Browse > Article
http://dx.doi.org/10.9714/psac.2015.17.1.017

Residual magnetic field profiles and their current density profiles of coated conductors for fast and slow cut-off current operations  

Sun, J. (Chubu University)
Tallouli, M. (Chubu University)
Shyshkin, O. (V. N. Karazin Kharkiv National University)
Hamabe, M. (Chubu University)
Watanabe, H. (Chubu University)
Chikumoto, N. (Chubu University)
Yamaguchi, S. (Chubu University)
Publication Information
Progress in Superconductivity and Cryogenics / v.17, no.1, 2015 , pp. 17-20 More about this Journal
Abstract
Coated conductor is an important candidate for power cable applications due to its high current density. Even for DC power cable transmission, we must study the transport properties of HTS tapes after slow and fast discharge. In order to evaluate relation of the magnetic field with applied current we developed a scanning magnetic field measurements system by employing a Hall probe. This work presents the measurements of the magnetic fields above a coated conductor by varying applied current pattern. In the work, a transport current of 100 A, less than the critical current, is applied to YBCO coated conductor. We measured the residual magnetic field distributions after cut off the transport current with slow and fast operations. The results show differences of the magnetic field profiles and the corresponding current profiles by an inverse solution from the magnetic field measurement between these two operations because of the hysteresis of coated conductor excited by the transport current.
Keywords
Coated conductor; Current density; Hall probe; Magnetic field; Power transmission; Residual magnetic field;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Y. Takahashi, Y. Aoki, T. Hasegawa, Y. Iijima, T. Saito, T. Watanabe, I. Hirabayashi, Y. Yamada, T. Maeda, T. Honjo, and Y. Shiohara, "Preparation of YBCO coated conductor by the TFA-MOD method," IEEE Tran. Appl. Supercond., vol. 13, pp. 2508-2511, 2003.   DOI   ScienceOn
2 M. W. Rupich, X. Li, S. Sathyamurthy, C. Thieme, K. Demoranvill, J. Gannon, and S. Fleshler, "Second generation wire development at AMSC," IEEE Trans. Appl. Supercond., vol. 23, p. 6601205, 2013.   DOI   ScienceOn
3 S. Yamaguchi, T. Kawahara, M. Hamabe, H. Watanabe, Y. Ivanov, J. Sun, and A. Iiyoshi, "Experiment of 200-meter sperconducting DC cable system in Chubu University," Physica C, vol. 471, pp. 1300-1303, 2011.   DOI   ScienceOn
4 W.V. Hassenzahl, S.E.C. Eckroad, P.M. Grant, B. Gregory, and S. Nilsson, "A high-power superconducting DC cable," IEEE Trans. Appl. Supercond., vol. 19, pp. 1756-1761, 2009.   DOI   ScienceOn
5 J. Sun, H. Watanambe, M. Hamabe, T. Kawahara, and S. Yamaguchi, "Effects of HTS tape arrangements to increase critical current for the DC power cable," IEEE Trans. Appl. Supercond., vol. 23, p. 5401104, 2013.   DOI   ScienceOn
6 S. Baba, R. Inada, T. Makihara, Y. Nakamura, A. Oota, S. Sakamoto, S. Li, and P.X. Zhang, "Evaluation of remanant field distributions on Bi2223 tapes with oxide barriers by using scanning Hall-probe microscopy," J. Phys.: Conf. Ser., vol. 234, p. 022004, 2010.   DOI
7 C. Gu, T. Qu, and Z. Han, "Measurement and calculation of residual magnetic field in a Bi2223/Ag magnet," IEEE Trans. Appl. Supercond., vol. 17, pp.2394-2397, 2007.   DOI   ScienceOn
8 J. Sun, H. Watanabe, M. Hamabe, N. Yamamoto, T. Kawahara, and S. Yamaguchi, "Critical current behavior of a BSCCO tape in the stacked conductors under different current feeding mode," Physica C: Superconductivity, vol. 494, pp. 297-301, 2013.   DOI
9 R. Inada, S. Baba, R. Ohtsu, T. Makihara, S. Sakamoto, and A. Oota, "Longitudinal uniformity of commercial Bi2223 characterized by scanning Hall-probe," IEEE Trans. Appl. Supercond., vol. 21, pp. 2816-2819, 2011.   DOI   ScienceOn
10 J. Sun, M. Emoto, K. Yoshimura, Y. Ivanov, H. Watamabe, M. Hamabe, T. Kawahara, and S. Yamaguchi, "Development and operation of the measurement system for a 200 m HTS cable," Proc. ICEC 23 - ICMC 2010, pp. 1035-1040, Wroclaw 2011.
11 M. Tallouli, J. Sun, O. Shyshkin, A. Ninomiya, M. Hamabe, H. Wataanbe, N. Chikumoto, S. Kaddour, S. Yamaguchi, "Residual magnetic field measurement of BSCCO and YBCO HTS tapes by a Hall probe," IEEE Transl. Appl. Supercond., Accepted for publication.
12 M. Carrera, X. Granados, J. Amoros, R. Maynou, T. Puig. And X. Oborados, "Current distribution in HTSC tapes obtained by inververse problem calculation," J. Phys.: Conf. Ser., vol. 234, p. 012009, 2010.   DOI