• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.567-577
• /
• 1998

When continuous and discontinuous microstrip is analyzed with FDTD(Finite Difference Time Domain) method, we used Berenger's 3D-PML as absorbing boundary condition, and IST(Inner Source Technique) was used for source excitation instead of front excitation that is existing method. In the case using IST, we have observed that analyzed characteristic is not affected by the reduced computational domain of the side and top face in which evanescent field and radiation field is exist. Also, if we control the position of the inner source, we could effectively reject the influence of the reflective wave by mean of imperfective boundary condition. In this paper, by using IST, we have calculated dispersive characteristic and characteristic impedance of the microstrip. And we have calculated magnitude and phase of the scattering coefficient, and obtained equivalent circuit of the open microstrip end.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.04a
• /
• pp.154-159
• /
• 1993

To develop the detailing methods at the ends of flexural shear walls. which are satisfying the ductility requirement corresponding to R = 3.5 and capable of improving the consturctibility, tests of ten isolated cantilever shear walls were carried out under the load condition comprising the cyclic lateral and constant vertical loads. major test parameters include the way of detailing and arrangement of transverse reinforcement in the boundary elements at the ends of walls, and placement of vertical reinforcement. From tests, comparable ductile behavior in test specimens incorporating the channel type of open hoops, compared with those incorporating the regular type of closed hoops, was observed.

• Communications of the Korean Mathematical Society
• /
• v.17 no.1
• /
• pp.37-51
• /
• 2002

Let X be a reflexive Banach space with a uniformly Gateaux differentiable norm, C a nonempty bounded open subset of X, and T a continuous mapping from the closure of C into X which is locally pseudo-contractive mapping on C. We show that if the closed unit ball of X has the fixed point property for nonexpansive self-mappings and T satisfies the following condition: there exists z $\in$ C such that ∥z-T(z)∥<∥x-T(x)∥ for all x on the boundary of C, then the trajectory tlongrightarrowz$_{t}$$\in$C, t$\in$[0, 1) defined by the equation z$_{t}$ = tT(z$_{t}$)+(1-t)z is continuous and strongly converges to a fixed point of T as t longrightarrow 1￣.ow 1￣.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.10
• /
• pp.19-24
• /
• 1995

The majority of problems to which FDTD is being applied involve open structure which require the appropriate scheme to terminate the computational domain. In particular, for the propagation problem of the outgoing waves, a certain type of boundary condition needs to be applied on outer boundaries of the computational domain to generate no reflected waves. In this paper, a new simple technique is presented, which allows the reduced computation time and excellent absorbing characteristics for normal and oblique incident waves on outer boundaries. To illustrate the validity of this method, a numerical calculation for monopole antenna is carried out and the results are compared to measured data. The time-domain properties for circular patch antennas are investicated.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.2
• /
• pp.58-62
• /
• 2004

The shape evolution of the interface void of copper metallization for intergrated circuits under electromigration stress is modeled. A 2-dimensional finite-difference numerical method is employed for computing time evolution of the void shape driven by surface diffusion, and the electrostatic problem is solved by boundary element method. When the diffusion coefficient is isotropic, the numerical results agree well with the known case of wedge-shape void evolution. The numerical results for the anisotropic diffusion coefficient show that the initially circular void evolves to become a fatal slitlike shape when the electron wind force is large, while the shape becomes non-fatal and circular as the electron wind force decreases. The results indicate that the open circuit failure caused by slit-like void shape is far less probable to be observed for copper metallization under a normal electromigration stress condition.

• Journal of computational fluids engineering
• /
• v.2 no.2
• /
• pp.44-50
• /
• 1997

Accurate simulation of jet plume exhausting into the open space as well as onto the opposing wall is of interest both numerically and physically; the latter, from a system designer's point of view. In the current work, Navier-Stokes computation is undertaken to capture the flow pattern of a supersonic jet impinging onto a rectangular duct which deflects the vertical jet horizontally. Of particular interest are the flow structure in the jet exhaust area, pressure pattern and the magnitude of pressure force at the bottom wall. Usefulness of present characteristic boundary condition applied at the exiting plane of the duct is demonstrated by capturing such complex flow structures for different lengths of the deflection duct.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.308-310
• /
• 1997

In this paper, to anlayze electromagnetic distribution, measure the variation of relative permittivity of Glass-epoxy substrate for Computer-main-board and Tenon substrate for handphone or PCS in the frequency range $100[MHz]{\sim}1[GHz]$, in room temperature. To measure relative permittivity, suggested the Microstripline method. As the frequency increase, the variation of relative permittivity of Glass-epoxy is bigger than Tefoln's. And simulate the electromagnetic distribution on the PCBs in the infinite region applying the open boundary condition with these results by Finite Element Method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1010-1015
• /
• 2002

Over the last few decades, noise has played a major role in the development of aircraft engines. The dominant noise is generated by the wake interactions of fan and downstream stator. Engine inlet and exhaust ducts are being fitted with liner materials that aid in damping fan related noise. In this paper, the radiation of duct internal noise from duct open ends with liners is studies via numerical methods. The linearized Euler's equations in generalized curvilinear coordinates are solved by the DRP scheme. The far field sound pressure levels are computed by the Kirchhoff integration method. Through comparison of sound directivity from bell-mouth duct with and without liners, it is shown that radiation from engine inlet is affected by liner effects or a soft wall boundary condition.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.23-32
• /
• 2005

In this paper, the modified coefficient of the orthotropic rigidity for stiffened plates with open ribs is proposed to improve the inaccurate results of the orthotropic plate analysis. For stiffened plates with rectangular and angle ribs having various aspect ratios and boundary conditions, the aspect ratio and the rigidity ratio are selected as parameters and the parametric study on the modified coefficient is performed. Analyzed results of stiffened plates modeling with the isotropic and orthotropic plate element show that the modified coefficient can be expressed as a function of the rigidity ratio for each rib space regardless of the aspect ratio in case of the aspect ratio under 1 and can be represented as a single union function without regard to rib spaces and aspect ratios in the other case. The results also shows that the effects of the boundary condition on the modified coefficient is small and coefficient functions have different values according to rib shapes. The application to examples shows that the modified coefficient of the orthotropic rigidity improves accuracy. Therefore, the orthotropic plate analysis of stiffened plates with open ribs can easily achieve more accurate results using the coefficient function proposed in this study

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.41-49
• /
• 2011

The diffuser which is conventionally adapted to MBR, has problem that decreasing the cleaning effect of membrane module by inflexible air supply due to the occlusion of sludge from diffuser hole. To solve this problem, diffuser structure of submerged module should be improved to discharge sludge which is flow into the diffuser for prevent occlusion in the diffuser. In this study, the structure of the diffuser was reformed to open lower part for preclusion the blocking. And the outlet diameter of the diffuser was drawn through the condition for the depth of water and air rate, to prevent air-leak condition of improved diffuser. Moreover, application is evaluated by comparing test with occlusion effect of the conventional and improved diffuser. From the results, air-water boundary changes are steady with changes of water depth and it shows linear relation about air rate. By using this linear numerical formula, the height of diffuser's outlet can be decided. Also, it displays that it can prevent the occlusion effect during the comparing test. Hereafter, if this diffuser is applied to practical MBR process, the occlusion problem of diffuser will be disappeared.