• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.65-75
• /
• 2019

Non-Functional Requirements (NFR) play a crucial role during the software development process. Currently, NFRs are considered more important than Functional Requirements and can determine the success of a software system. NFRs can be very complicated to understand due to their subjective manner and especially their conflicting nature. Self-adaptive systems (SAS) are operating in dynamically changing environment. Furthermore, the configuration of the SAS systems is dynamically changing according to the current systems context. This means that the configuration that manages the trade-off between NFRs in this context may not be suitable in another. This is because the NFRs satisfaction is based on a per-context basis. Therefore, one context configuration to satisfy one NFR may produce a conflict with another NFR. Furthermore, current approaches managing Non-Functional Requirements trade-off stops managing them during the system runtime which of concern. To solve this, we propose fragmentizing the NFRs and their alternative solutions in form of Multi-entity Bayesian network fragments. Consequently, when changes occur, our system creates a situation specific Bayesian network to measure the impact of the system's conditions and environmental changes on the NFRs satisfaction. Moreover, it dynamically decides which alternative solution is suitable for the current situation.

• 한국전자통신학회논문지
• /
• 제8권3호
• /
• pp.447-452
• /
• 2013

본 연구에서는 콘센트용 누설전류 감지 및 자동차단 모듈을 개발하였다. 제안된 누설전류 검출 모듈은 저항성 누설전류 검출 칩을 사용한 콘센트용 누설전류 검출 모듈과는 차별화된, 전력 프로세서인 MSP430 MCU(Micro Controller Unit)를 이용하여 합성 누설전류에서 저항성 누설전류를 프로그램으로 분리 검출한다. 제안된 방법으로 구현된 모듈은 저항성 누설전류 5mA 이상에서 조기 검출 및 자동차단 기능이 있을 뿐만 아니라, 저항성 누설전류 검출 기능이 프로그램으로 구현되어 있어 저항성 누설전류 5mA 이하 또는 이상으로도 쉽게 조정이 가능한 장점이 있다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.1-6
• /
• 2006

Hot carrier degradation and roll off characteristics of threshold voltage ($V_{t1}$) on NMOSFETs as I/O transistor are studied as a function of Lightly Doped Drain (LDD) structures. Pocket dose and the combination of Phosphorus (P) and Arsenic (As) dose are applied to control $V_{t1}$ roll off down to the $10\%$ gate length margin. It was seen that the relationship between $V_{t1}$ roll off characteristic and substrate current depends on P dopant dose. For the first time, we found that the n-p-n transistor triggering voltage ($V_{t1}$) depends on drain current, and both $I_{t2}$ and snapback holding voltage ($V_{sp}$) depend on the substrate current by characterization with a transmission line pulse generator. Also it was found that the improved lifetime for hot carrier stress could be obtained by controlling the P dose as loosing the $V_{t1}$ roll off margin. This study suggests that the trade-off characteristic between gate length margin and channel hot carrier (CHC) lifetime in NMOSFETs should be determined by considering Electrostatic Discharge (ESD) characteristic.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.689-692
• /
• 2000

This paper presents a designing for the Off-line UPS usig SMB Flywheel Energy Storage System. This described flywheel energy storage system is designed to replace of the conventional EMB(Electro Mechanical Battery) system. To realize the high efficiency and to minimize the torque ripple the waveform of the inverter output current is controlled to be sinusoidal. The actual performance of the Off-line UPS using flywheel energy storage system is described. The prototype device was manufactured, The experimental result has good characteristics at a time of power transition region and regeneration modes,

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.35-42
• /
• 2016

Developments in power electronics have enabled the widespread application of Pulse Width Modulation (PWM) inverters, notably for connecting renewable systems to the grid. This study demonstrates that a high-quality power can be achieved using a stand-alone inverter, whereby the comparison between the power quality of the stand-alone inverter with battery storage (off-grid) and the power quality of the utility network is presented. Multi-loop control techniques for a single phase stand-alone inverter are used. A capacitor current control is used to give active damping and enhance the transient and steady state inverter performance. A capacitor current control is cheaper than the inductor current control, where a small current sensing resistor is used. The output voltage control is used to improve the system performance and also control the output voltage. The inner control loop uses a proportional gain current controller and the outer loop is implemented using internal model control proportional-integral-derivative to ensure stability. The optimal controls are achieved by using the Sisotool tool in MATLAB/Simulink. The outcome of the control scheme of the numerical model of the stand-alone inverter has a smooth and good dynamic performance, but also a strong robustness to load variations. The numerical model of the stand-alone inverter and its power quality are presented, and the power quality is shown to meet the IEEE 519-2014. Furthermore, the power quality of the off-grid system is measured experimentally and compared with the grid power, showing power quality of off-grid system to be better than that of the utility network.

• 한국전기전자재료학회논문지
• /
• 제24권6호
• /
• pp.433-439
• /
• 2011

Poly Si TFTs (poly silicon thin film transistors) with p channel those are annealed HT (high temperature) with gate poly crystalline silicon and LT (low temperature) with metal gate electrode were fabricated on quartz substrate using the analyzed data and compared according to the activated grade silicon thin films and the size of device channel. The electrical characteristics of HT poly-Si TFTs increased those are the on current, electron mobility and decrease threshold voltage by the quality of particles of active thin films annealed at high temperature. But the on/off current ratio reduced by increase of the off current depend on the hot carrier applied to high gate voltage. Even though the size of the particles annealed at low temperature are bigger than HT poly-Si TFTs due to defect in the activated grade poly crystal silicon and the grain boundary, the characteristics of LT poly-Si TFTs were investigated deterioration phenomena those are decrease the electric off current, electron mobility and increase threshold voltage. The results of transconductance show that slope depend on the quality of particles and the amplitude depend on the size of the active silicon particles.

• 한국잠사곤충학회지
• /
• 제13권1호
• /
• pp.73-78
• /
• 1971

본시험은 공정거래를 기할 수 있도록 진섬유량으로부터 생사의 거래중량을 산정할 수 있는 정량거래방법 을 구명하기 위한한 연구로서 다음과 같은 결과를 얻었다. 1. 거래중량인 정량은 원량에서 연감후무수량을 감한 연감수분량의 원량에 대한 백분률인 연감수분률로 부터 산정하면 생사의 진섬유량을 잘 나타낼 수 있고 재현성이 있어 현행검사보다 합리적이다. 2. 연감수분률로부터 정량을 산정함에 있어서 연감후무수량에 대한 공정가산률은 44%로 함이 적당하다고 판단된다. 3. 섬도검사 잔사인 섬도사의 연감률과 하구의 연감률을 대표할 수 있을 것으로 생각되는 시료사(24타래) 의 연감률 사이에 통계적인 유의차가 없었으므로 섬도사의 연감률은 하구의 연감률을 대표할 수 있다. 4. 우리나라는 연감수분율검사에 의한 정량검사를 실시하면 약 2억원의 이득을 얻을 수 있다.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1925-1933
• /
• 2017

The brushless DC motor's commutation torque ripple is caused by inconsistency in the rate of phase current change. Thus, a method that considers armature resistance is proposed to modulate phase current. The three-phase control strategy, which involves the "open-phase conduction, off-phase pulse width modulation, and maintained non-commutation phase" technique, is applied during commutation at full-speed segments of the motor. Changes in each phase current are analyzed theoretically by establishing mathematical model based on phase current to determine the relative difference among shutdown phase, duty, and motor operating parameters. The turn-on and turn-off phase current change rates are made to be consistent to ensure less non-commutation phase current ripple, then the torque ripple is inhibited. The simulation results show that the phase commutation current and torque ripple coefficient of the proposed method are reduced from 56.9% and 55.5% to 6.8% and 6.1%, respectively. In the experiment system, the pulsation coefficient of the motor phase current is reduced from 40.0% to 16.7% at low speed and 50.0% to 18.8% at high speed. The simulation and experimental results show that the proposed control method significantly inhibits commutation current and torque in the full section.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.17-20
• /
• 2015

Coated conductor is an important candidate for power cable applications due to its high current density. Even for DC power cable transmission, we must study the transport properties of HTS tapes after slow and fast discharge. In order to evaluate relation of the magnetic field with applied current we developed a scanning magnetic field measurements system by employing a Hall probe. This work presents the measurements of the magnetic fields above a coated conductor by varying applied current pattern. In the work, a transport current of 100 A, less than the critical current, is applied to YBCO coated conductor. We measured the residual magnetic field distributions after cut off the transport current with slow and fast operations. The results show differences of the magnetic field profiles and the corresponding current profiles by an inverse solution from the magnetic field measurement between these two operations because of the hysteresis of coated conductor excited by the transport current.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권1호
• /
• pp.94-100
• /
• 2017

Stress drain bias dependent current model is proposed for sub-70-nm p-channel metal-oxide semiconductor field-effect transistors (pMOSFETs) under drain-avalanche-hot-carrier (DAHC-) mechanism. The proposed model describes the both on-current and off-current degradation by using two device parameters: channel length variation (${\Delta}L_{ch}$) and threshold voltage shift (${\Delta}V_{th}$). Also, it is a simple and effective model of predicting reliable circuit operation and standby power consumption.