasonic-assisted spray pyrolysis deposition (SPD) system. To investigate the effect of Li-incorporation on the performance of ZnO thin films, the structural, electrical, and optical properites of the ZnO thin films were analyzed by means of X-ray diffraction (XRD), field-emssion scanning electron microscopy (FE-SEM), Hall effect measurement, and UV-Vis spectrophotometry with variation of the Li concentraion in the ZnO sources. Without incorporation of Li element, the ZnO surface showed large spiral domains. As the Li content increases, the size of spiral domains decreased gradually, and finally formed mixed small grain and one-dimensional nanorod-like structures on the surface. This morphological evolution was explained based on an anti-surfactant effect of Li atoms on the ZnO growth surface. In addition, the Li-incorporation changed the optical and electrical properties of the ZnO thin films by modifying the crystalline defect structures by doping effects.

• 한국재료학회지
• /
• 제26권4호
• /
• pp.222-227
• /
• 2016

Tin oxides have been studied for various applications such as gas detecting materials, transparent electrodes, transparent devices, and solar cells. p-type SnO is a promising transparent oxide semiconductor because of its high optical transparency and excellent electrical properties. In this study, we fabricated p-type SnO thin film using rf magnetron sputtering with an SnO/Sn composite target; we examined the effects of various oxygen flow rates on the SnO thin films. We fundamentally investigated the structural, optical, and electrical properties of the p-type SnO thin films utilizing X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV/Vis spectrometry, and Hall Effect measurement. A p-type SnO thin film of $P_{O2}=3%$ was obtained with > 80% transmittance, carrier concentration of $1.12{\times}10^{18}cm^{-3}$, and mobility of $1.18cm^2V^{-1}s^{-1}$. With increasing of the oxygen partial pressure, electrical conductivity transition from p-type to n-type was observed in the SnO crystal structure.

• 공업화학
• /
• 제21권5호
• /
• pp.564-569
• /
• 2010

박막 및 디스플레이 분야에서는 광학 부품소재의 우수한 광 투과성과 투명성을 요구하는 수요가 증가함에 따라 우수한 반사방지 특성의 부여에 대하여 관심이 집중되고 있는 실정이다. 본 연구에서는 반사방지 기능을 부여하기 위하여 졸-겔법에 의한 수열합성법을 통하여 기저 물질 표면에 산화알루미늄을 나노 크기 꽃 형태의 프레임 구조를 가진 단일 산화물층을 형성시키고자 하였다. 코팅 층 시편의 특성은 UV-Vis 분광기, FT-IR 분광기, XRD 및 FE-SEM을 이용하여 분석하였다. 알루미나 졸이 코팅된 시편들의 모폴로지는 수열합성의 온도와 시간 및 초음파 제공에 의해 조절되도록 하였다. 꽃 형태의 나노 프레임 구조 형태로 구성된 코팅 층에서 높은 광투과율과 반사방지특성이 발현되었다.

• 한국세라믹학회지
• /
• 제50권4호
• /
• pp.294-300
• /
• 2013

The effect of chemical treatments of porous silicon in organic solvents on its nanostructural and optical features was investigated. When the porous Si was dipped in the organic solvent with various PH values, the morphological, chemical, and structural properties of the porous silicon was sensitively affected by the chemical conditions of the solvents. The size of silicon nanocrystallites in the porous silicon decreased from 5.4 to 3.1 nm with increasing pH values from 1 to 14. After the samples were dipped in the organic solvents, the Si-O-H bonding intensity was increased while that of Si-H bonding decreased. Photoluminescence peaks shifted to a shorter wavelength region in the range of 583 to 735 nm as the pH value increased. PL intensity was affected by the size as well as the volume fraction of the nanocrystalline silicon in the porous silicon.

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.129-136
• /
• 2022

We propose a photonic crystal fiber (PCF) with a slotted porous core and elliptical-hole cladding, for high birefringence in the terahertz regime. Asymmetry in the guided mode is obtained mainly by using arrays of elliptical air holes in the TOPAS^® polymer cladding. We investigate the tradeoff between several structural parameters and find optimized values that can have a high birefringence while satisfying the single-mode condition. The optical properties in the terahertz regime are thoroughly analyzed in numerical simulations, using a full-vector finite-element method with the perfectly-matched-layer condition. In an optimal design, the proposed photonic crystal fiber shows a high birefringence of 8.80 × 10^-2 and an effective material loss of 0.07 cm^-1 at a frequency of 1 THz, satisfying the single-mode-guidance condition at the same time. The proposed PCF would be useful for various polarization-management applications in the terahertz range.

• 공업화학
• /
• 제21권2호
• /
• pp.224-229
• /
• 2010

Transparent conducting oxide (TCO) 박막은 평판 디스플레이 산업에 널리 사용되고 있다. 화학적으로 우수한 투명전도성 Indium Zinc Oxide (IZO) 필름은 Indium Tin Oxide (ITO) 필름의 대체 물질로 관심을 끌고 있다. 본 연구에서는 90 : 10 wt%의 $In_2O_3$와 ZnO를 혼합하여 만든 타겟으로 전자빔 증착법을 이용하여 polynorbornene (PNB) 기판 위에 IZO 박막을 제조하였다. UV/Visible spectrophotometer, 4-Point Probe를 이용하여 증착 두께와 산소도입 속도에 따른 IZO 필름의 전기적 및 광학적 특성을 연구하였으며, SEM, XRD 및 XPS를 이용하여 증착된 IZO의 구조적 특성 및 표면조성비를 연구하였다.

• 한국전기전자재료학회논문지
• /
• 제27권5호
• /
• pp.269-275
• /
• 2014

In this study, chemical bath deposition method was used to grow Zinc sulfide(ZnS) thin films from $NH_3/SC(NH_2)_2/ZnSO_4$ solutions at $90^{\circ}C$. ZnS thin films have been prepared onto ITO glass. The concentrations of $ZnSO_4$ and $NH_3$ were varied while the concentration of Thiourea was fixed in 0.52 M. Structural, optical, electrical characteristic of ZnS thin films were measured. The physical and optical properties of different ZnS thin films were influenced severely by the concentration of the two reacting chemicals. The optimal concentration of $ZnSO_4$ and $NH_3$ was 0.085 M and 1.6 M, respectively.

• 한국결정성장학회지
• /
• 제18권2호
• /
• pp.76-80
• /
• 2008

본 연구에서는 ATO 박막의 전도 특성향상을 위하여 RF 마그네트론 스퍼터링을 이용하여, 6 wt%의 Sb가 첨가된 $SnO_2$ 박막을 합성을 진행하였으며, 박막합성시 스퍼터링 가스인 아르곤(Ar)과 반응가스인 산소($O_2$)의 분압 비율의 증가에 따른 ATO 박막의 구조적, 전기적, 광학적 특성들의 고찰하였다. 결과적으로 산소/아르곤의 비율이 0.11에서 $8{\times}10^{-3}[{\Omega}{\cdot}cm]$의 비저항과 85.17%, 그리고 retile 구조의 이상적인 전도특성과 투과특성, 그리고 결정화를 이룬 ATO 박막 얻었다.