• Journal of Preventive Medicine and Public Health
• /
• v.34 no.4
• /
• pp.427-436
• /
• 2001

Objective : To estimate the prevalence of congenital heart disease from the 1990 student heart disease screening program. Methods : The heart disease screening program for elementary students was conducted in Kyonggi-do, in 1998. The subjects of the present study comprised the 40,402 students who attended the schools in the catchment area of a collaborative university hospital and who participated in the primary examination. The congenital heart disease (CHD) patients were initially identified through a questionnaire about prior medical history, and further through diagnostic tests & medical examinations in the secondary & the tertiary examinations. Certain assumptions were used in the estimation of the number of CHD cases among non-participants of the secondary & tertiary examinations. The overall prevalence of CHD was estimated by adding the CHD detection rates of the participants and the estimated prevalence of the non-participants. Results : Among the 40,402 primary participants, 1,655 were referred further, of whom 79.1% (1,309) participated in the secondary examination. Of these, 121 were referred to the tertiary examination, with a participation rate at this last stage of 80.2%. The positive predictive value (PPV) of the screening tools was the highest when the results of both EKG and the questionnaire were positive. Because 85.9% of the detected cases had a past history of CHD, PPV was higher when the selection criteria in the questionnaire included past CHD history than when it didnt. The CHD defection rate among the participants was 1.76 cases/1,000 and the presumed number of cases among the non-participants was 31; giving an estimated final CHD prevalence of 2.52 cases/1,000 (95% CI : 2.06-3.06). Among the identified cases of CHD, VSD (52.8%) was the most common, followed by PDA (9.7%), TOF (9.7%) & PS (9.7%). Conclusion : Because the characteristics of the non-participants differed from those of the participants, the estimation of prevalence was influenced by the participation rate. Of the detected cases, 85.9% had a past history of diagnosis or operation for CMD. These findings suggested that the prevalence estimated in this study may be an underestimation of the actual condition. Therefore, a birth cohort study is required in order to more accurately estimate the prevalence and the effects of the program.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.325-330
• /
• 2004

Several kinds of low voltage cables have been used in nuclear power plants for the supply of electric power, supervision, and the propagation of control signals. These low voltage tables must be inspected for safe and stable operation of nuclear power plants. In particular, the degradation diagnosis to estimate the integrity of low voltage rabies has recently been emphasized according to the long use of nuclear power plants. In order to evaluate their degradation, the surrounding temperature, hardness of insulation material, elongation at breaking point (EAB), etc. have been used. However, the measurement of temperature or hardness is not useful because of the absence of quantitative criteria; the inspection of a sample requires turning off of the power plant power; and, the electrical inspection method is not sufficiently sensitive from the initial through the middle stage of degradation. In this research, based on the theory that the ultrasonic velocity changes with relation to the degradation of the material, we measured the ultrasonic velocity as low voltage cables were degraded. To this end, an ultrasonic degradation diagnosis device was developed and used to measure the ultrasonic velocity with the clothing on the cable, and it was confirmed that the ultrasonic velocity changes according to the degradation of low voltage cables. The low voltage cables used in nuclear power plants were degraded at an accelerated rate, and EAB was measured in a tensile test conducted after the measurement of ultrasonic velocity. With the increasing degradation degree, the ultrasonic velocity decreased, whose potential as a useful parameter for the quantitative degradation evaluation was thus confirmed.

• Journal of Information Management
• /
• v.41 no.4
• /
• pp.187-204
• /
• 2010

This study shows evaluation of how much OASIS meets "the korean web content accessibility guidelines" and analysis of some of the accessibility problems and their solutions in OASIS(Oriental Medicine Advanced Searching Integrated System) which is the only web site that offers papers and project information related to Traditional Medicine in Korea. The evaluation criteria to determine if OASIS is accessible is classified into four sub items; Perceivable - if information and user interface components is presentable to users in ways they can perceive, Operable - if user interface components and navigation are operable, Understandable - if information and the operation of user interface are understandable, Robust - if content is robust enough that it can be interpreted reliably by a wide variety of user agents, including assistive technologies. Based on the measured results, OASIS has just been redesigned and implemented in more accessible and effective way. OASIS that improves web accessibility for the disabled is expected to help them study oriental medicine more easily and conveniently by providing equal access and equal opportunity to use the web.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.577-583
• /
• 2017

Objective : Laminoplasty is an effective surgical method for treating cervical degenerative disease. However, postoperative complications such as kyphosis, restriction of neck motion, and instability are often reported. Despite sufficient preoperative lordosis, this procedure often aggravates the lordotic curve of the cervical spine and straightens cervical alignment. Hence, it is important to examine preoperative risk factors associated with postoperative kyphotic alignment changes. Our study aimed to investigate preoperative radiologic parameters associated with kyphotic deformity post laminoplasty. Methods : We retrospectively reviewed the medical records of 49 patients who underwent open door laminoplasty for cervical spondylotic myelopathy (CSM) or ossification of the posterior longitudinal ligament (OPLL) at Pusan National University Yangsan Hospital between January 2011 and December 2015. Inclusion criteria were as follows : 1) preoperative diagnosis of OPLL or CSM, 2) no previous history of cervical spinal surgery, cervical trauma, tumor, or infection, 3) minimum of one-year follow-up post laminoplasty with proper radiologic examinations performed in outpatient clinics, and 4) cases showing C7 and T1 vertebral body in the preoperative cervical sagittal plane. The radiologic parameters examined included C2-C7 Cobb angles, T1 slope, C2-C7 sagittal vertical axis (SVA), range of motion (ROM) from C2-C7, segmental instability, and T2 signal change observed on magnetic resonance imaging (MRI). Clinical factors examined included preoperative modified Japanese Orthopedic Association scores, disease classification, duration of symptoms, and the range of operation levels. Results : Mean preoperative sagittal alignment was $13.01^{\circ}$ lordotic; $6.94^{\circ}$ lordotic postoperatively. Percentage of postoperative kyphosis was 80%. Patients were subdivided into two groups according to postoperative Cobb angle change; a control group (n=22) and kyphotic group (n=27). The kyphotic group consisted of patients with more than $5^{\circ}$ kyphotic angle change postoperatively. There were no differences in age, sex, C2-C7 Cobb angle, T1 slope, C2-C7 SVA, ROM from C2-C7, segmental instability, or T2 signal change. Multiple regression analysis revealed T1 slope had a strong relationship with postoperative cervical kyphosis. Likewise, correlation analysis revealed there was a statistical significance between T1 slope and postoperative Cobb angle change (p=0.035), and that there was a statistically significant relationship between T1 slope and C2-C7 SVA (p=0.001). Patients with higher preoperative T1 slope demonstrated loss of lordotic curvature postoperatively. Conclusion : Laminoplasty has a high probability of aggravating sagittal balance of the cervical spine. T1 slope is a good predictor of postoperative kyphotic changes of the cervical spine. Similarly, T1 slope is strongly correlated with C2-C7 SVA.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.15-30
• /
• 2020

Recently, it is increasing a amount of installed solar-cell rapidly, and end-of-life photovoltaic(ELP) modules are generated in according to the reduction of cell efficiency largely. Recycling of ELP modules are begun at an advanced nation already, but there are bring about environmental contamination and resource recovery problems owing to not treated ELP modules because of economic cost completely. First of all, there were researched basic study for treatment conditions of used solar cell inspection, dismantling of aluminum frame, crushing / grinding & separation of tempered glass, removal of back sheet & EVA film, leaching & precipitation recovery of valuable metals and treatment of waste water. Therefore, we establish optimum conditions through carried out of designed apparatus, installation of equipment, test operation & trouble shooting in scale of 1ton/day pilot plant test. Following to economic review, it does have the economic efficiency until to the case of tempered glass recovery, but does not have the economic value in case of total processes until to recover the valuable metals. However, there are guaranteed economic value if we are gained a large amount of the expenses through EPR supported system. It was confirmed the commercialized possibility of ELP modules recycling if there were established on the collecting ELP modules, reusing criteria, economical technology, enactment of directives and enforcement of EPR supported system efficiently.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.5
• /
• pp.595-603
• /
• 2019

To alleviate the demand on private car that is constantly increasing, Busan Metropolitan City (BMC) has established Bus Rapid Transit (BRT) to revitalize public transportation. But there are no unified lane system between BRT and general bus stations, which makes off-lane turning general bus to contribute to congestion. And as the bottleneck phenomenon at entrance/exit accelerates the congestion, there has been huge dissatisfaction among commuting drivers. Therefore, this study identifies efficient methods to operate better through measuring civilian awareness. We evaluate both satisfaction and drawbacks on BRT service with Importance-Performance Analysis (IPA). We first distinguish the groups by the awareness on BRT and their main transit usage, and then clarify the difference between the groups. And as a result, the group who is positive to BRT and uses buses often demands improvement in bus indoor comfort and curbing jaywalking. On the other hand, group who is negative to BRT and uses private cars often demands improvement in lane changing and the moving speed of private cars. We next examines the groups with MDPREF, one method of Multidimensional Scaling (MDS). And we have clarified that the evaluating criteria and the individual attributes of the groups corresponds very well.

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.662-669
• /
• 2010

To develop the manufacturing methods for the blanket first wall (FW) of the International Thermonuclear Experimental Reactor (ITER) and to verify the integrity of the joint, Be/Cu mockups were fabricated and tested at the KoHLT-1 (Korea Heat Load Test facility), a graphite heater facility located at the Korea Atomic Energy Research Institute (KAERI). Since Be and Cu joining is the focus of the present study, the fabricated mockups had a CuCrZr heat sink joined with three Be tiles as an armor material, unlike the original ITER blanket FW, which has a stainless steel structure and coolant tubes. Hot isostatic pressing (HIP) was carried out at $580^{\circ}C$ and 100 MPa for 2 hours as the method for Be/Cu joining. Three interlayers, namely, $1{\mu}mCr/10{\mu}mCu$, $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$, and $5{\mu}mTi/10{\mu}mCu$ were applied as a coating to the Be tiles by a physical vapor deposition (PVD) method. A shear test was performed with the specimens, which were fabricated by the same methods as those used to fabricate the mockups. The average values were 125 MPa to 180 MPa, and the samples with the $1{\mu}mCr/10{\mu}mCu$ interlayer showed the lowest value. No defect or delamination was found in the joints of the mockups by the developed ultrasonic test using a flat-type probe with a 10 MHz frequency and a 0.25 inch diameter. High heat flux (HHF) tests were performed at $1.0\;MW/m^2$ heat flux for each mockup using the given conditions, and the results were analyzed by ANSYS-CFX code. For the test criteria, an expected fatigue lifetime about 1,000 cycles was obtained by analysis with ANSYS-mechanical code. Mockups using the interlayers of $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$ and $5{\mu}mTi/10{\mu}mCu$ survived up to 1,100 cycles over the required number of cycles. However, one of the Be tiles in the other two mockups using the $1{\mu}mCr/10{\mu}mCu$ interlayer was detached during the screening test, and others were detached by discharge after 862 cycles. The integrity of the joints using the proposed interlayers was proven by the HHF test, but the other interlayer requires more study before it can be used for the joining of Be to Cu. Moreover, it was confirmed that the measured temperatures agreed well with the analysis temperatures, which were used to estimate the lifetime and that the developed facility showed its capability of the long time operation.

• Journal of Korean Society of Archives and Records Management
• /
• v.21 no.3
• /
• pp.227-246
• /
• 2021

The study seeks to analyze the procedures and methods of preparing the records management reference table of the electronic human resource management system dataset, the roles of participating organizations, and the contents of each management reference table area from the records manager's perspective to help the person in charge of establishing the management reference table. Improvement plans were suggested based on the problems that appeared during the process of preparing the reference table. As a major improvement plan, a separate selecting policy at the level of the national archives should be designed for the national important dataset records in the government information system, which should be operated such that it preserves the entire dataset rather than a part. It is necessary to set the unit function-data table-unstructured data mapping data as mandatory items, and the selection and management criteria for unstructured data that significantly influence system operation should be additionally prepared. Regarding the setting of the disposition delay period, because there is an aspect of increasing complexity, it is deemed desirable to operate it by integrating related unit functions or setting the retention period longer.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.14.1-14.11
• /
• 2020

Background: The purpose of this study is to introduce our modified disc plication technique using MITEK mini anchors and to evaluate the clinical outcome for patients with internal derangement (ID) of the temporomandibular joint (TMJ). Patients and methods: We evaluated 65 joints in 46 patients, comprised 32 women and 14 men, who first visited the Asan Medical Center from December 2012 to December 2016. The age of the patients ranged from 14 to 79 years, with a mean age of 36.6 years. The patients presented with joint problems including pain, joint noise, and mouth opening limitation (MOL). Patients who met our inclusion criteria underwent unilateral or bilateral disc repositioning surgery with our minimally invasive disc plication technique using MITEK mini anchors and No. 2-0 Ethibond^® braided polyester sutures. The variables taken into account in this study were the range of maximum mouth opening (MMO), painful symptoms (evaluated with the visual analog scale, VAS), and the type of noise (click, popping, crepitus) in the TMJ. Results: Preoperative examination revealed painful symptoms in 50.7% (n = 35) of the operated joints (n = 69) and the presence of clicks in 56.5% (n = 39). Postoperative examination revealed that 4.3% (n = 3) of the operated joints had painful symptoms with lower intensity than that in the preoperative condition. Additionally, 17.4% (n = 12) had residual noise in the TMJ, among which two were clicking and the other 10 had mild crepitus. The intensity of the postoperative residual noise was significantly decreased in all cases compared to that in the preoperative condition. Among patients with MOL below 38 mm (n = 18), the mean MMO was 31.4 mm preoperatively and 44.2 mm at 6 months postoperatively, with a mean increase of 13.8 mm. A barely visible scar at the operation site was noted during the postoperative observation period, with no significant complications such as facial palsy or permanent occlusal disharmony. Conclusion: Subjective symptoms in all patients improved following the surgery. TMJ disc plication using MITEK mini anchors with our minimally invasive approach may be a feasible and effective surgical option for treating TMJ ID patients who are not responsive to conservative treatment.

• Journal of Digital Convergence
• /
• v.16 no.11
• /
• pp.57-67
• /
• 2018

The purpose of this study is to examine the issues of school arts & culture education policy in Korea, using the four dimensional model of Cooper, Fusarelli, & Randall(2004). Research method is literature analysis, the accumulated policy documents and academic papers were used as the basis data. As a result, the followings are required for effective policy outcome: From the normative dimension, overcoming the pursuit of national growth ideology and bureaucratic rationality; from the structural dimension, securing of practical forms and content through the reform to the teacher mandate system in curriculum operation; from the constituentive dimension, clear division of roles among members through the change of awareness about arts & culture education; and finally from the technical dimension, rational allocation of resources based on firm educational criteria. Building upon the results, promotion of basic academic research, accepting the opinions of arts & culture education parties concerned, expansion of opportunities for cultural art experience of teachers, building up the integrated arts & culture education teacher training system, the reorganization of the teacher training system, and raising the professionalism of teaching artists.