• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.111-116
• /
• 2001

Waste office paper, photocopied or laser printed, has recently increased along with office automatization. In waste office paper, toner ink is used as the printing medium in place of conventional oil ink. Since toner ink cannot be saponificated by alkali and be decolored by bleaching, different from the case of oil ink, toner remains on regenerated paper as black specks. Although cascade recycling of waste office paper is compelled at present, the demand for low-grade paper is limited. From such circumstances, a new separation process for waste office paper is demanded to achieve parallel recycling. At the first stage of separation studies, the sharpness of separation is evaluated using small separators to obtain fundamental data. In a lab-scale separator, the sample amount of one feed is generally a few grams. However, the sample amount used for brightness, ERIC, and image analysis that are generally used to evaluate the efficiency of deinking are not small for lab-scale tests of these analyses. This paper describes an investigation of a sheet preparation method by a small amount of sample under 0.5g and compares the precision of toner content determination of spectroscopic analysis and image analysis from the viewpoint of separation evaluation. The easiness and convenience of the operation using only general-purpose equipments has also been set as a principle purpose. From the viewpoint of an analysis that yields high precision with a small amount of sample in short time, the method calculating the absorption coefficient from diffuse reflectance in the visible region is the most rational method in this study.

• 유기물자원화
• /
• 제12권2호
• /
• pp.52-60
• /
• 2004

본 연구는 슬러지처분을 위해서 유기성페기물 감량화, 에너지 회수기술 공정시도, 자연순환형 슬러지 처분을 위한 최종 시스템개발의 기초연구이다. 본 연구는 full-규모의 건조시스템과 반자동식 로타리 킬른식 열분해로를 이용하여 실험하였다. 운전매개변수는 온도를 건조는 $160{\sim}175^{\circ}C$와 열분해온도는$450{\sim}800^{\circ}C$로 변화시켜 실험을 실행하였고, 고형물의 열분해 공정의 체류시간은 9min으로 실험을 t실행하였다. 본 연구에서 중요한 실험매개변수는 운전시간, 슬러지 수분함량, 고형물량에 따라 온도를 변화시켜 열분해특성을 연구하였다. 운전시간 9분의 일정한 상태에서 $670^{\circ}C$조건은 탄소쇄 $C_1{\sim}C_3$의 물질의 생성은 증가하였지만, $C_4{\sim}C_6$를 함유한 오일성분은 감소하는 것으로 나타났다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.553-556
• /
• 2013

녹색성장, 에너지절약이 주요시되는 현재, 저 전력 LED를 이용한 조명기기들이 각광을 받고 있다. 이러한 LED 조명 기기를 제어하기위한 다양한 국제 표준이 있는데 대표적으로 사용하는 통신 제어표준은 DMX512 프로토콜이다. DMX512 프로토콜은 조명을 제어하는 표준 프로토콜 중의 하나로 주 무대 조명, 경관 조명 등에서 많이 사용되고 있다. 기존 유선 DMX512 프로토콜로 구현된 조명 시스템은 데이터 전송이 안정적이라는 장점이 있지만 데이터 케이블을 연결해야 됨으로 복잡하고 케이블 연결의 제약이 있는 곳에서 사용할 수 없다는 단점을 가진다. 이것을 해결하기 위해 무선 통신을 이용한 방안들이 제시되었는데, DMX512 데이터 손실 및 단방향 통신이라는 문제점을 가지고 있다. 본 논문에서는 기존의 DMX512 시스템과 호환이 가능한 무손실 양방향 무선 DMX512 시스템을 제안하고 구현하였다. 250kbps, 44Hz의 재생률을 갖는 기존 유선 DMX512 시스템과 연동하여 패킷 손실 없이 동작되는 것을 확인 하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.384-390
• /
• 2011

To evaluate the condition of stator winding insulation in generators that have been operated for a long period of time, diagnostic tests were performed on the stator bars of a 500 MW, 22 kV generator under accelerated thermal and electrical aging procedures. The tests included measurements of AC current (${\Delta}I$), dissipation factor ($tan{\delta}$), partial discharge (PD) magnitude, and capacitance (C). In addition, the AC current test was performed on the stator winding of a 350 MW, 24 kV generator under operation to confirm insulation deterioration. The values of ${\Delta}I$, ${\Delta}tan{\delta}$, and PD magnitude in one stator bar indicated serious insulation deterioration. In another stator bar, the ${\Delta}I$ measurements showed that the insulation was in good condition, whereas the values of ${\Delta}tan{\delta}$ and PD magnitude indicated an incipient stage of insulation deterioration. Measurements of ${\Delta}I$ and PD magnitude in all three phases (A, B, C) of the remaining generator stator windings showed that they were in good condition, although the ${\Delta}tan{\delta}$ measurements suggested that the condition of the insulation should be monitored carefully. Overall analysis of the results suggested that the generator stator windings were in good condition. The patterns of PD magnitude in all three phases (A, B, C) were attributed to internal discharge.

• Archives of Plastic Surgery
• /
• 제36권1호
• /
• pp.109-112
• /
• 2009

Purpose: Squamous cell carcinoma(SCC) of the lower lip is the most common malignant tumor comprising 90% of all lip SCC. The typical picture of SCC of the lower lip is of an ulcerated lesion with raised margins. Surgery is the treatment of choice for SCC of lower lip. Depending on the location and size of the tumor, different types of flaps are used. We used new method - 'both buccal mucosa transposition flap' for the reconstruction of the near total mucosal defect of the lower lip. Methods: This 67 - year - old men presented with the crusted $1cm{\times}1cm$ sized ulceration of the lower lip that was arised 30 years ago. There were no size and color change, except the bleeding and ulceration. At first, We diagnosed the SCC through the incisinal biopsy. Then We performed the wide excision of the tumor and reconstruction of the lower lip. After the excision of the whole tumor, the defect was measured at $8cm{\times}3.5cm$. We designed the buccal mucosa transposition flap taking care to avoid the parotid duct. The flap was made in a triangular shape for the reconstruction of defected lower lip. The donor site defect can be sutured primarily. Results: A patient in this study had no postoperative complications such as necrosis, dehiscence, infection of the flap or donor site. Reconstructed lower lip is relatively close to that of the natural lip; More satisfactory aesthetic and functional results can be obtained by using this technique rather than other techniques. Conclusion: 'Both buccal mucosa transposition flap' is reliable method for the reconstruction of the large lower lip mucosal defect. The operation is simple and performed in one stage, with no postoperative complications. This technique can offer consistently good functional and esthetic outcomes after reconstruction of lower lip mucosal defect.

• 터널과지하공간
• /
• 제25권3호
• /
• pp.255-263
• /
• 2015

화약발파는 광업 및 토목 분야에서 암반굴착을 위한 도구로 많이 사용되는 유용한 방법이지만 주변 환경에 대해서는 종종 위해 요인으로 작용한다. 발파 설계자는 피해를 방지하고 효율을 높일 수 있는 적정 설계를 도출하기 위해 노력하며, 설계 단계에서는 시험 발파나 수치해석적 방법을 이용하여 설계의 적정성 평가를 하는 것이 일반적이다. 수치해석적 방법에서 발파와 같은 동적 하중과 그에 대한 암반의 응답 거동에 영향을 주는 많은 변수들이 입력 자료로 설정되어야 하지만, 신뢰성 있는 물성을 획득하기 어려운 설계 단계에서 입력자료를 어떻게 설정할 것인가, 결과를 어떻게 해석하고 설계에 반영할 것인가는 여전히 어려운 문제로 남아 있다. 본 논문은 화약발파를 이용하여 터널과 같은 지하공동을 굴착할 때 암석의 역학적 특성과 관련된 입력 변수들이 해석 결과에 미치는 영향 정도를 정량적으로 평가함으로써 입력 자료에 대한 중요도를 이해하고 설정지침에 도움을 제공하기 위한 목적으로 작성되었다.

• Archives of Plastic Surgery
• /
• 제32권1호
• /
• pp.93-99
• /
• 2005

In spite of proper maneuver of total knee replacement arthroplasty, some patients suffer from skin necrosis just above the implant. From Mar. 2000 to Jan. 2004, the authors performed reconstruction of knee skin defects after total knee replacement athroplasty. Total 6 cases of flap surgery were performed and patients ranged between 43-years-old to 82-years-old. Rectus femoris perforator based reversed adipofascial flaps were used in 2 cases, medial gastrocnemius muscular island flaps were used in 2 cases and sural artery based on adipofascial rotation flap was used in 1 case. One patient with extended necrosis underwent reconstruction with dual flaps of sural artery based adipofascial rotation flap and medial gastrocnemius muscular island flap. There were no distinctive complication needing additional procedure in all cases during the long term follow up. Reconstruction of necrosis following total knee replacement arthroplasty had several characteristics different from simple knee defect. The patients might have the history of long term steroid usages, excessive skin tension due to implants, underlying disease such as diabetes, rheumatoid disease, and etc. In addition, the early ambulation is mandatory in these patients of total knee replacement arthroplasty. With regards to these special considerations, a single stage and reliable operation must be needed. The authors introduce various reconstruction methods and algorithm that may aid easy decision making.

• Journal of Chest Surgery
• /
• 제30권1호
• /
• pp.88-91
• /
• 1997

복잡 심 기 형을 동반한 선천성 기관협착증은 일반적으로 치명적 인 질환으로 간주되고 있다. 본 논문에서는 수술전에 예상하지 못한 선천성 기도 협착을 동반한 복잡 심기형 환자에서, 체외순환하에 동시 교정술을 성공리에 수행하였기에 보고하고자 한다. 환아는 3개월된 여자로 대동맥 교약증, 심실중격결손증 및 동맥관 개존증의 진단으로 전신마취 유도 후 예상치 못한 기관내 삽관의 어려움으로 선천성 기도협착이 있음을 알게 되었고, 자가심낭을 이용한 전방 기관 성형술 및 대동맥 교약증, 심실중격결손증 및 동맥관개존증의 일차 완전 교정술을 체외순환 하에 동시에 시행하게 되었다. 환아는 술후 2년 1개월이 지난 현재 합병증의 증상없이 순조로운 술후경과를 보이고 있다.

• 한국농공학회지
• /
• 제35권1호
• /
• pp.50-58
• /
• 1993

The sedimentation patterns at a reservoir, important to the reservoir capacity curve were simulated using a depth averaged, two-dimensional sediment transport model, that is capable of depicting velocity distributions and sediment transportation. The Banweol reservoir, whose stage capacity relationships have been surveyed before and after the construction, was selected and the daily inflow rates and stages were simulated using a reservoir operation model(DI-ROM). The applicability of the transport model was tested from the comparisons of simulated sedimentation patterns to the surveyed results. The simulated inflow rates and water level fluctuations at the reservoir during twenty-one years from 1966 to 1986, showed that water levels exceeding 80 percent of the total capacity occurred for 70 percent of the periods and inflow rates less than 5000rn$^3$/day sustained for 54 percent of the spans. Dorminant flow directions were simulated from two streamflow inlets to the dam site. And simulated sediment concentrations were higher near the inlets and lower at the inside of the reservoir. Sediment was deposited heavily near the inlets, and portions of sediments were distributed along the flow paths within the reservoir. The comparisons between the simulation results and the surveyed depositions were partially matched. However, it was not possible to compare two results at the upper parts of the reservoir where dredging was carried out few times for the purpose of reservoir maintenance. This study demonstrates that sedimentation patterns within the reservoir are closely related to incoming sediment and flow rates, water level fluctuations, and flow circulation within the reservoir.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 춘계학술대회
• /
• pp.43-59
• /
• 2012

As contemporary building construction type is getting higher and deeper,construction equipment usage is getting more, and related fatal accidents are on an increasing trend. In these days, due to the deteriorating construction business circumstance, job finding problem of equipment operator, and dumping contract, equipment lease suppliers are putin jeopardy. In high-rise building construction, especially tower crane, mobile elevated work platform and other High place operation cars among construction equipment cause many critical accidents because of drop supply of construction biding bringing out dumping contract could cause unsafe and poor construction management. Because of this, a method was drawn which could grasp the present state of construction equipment management and manage safety of the equipment more easily for accident prevention by choosing 2 kinds of Construction equipment which cause safety accident frequently among the equipment mainly used in construction site. This study suggested a method about construction equipment safety management using "smart phone" base which could be used in safety management for construction equipment by whomever in construction site. After attachment of QR code included safety checklist, It became possible that site managers could check more efficiently by scanning with their smart phone when they inspect equipment. Moreover, by the construction interested who didn't know what and how they have to inspect could point out unsafe condition in the early stage of equipment entering or take unsafe one out of the site by using new smart phone safety checking system is installed, it became possible that critical accident caused by construction equipment was prevented in advance.