• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.698-703
• /
• 2000

In a computational fluid dynamics, the imposition of open boundary condition has an important part of the accuracy but it is not easy to find the optimal boundary rendition. This difficult is introduced by making artificial boundary in unbounded domairs. Such open boundary requires us to ensure the continuity of all primitive variables because the nature is in continuum. Here we introduce a revised well-conditioned open boundary condition particularly in FEM and apply it to various problems-entrainment, body force, short domains.

• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.37-45
• /
• 2001

Numerical simulation of coextrusion process of viscoelastic fluids within a die has been carried out. In the coextrusion process velocity profile at the outflow boundary is not known a priori, which makes it difficult to impose the proper boundary condition at the outflow boundary. This difficulty has been avoided by using the open boundary condition (OBC) method. In this study, elastic viscous stress splitting (EVSS) formulation with streamline upwind (SU) method has been used in the finite element method. In order to test the validity of the OBC method, comparison between the results of fully developed condition at the outlet and those of OBC has been made for a Newtonian fluid. In the case of upper convected Maxwell (UCM) fluid, the effect of outflow boundary condition on the interface position has been investigated by using two meshes having different downstream lengths. In both cases, the results with the OBC method showed reasonable interface shape. In particular, for the UCM fluid the interface shape calculated with OBC was independent of the downstream length, while the results with the zero traction condition showed oscillation of interface position close to the outlet. Viscosity difference was found to be more important than elasticity difference in determining the final interface position. However, the overshoot of interface position near the con-fluent point increased with elasticity.

• 한국해안해양공학회지
• /
• 제19권2호
• /
• pp.170-178
• /
• 2007

대부분의 포물형 수치모형은 경계 외측의 수심이 해안방향으로 변하지 않는 Snell 법칙을 적용할 수 있는 조건으로 국한한다. 여기에는 기존의 Kirby 방법이 있으며 본 논문에서는 이를 수정한 방법 그리고 Dirichlet 경계조건에 대해 자세히 기술하고 이에 대한 수치실험 결과를 제시하였다. 일정 수심 위에 존재하는 원형 천퇴에 대한 수치실험 결과 계산영역 좌우에 가상 수치 조정구역을 두고 본 Dirichlet 경계조건을 적용한 경우가 파고비의 분포가 가장 작게 왜곡되는 것으로 나타났다.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제2권1호
• /
• pp.63-78
• /
• 1994

This paper deals with the treatment of the open boundary in two-dimensional free-surface wave problems. Two numerical schemes are investigated for the implementation of the open boundary condition. One is to add the artificial damping term to the dynamic free-surface boundary condition, in which the determination of suitable damping coefficient and the damping zone is the most important. The other is a modified Orlanski's method, which is known to be very useful for the uni-directional waves. Using these two schemes, numerical tests have been conducted for a few typical free-surface wave problems. To obtain the numerical solution of the free-surface boundary value problem, the fundamental source-distribution method is used and the fully nonlinear free-surface boundary conditions are applied. The computed results are presented in comparison with those of others for the proof of practicality of these two schemes.

• 대한조선학회논문집
• /
• 제29권3호
• /
• pp.80-89
• /
• 1992

자유표면파 문제에서의 방사조건을 위해 두가지 기법을 적용하여 보았다. 우선, 가상감쇠의 개념을 적용하여 일정한 구간에서 파를 감쇠시킴으로써 열린경계면(open boundary)에서 반사파를 제거하는 방법을 적용하여 보았다. 또 다른 방법으로서는 Orlanski의 방법을 변형하여 적용함으로써 단방향 파동에 대한 방사조건 처리기법을 다루었다. 몇가지의 전형적인 자유표면파문제에 대해 이들 기법을 적용하여 그 유용성을 고찰하였는데, 이들 기법은 그 적용방법이 간단하고 비선형문제에서도 사용될 수 있을 것으로 사료된다. 문제의 해법으로 기본 쏘오스 분포법이 사용되었고 비선형의 자유표면 경계조건이 적용되었다.

• Journal of Mechanical Science and Technology
• /
• 제14권9호
• /
• pp.928-934
• /
• 2000

This paper describes a method developed for the simulation of ring pack lubrication characteristic in an internal combustion engine. In general, the quantity of oil supply for piston ring lubrication may be insufficient in filling the entire volume formed at the interference between the piston ring and the cylinder liner. Thus the oil starvation condition should be considered in analyzing piston ring lubrication. In order to reasonably estimate the amount of oil left over on the cylinder liner, the flow rate at the posterior portion of the interface should be calculated with an adequate boundary condition that confirms flow continuity condition. In this analysis, oil starvation and open-end boundary conditions are considered at the inlet and outlet of the piston rings. The lubrication characteristic of each piston ring is obtained by an iterative method with sequential steps. It is revealed that piston rings are operated under oil starvation in most operating cycles and the result under these conditions are quite different from that with the fully-flooded assumption.

• 한국해안해양공학회지
• /
• 제10권2호
• /
• pp.93-99
• /
• 1998

타원형 유한차분모형에서 개방 경계조건으로 포물선 근사식과 스폰지층 경계를 사용하여 모형의 개량을 도모하였다. 수치기법은 GCG(Generalized conjugate gradient)기법을 사용하였고 구형해저실험에서 포물형 근사식을 사용하여 부적절한 반사파를 상당 부분 제거할 수 있었다. 스폰지층 경계의 경우 2파장 이상의 스폰지층을 사용할 때 포물형 근사식과 유사한 결과를 얻을 수있었다. 직사각형 항만에 대한 실험을 통하여 임의 형상의 대상 해역에도 쉽게 모형을 적용할 수 있음을 확인하였다.

• 한국수학사학회지
• /
• 제16권4호
• /
• pp.107-115
• /
• 2003

The nonlinear fourth order elliptic equations with jumping nonlinearity was modeled by McKenna. We investigate the trends for the researches of the existence of solutions of a fourth order semilinear elliptic boundary value problem with Dirichlet boundary Condition, ${\Delta}^2u{＋}c{\Delta}u=b_1[(u＋1)^{-}1]{＋}b_2u^+$ in ${\Omega}$, where ${\Omega}$ is a bounded open set in $R^N$ with smooth boundary ${\partial}{\Omega}$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.506-511
• /
• 2001

This paper presents how redevelopment of the boundary layer in a backward-facing step flow is affected by boundary conditions imposed on velocity at the inlet, top and exit of the flow. A two-dimensional, laminar, incompressible flow over a backward-facing step with an open top boundary has been computed by using numerical methods of second-order time and spatial accuracy and a fractional-step method that guarantees a divergence-free velocity field at all time. The inlet velocity profile above the step is of Blasius type. Along the top boundary, shear-tree and Dirichlet conditions on the streamwise velocity were considered and at the exit fully-developed and convective boundary conditions were examined. (The vertical velocity at all boundaries were assumed to be zero explicitly or implicitly.) From the computed flow fields, the reattachment on the bottom side of shear layer separated from the tip of the step and succeeding redevelopment of the boundary layer were investigated.

• Korean Journal of Mathematics
• /
• 제17권4호
• /
• pp.451-460
• /
• 2009

We consider the existence of solutions of a nonlinear biharmonic equation with Dirichlet boundary condition, ${\Delta}^2u+c{\Delta}u=f(x, u)$ in ${\Omega}$, where ${\Omega}$ is a bounded open set in $R^N$ with smooth boundary ${\partial}{\Omega}$. We obtain two new results by linking theorem.